APsystems AP EasyPower App User Guide

: June 15, 2024
: APsystems

Table of Contents

APsystems AP EasyPower App
Install and Use AP EasyPower
Connect (Direct Connect Mode)
Register (Remote Mode)
Monitor & Control (Remote Mode)
Manage Your Information (Remote Mode)
Documents / Resources

APsystems AP EasyPower App

APsystems-AP-EasyPower-App-PRODUCT

APsystems EMEA

Karspeldreef 8, 1101 CJ Amsterdam
Phone: +31 (0)85 3018499
Email:info.emea@APsystems.com
emea.APsystems.com

Introduction

AP EasyPower is a smart home energy management tool that provides local and remote management services for devices. It offers the following features:

Plug-and-Play, fast installation and wiring
Direct connection with Bluetooth
Real-time monitoring
Online diagnosis & maintenance

Install and Use AP EasyPower

Install

iOS:

Go to the App Store
Search AP EasyPower
Download and install
iOS: 10.0 and up

Android:

Go to the Google Play Store
Search AP EasyPower
Download and install
Android: 7.0 and up

Direct Connect Mode

Click Direct Connect. A guiding page is displayed. Click Start.

Connect (Direct Connect Mode)

STEP 1

Once you have directly connected a device, the next time you click Direct Connect, a device page will be displayed, including the devices directly connected before and the Bluetooth’s signal of each device. You can click the device to connect existing devices easily and click Connect New Device to connect a new one.

FAQ

```
1. How do I install AP EasyPower?
```

To install AP EasyPower, follow the instructions below:

1.       *  **iOS:** Go to App Store, search AP EasyPower, and download and install the app. Requires iOS 10.0 and up.

Android: Go to Google Play Store, search AP EasyPower, and download and install the app. Requires Android 7.0 and up.

What is Direct Connect Mode?

Direct Connect Mode allows you to connect devices directly using Bluetooth. Simply click Direct Connect and follow the on-screen instructions.

How do I connect a device in Direct Connect Mode?

To connect a device in Direct Connect Mode, follow these steps:

Click Direct Connect.
A guiding page will be displayed. Click Start.
Once you have directly connected a device, the next time you click Direct Connect, a device page will be displayed showing the devices directly connected before and the Bluetooth signal of each device. You can click on an existing device to connect or click Connect New Device to connect a new one.

Install and Use AP EasyPower

Install iOS

Go to the App Store
Search “AP EasyPower”
Download and install

NOTE

iOS: 10.0 and up

Android

Go to the Google Play Store
Search “AP EasyPower”
Download and install
Android: 7.0 and up

Direct Connect Mode

Click “Direct Connect”.
A guiding page is displayed.
Click “Start”.
Once you have directly connected a device, the next time you click “Direct Connect”, a device page will be displayed, including the devices directly connected before and the Bluetooth’s signal of each device.
You can click the device to connect existing devices easily and click “Connect New Device” to connect a new one.
When connecting, please ensure that the device is running and keep the phone’s Bluetooth turned on
If the distance between the phone and the device is too far or there are obstacles, that may cause connection failure, please try to keep the phone close enough to the device.

Remote Mode

Enter your “Account” and “Password”.
Use Account and Password. The Password is case-sensitive.
Press the “Sign in” button.
On the home page, a list of your installed devices is displayed
If no installation is registered, the list will be empty.
If you need to switch the language, click the “English” at the upper right corner and select the language of your choice.

Connect (Direct Connect Mode)

There are two (2) steps involved in connecting a new device for Direct Connect. All the following introductions take the customer as an example.
Step 1: Connect the device
Step 2: Select the Wi-Fi (Optional)

Step 1, Connect the device

There are two (2) methods to connect a device.
Method 1: [Scan], scan the bar code of the inverter id to connect.
Method 2: [Bluetooth], select the device in the Bluetooth searching list to connect.

Method 1, [Scan] – Recommended

On the scanning page, a scan box is displayed. Scan the inverter ID to connect.
Each device has a unique ID (length: 12) which is located on the front of the device, as well as on the back flap of the device’s shipping box.

Method 2, [Bluetooth]

On the Bluetooth page, a device list is displayed. Select the device to connect.
The Bluetooth alias of the device has the same ending serial number as the device ID.

Step 2, Select the Wi-Fi (Optional)

Select the Wi-Fi to connect, and the device can get remote services.
If the device currently cannot set up the Wi-Fi, you can skip this time. If the device does not need the remote services, you can skip it forever, if you want it in the future, go to the settings page to set it.

Monitor & Control (Direct Connect Mode)

Main (Direct Connect Mode)

On this page, users can visualize
Live Data: The real-time data of the device in the current round, including the power, energy, running time, working status, and cloud status.

Working status

Normal: The device is working normally.
Alarm: The device has alarms and you need to check it.

