OxyLED M2110 Solar Lanterns for The Garden User Manual
- June 15, 2024
- OxyLED
Table of Contents
OxyLED M2110 Solar Lanterns for The Garden User Manual
The Solar Light include solar panel and lamp body. After turning the switch from “OFF” to “ON”, Built-in solar panels with rechargeable batteries will automatically turn on at night and off during the day. This product is ideal for decorating outdoor gardens, lawns, yards, balcony, fences, etc.
Use guide
-
Please turn the switch from “OFF” to “ON”, and then place the product in the sun for 5-8 hours. There should be no object around the product to block the sun. If there is dust on the surface of the panel, wipe it clean to maintain efficient charging.
-
This product is an automatic sensing product. When the environment is too bright, such as in the daytime, or under strong light source such as street light, the solar panel will not light up automatically. In these scenarios, if you need to check whether the lamps are working, you need to cover the solar panels to check if the lights are on.
-
When you receive the product for the first time, if the product doesn’t light, it’s not that the product is broken or doesn’t work, it could be that the battery has run out. Please shift the switch from “OFF” into the “ON” position, and then place the product in the sun, do not have objects to block the sun, continuously charge for 8-10 hours, the product can be restored to work.The problem can also be solved by replacing the battery.
-
If the luminaire has other abnormal conditions, such as no light, rapid flashing, short lighting time and etc., these are the signal that the luminaire is out of power. In the case of good weather, the lamp can be restored to work by charging it in the sun for 6-8 hours. Replacing the battery can also solve the problem.
Replacing the Batteries
It is suggested to replace the rechargeable batteries every 12 months to ensure better performance. 1 pc of 400mAh AA Ni-Mh or Ni-Cd rechargeable battery is needed.
- On the bottom of the solar light you will find the battery house.
- Press the manual switch to the “OFF” position.
- Screw open the battery case, remove the old battery, and replace it with a new Ni-Mh or Ni-Cd rechargeable battery.
NOTE : The battery is spring-loaded; press in the opposite side of the spring and lift out the battery. Reverse this process when installing a new battery.
Warning
- This product is not a children’s toy, please keep away from children.
- Do not immerse the product in water.
- Keep the product away from fire or other heat sources.
- Do not dispose of the batteries in the regular trash, municipal waste streams or by fire, as the batteries may leak or explode. Do not open, short-circuit or mutilate the batteries, as this could result in injury. Preserve our environment by recycling the batteries or disposing of them in accordance with local, state or federal regulations.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (7 )this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
DSM1919
Learn more about the EU Declaration of Conformity. Please click below link to
download.
http://files.oxyled.com/dsml919-eu-doc.pdf
Learn more about the UK Declaration of Conformity. Please click below link to
download.
http://files.oxyled.com/dsml919-uk-doc.pdf
M2110
Learn more about the EU Declaration of Conformity. Please click below link to
download.
http://files.oxyled.com/m21l0-eu-doc.pdf
Learn more about the UK Declaration of Conformity. Please click below link to
download.
http://files.oxyled.com/m21l0-uk-doc.pdf