AbleNet 10000041 BIGmack Communication Device User Guide
- June 6, 2024
- AbleNet
Table of Contents
Quick Start Guide
BIGmack® communication device
Getting Started
- Add one alkaline 9-volt battery to the device (battery not included). To open the battery door, rotate D-ring counterclockwise and lift up. To lock the battery door, rotate D-right clockwise.
- Turn the device on
- Press and hold the record button until the recording indicator light turns on
- Press and hold colored switch top. Begin speaking into the microphone after you hear a beep.
- When done recording message, release colored switch top
- Press the record button to turn the recording indicator light off
- Adjust volume as needed
- Your device is ready to use
Change Colored Switch Tops
- Remove clear snap cap
- Rotate colored switch top counterclockwise to remove and rotate clockwise to tighten.
- Re-attach clear snap cap
Picture Symbol Overlays
A picture symbol can be placed under the clear snap cap to give additional context to what will happen when the colored switch top is activated. Symbol overlays should fit within a 4.5-in (11.4-cm) circle area.
Play Message With an Accessibility Switch
- Plug an AbleNet accessibility switch with a 1/8-in (3.5-mm) switch to plug into the accessibility switch input jack on the device
- Activate the accessibility switch to play the message on the device
Activate Switch Adapted Toys or Appliances
- Plug your toy or appliance into the 1/8-in (3.5-mm) toy/appliance output jack on the device. Some toys or appliances may require the included plug-to-plug adapter to be used to connect to the device.
- The toy or appliance will activate as long as the message is playing.
Note: Some electrical appliances will require a PowerLink to be activated.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>