Network status

Online: The device connects to the cloud service through the internet.
Offline: The device is not connecting to the cloud service through the internet, maybe the device is not connected to the Wi-Fi or the router is down.
Benefits Overview: The lifetime energy produced by the device and the equivalent CO2 reduction.
Pressing the “alarm icon” to check the alarm information if the device status is an alarm.
Pressing the “setting icon” to set the device. The setting page is shown below.

Settings (Direct Connect Mode)

On the setting page, the user can visualize
Device ID: The serial ID of the device
Wi-Fi: The Wi-Fi Name device is connected. If the device does not connect to the Wi-Fi, it will show “Not Connected”. Click it to enter the Set Wi-Fi page to switch Wi-Fi.
Bluetooth: The Bluetooth name of the device
Device: The details information and operations of the device, The user can get the serial ID and mac address, and upgrade the software.
Click “How to switch to ‘remote’ mode” if you want to register an account and monitor your device wherever you are.

Register (Remote Mode)

There are two (2) major steps involved in adding a new installation (registering) in the AP EasyPower. All the following introductions take the customer as an example.

Step 1: Register Account – Enter the user’s personal information.
Step 2: Link Device – Configuring the device information.

Step1, Register Account

Click “New Account
A check list of information is displayed. Fill in all the information and get your own account.

Step2, Link Device

Enter your “Account” and “Password”.
Press the “Sign in” button.
On the home page, an empty list is displayed.
Click “Add Button” or “Add Icon” to enter the device binding process.
There are five (2) major steps involved in binding a new device (registering) for an account. All the following introductions take the customer as an example.
Step 1: Connect the device
Step 2: Select the Wi-Fi
Currently, you can link 2 devices to your account, just repeat the linking device operations until linking all your devices.

Step1, Connect the device

There are two (3) methods to connect a device.
Method 1: [Import], import the device directly connected before.
Method 2: [Scan], scan the bar code of the inverter id to connect.
Method 3: [Bluetooth], select the device in the Bluetooth searching list to connect.

Method 1, [Import]

On the device page, a device list which directly connected before but without registration is displayed. Select the device to bind.
Click “Add New Device” to switch to [Scan] mode.

Method 2, [Scan]

On the scanning page, a scan box is displayed. Scan the inverter ID to connect.
Each device has a unique ID (length: 12) which is located on the front of the device, as well as on the back flap of the device’s shipping box.
Click the button “Bluetooth” at the upper right corner to switch to “Bluetooth” mode.

Method 3, [Bluetooth]

On the Bluetooth page, a device list is displayed. Select the device to connect.
The Bluetooth alias of the device has the same ending serial number as the inverter ID.

Step2, Set the Wi-Fi

Select the Wi-Fi to connect, and the device can get remote services.
In most cases, the failure is caused by the wrong password. Please double-check the password entered. Do not enter the password if the Wi-Fi does not have one.

Monitor & Control (Remote Mode)

Home (Remote Mode)

On the home page, a list of your installed devices is displayed. Users can get the status of each device.
Press on the device card to enter a single device monitor

Main (Remote Mode)

On the main page, user can visualize
Live Data: The real-time data of the device in the current round, including the power, energy, running time, working status, and cloud status.

Working status

Normal: The device is working normally.
Alarm: The device has alarms and you need to check it.

Network status

Online: The device connects to the cloud service through the internet.
Offline: The device is not connecting to the cloud service through the internet, maybe the device is not connected to the Wi-Fi or the router is down.
Benefits Overview: The energy produced by the device and the equivalent CO2 reduction. Users can switch the “Total”, “Month”, and” Today” to get the accumulated data for each period.
Press “alarm icon” to check the alarm information if the device status is the alarm.
Pressing the “setting icon” to set the device.

Data (Remote Mode)

On this page, you can view the detailed data on a single device level:

Per minute
Per day
Per month
Per year

Settings (Remote Mode)

On the setting page, the user can visualize
Device Card: Show the serial ID and alias, click it to edit the alias
Model Name: The device model type name.
Bluetooth: Lock the Bluetooth of the device for security

Data (Remote Mode)

In this page, you can view the detailed data on the system level:

Per minute
Per day
Per month
Per year

Manage Your Information (Remote Mode)

On this page, you can get the account and APP information, and you can reset the account information as well.
Account Card: View the account information and reset it.
Language: Change the APP’s language
About: Get the APP’s information
Logout: Logout the APP

Modify Account Information (Remote Mode)

On this page, you can view the account information and reset it.
Account Details: Including the account name and email
System Information: Including the region, module model, and module maximum power (Pmax), and click to edit
Security Settings: Change the email notification or reset the password
Delete Account: If you do not want this account, delete it
You can enable or disable the function “Allow APsystems to Send New Productions, Services, Meetings and Marketing News” as your choice.

Change APP’s Language (Remote Mode)