ICERIVER KS0 Wallbox eHome Link User Manual

: June 12, 2024
: ICERIVER

Table of Contents

ICERIVER KS0 Wallbox eHome Link
Product Overview
Function
Access Machine
Common Faults and Solutions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ICERIVER KS0 Wallbox eHome Link

KS0 User Manual

Product Overview

Appearance

The KS0 is a product that provides various functions. It has an Ethernet port, a heat sink, a Power Supply Type-C port, a TF card slot, a button, and a USB status light. The interface specifications include a power supply input interface, a USB output interface, a DC power supply interface (65w, 19v = 3.42A), and a USB Type-C power supply interface (Protocol: PD2.0 Input: 65w (max), 20v = 3.25A, 5V==0.5A). Please note that the DC power supply interface and USB Type-C power supply interface cannot be powered at the same time, only by one interface.

Function

The KS0 has various functions. Before starting up, please follow these precautions: check for physical interference causing damage to the machine, beware of electric shock, ensure firm cable connections before powering on, pay attention to electricity safety, do not place flammable and explosive substances around the machine, maintain humidity below 90%, keep the environment clean to prevent foreign objects from entering and damaging the machine, use stable voltage, and place the machine horizontally. It is important to note that the warranty does not cover damage caused by improper environmental conditions or self-disassembling the machine without permission from ICERIVER after-sales team.

Prior to starting up the machine, perform a preliminary inspection: check the package for deformation, check the machine for deformation and breakage, inspect the fan and cable, listen forany strange sounds, and ensure the heat sink is securely attached.It is advised not to disassemble the machine without permission asit will void the warranty.

To start the machine, connect it to Ethernet first and then plug in the power cord. During the startup process, the red and greenstatus lights will be constantly on. After approximately 1 minute, the green status light will start blinking, indicating that the miner has successfully started.

To access the machine, follow these steps:

Obtain the IP address of the machine by downloading andunzipping the batch processing tool provided by ICERIVER. The toolcan be found on the official website: https://www.iceriver.io/tutorial/.
Click the “Detect IP” button in the tool and long press the machine’s button for 1-2 seconds after the pop-up window to retrieve the machine’s IP.

Product Overview

Appearance

Interface specifications

Power supply input interface

| DC power supply interface: 65w, 19v = 3.42A
---|---
USB Type-C power supply interface: Protocol: PD2.0

Input: 65w (max), 20v = 3.25A

USB output interface| 5V==0.5A

DC power supply interface and USB Type-C power supply interface can not be powered at the same time, only by one interface.

Function

Start up
Precautions

Check whether there is physical interference causing damage to the machine and beware of electric shock.
Please check if the cable connection is firm before powering on, and pay attention to the safety of electricity.
Keep the hash board and other parts away from water or exposed to moisture.
Please make sure the ambient temperature is between 0-35°C.
Please make sure to be in an air convection environment.
Please avoid covering the surface of the machine due to the high temperature of the machine surface during operation.
Do not place flammable and explosive substances around the machine during operation.
Please make sure the humidity of the environment is below 90%.
Please keep the environment clean to prevent dust, hair, willow and other foreign objects from entering the machine and causing damage to the machine. Use a stable voltage.
Please place the machine horizontally.
The machine, hash board or board parts being crushed or burned due to improper environment is not covered by the warranty.
Customers should not disassemble the machine by themselves without permission from ICERIVER after-sales team.

Check before start up
Preliminary inspection of the machine before operation:

Check the appearance of the package for deformation.
Check the appearance of the machine for deformation and breakage. Also check the fan andcable.
Check if there is any strange sound in the machine and observe if the heat sink is off.
Note: Please do not disassemble the machine by yourself. The machine will not be covered by the warranty if the user disassembles the machine without permission.

Boot
Please connect the machine to the Ethernet first, and then plug in the power cord. During the startup process, the red and green status lights will be constantly on. After approximately 1 minute, the green status light will start blinking, indicating that the miner has successfully started.

Access Machine

Obtain Machine IP

Obtain the IP address of the machine through download and unzip the batch processing tool provided by our company (please refer to the official website to download: https://www.iceriver.io/tutorial/).
Click the [Detect IP] button and long press the machine’s button for 1-2s after the pop-up window to get the machine IP.

Access Machine

Open your web browser (Chrome browser is recommended) and enter the machine’s IP address in the address bar. You will see the following interface.
Use the default username “admin” and the default login password “12345678” to log in to the machine.

Language Switch

Click [Language] in the upper right corner of the page to switch between Chinese or English

Change Password
To protect your property security, please change the miner password after the first time you turn on the machine.

Click [User Settings], enter the current password and the new password as shown below, and click the [Save] button.
After the password change is completed, you need to log in again with the new password.

Configuring mining pools and wallets
Add

Go to the [Mining Setting] page and find [Pool Configuration].

