WOWOW 2310501Q-AMUS Single Handle Wall Mount Pull Out Sprayer Kitchen Faucet Instruction Manual

WOWOW 2310501Q-AMUS Single Handle Wall Mount Pull Out Sprayer Kitchen Faucet

You may need

For easy installation of your faucet you will need:

To READ ALL the instructions completely before beginning.

To READ ALL warnings, care, and maintenance information.

Cleaning and Care

Care should be given to the cleaning of this product. Although its finish is extremely durable,
It can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.

With 1.8 gpm are compliant with California water efficiency regulations, Complies \with California Proposition 65 and with the Federal Safe Drinking Water Act.

Water Use Information: Z1.8 gpm 6.8L/min, You can choose to replace the current limiting device and face the water pipe square. screened washer (pre- installed in the conical nut)

1.8gpm water face on hoses

Before installing the valves, 4 5 clean the water pipe thoroughly to avoid dirt and deposits.

1. Remove the brass lock nut (5) from the thread rod counter-clockwise, remove the washer (4) and washer (3)

1. Attach flexible hoses under the faucet body.

1. Make sure attach the O-ring(2) to the faucet body.
2. Slide tubes down through mounting hole and faucet on sink.
   Option: If sink is uneven, use silicone under the gasket.

Option: If sink is uneven, use silicone under the gasket.

1. Make sure attach the O-ring(2) to the faucet body.
2. Slide 9.6″ decorated plate with gasket(3) up over tubes and mounting stud.
   Slide tubes down through mounting hole and faucet, 9.6″decorated plate with gasket on sink.

1. Use the triangle fastener(15) when the thickness of sink <5mm.
2. Place Triangle fastener（15） and washer(4) and metal plate(5) over mounting stud(3) under sink. Secure with mounting nut(6), tighten the screws(7) to fix the faucet body

1. Connect pull-out hose (11) with washer (13) to inlet connection(9).
2. Attach weight ball(16) to pull-out hose (11). Make sure the pull-out hose is not blocking by other objects and not touching the ground. The appropriate height for gravity ball installation is 100mm.
3. Attach supply hot(8)and cold lines(10) .
4. If the anglve is G1/2”, please use G3/8” standard pipe connection G1/2” adapter included (12) . Do not overtighten. Turn water back on.

1. Mount spray support assembly and washer
2. turn faucet handles to the full on mixed position.
   Check all connections for leaks. overtighten.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>