You can configure three mining pools with the following reference example:
Pool1： stratum+tcp://eu1.kaspa-pool.org:4444
Wallet/Worker： kaspa:ndm9tlsgdmrcha4pg83lwwrka0gjya38teh0g5qc4prapavmh7rkyxuzd6w2w.worker Wallet address Worker name

The password is optional and can be set or not, it does not affect mining.
Click Save and a configuration success window will pop up.
After successful configuration, click [Reboot] and wait for the machine to reboot (do not power off during the reboot process).
The information on the home page shows that the pool is ” connected “, which means the pool is successfully connected.

The default pool configuration is the configuration of our company when testing, please
configure your own mining wallet address before you start mining, please do not use the default
configuration.
If pool 1 is not connected, the machine will automatically connect to pool 2. If pool 2 is not
connected, the machine will automatically connect to pool 3.
If the configuration fails you can configure it again and restart it.

The following mining pools are known to be compatible, and will be continuously updated:

Kaspa-pool
- PPLNS stratum+tcp://eu1.kaspa-pool.org:4444
- SOLO stratum+tcp://eu1.kaspa-pool.org:4441
Woolypooly
- PPLNS stratum+tcp://pool.eu.woolypooly.com:3112
- SOLO stratum+tcp://pool.eu.woolypooly.com:3113
Herominers
- PPLNS stratum+tcp://ru.kaspa.herominers.com:1208
- SOLO stratum+tcp://ru.kaspa.herominers.com:1208
K1pool
- PPLNS stratum+tcp://eu.kaspa.k1pool.com:23112
- SOLO stratum+tcp://eu.kaspasolo.k1pool.com:23114
Accpool
- PPLNS stratum+tcp://acc-pool.pw:16061
F2pool
- PPLNS stratum+tcp://kas-euro.f2pool.com:1400
Kryptex
- PPLNS stratum+tcp://kas.kryptex.network:7777/6666

The above mining pool information is the mining pool address we used for testing purposes. Before connecting to the mining pool, please log in to the respective mining pool’s official website and check if the mining pool address has changed.

Remove

Clear the information in [Pool Configuration] and click [Save] to remove the mining pool.

Adjusting fan speed

Find [Hardware Configuration] in [Mining Setting].
Check [Fan Speed].
Select the fan mode, or manually adjust the speed, click [Save] after modification.

After power on, the fan will start only after successfully connecting to the mining pool and mining program starts, and the fan speed is full speed by default.
The machine will stop mining in sleep mode.
After manually changing the fan speed, the fan speed in [Hardware Configuration] will still show 100%.

View Hashrate Chart

Click [Home] to view the Hashrate Chart.
- After 5 minutes of connecting to the pool, you can view the machine’s hashrate and hashrate chart, the chart is updated every 5 minutes.
- Under Hash board, you can view the machine temperature and fan speed, which can monitor the working status of the machine in real time.

Network Settings
The factory default is DHCP mode, users can set the IP mode according to their needs.
Set static IP:

Click [IP Settings], select Static in [Protocol], fill in the IP information according to the user, andthen click [Save] button.
After saving the configuration, click [Reboot] and wait for the machine to reboot (do not power off during the reboot).

Firmware Upgrade
When the official website releases a new upgrade package, download it and upgrade it via Web.

Click [Firmware Upgrade], select the official upgrade package and click [Upgrade].
Wait for the pop-up window to show success and then click [Reboot] and wait for the machine to reboot (do not power off during the reboot process).
After reboot, the firmware upgrade is successful.

Factory Reset
When the machine has abnormal conditions, you can restore the factory settings through the Button on the machine.

After the green status light starts blinking following the power-up (1 minute after power on), press and hold Button for 20 seconds until the red status light starts blinking. Waiting until the red status light stops blinking and wait for the machine to reboot (do not power off the machine during the reboot process).
After the machine reboot, reconfigure the mining pool and wallet to resume mining.

Shutdown/Reboot
Shutdown

Power off by unplugging the Power Cord.

Reboot

Click [Reboot] in the bottom right corner of the home page, then click [OK] to confirm, then reboot the machine.
- Note: Do not power off the machine during the reboot process.

Common Faults and Solutions

Faults Solutions
Power Supply

Connect the power supply and the red and green status lights does not light up: Check whether the power connector is loose or off, and whether the power cord is inserted tightly.

Network

Network port light does not light up:
Check if the network port is plugged in.

Fan

The fans does not turn after power is applied:
Check if the mining pool is successfully connected.

High Temperature

Machine temperature is too high:

1. Check that the machine is not covered with.
2. Check if the machine is placed in an environment with air convection.
3. External fan of not more than 5V==0.5A for cooling via USB port.

Hashrate does not up to the target hashrate

Hashrate does not up to the target hashrate:

1. Check whether the surface temperature of the machine is too high. High temperature will trigger high temperature protection and cause the machine to downscale, please place the machine in an air convection environment or external fan to cool down the temperature.
2. Short-term hashrate fluctuations, please observe the 12-hour average hashrate.