CHAMPION POWER EQUIPMENT 100642 18 Inch 40cc Portable Gas Chainsaw Kit with Carrying Case and Utility Gloves User Guide
- June 15, 2024
- CHAMPION POWER EQUIPMENT
Table of Contents
STARTING THE CHAINSAW
100642 18 Inch 40cc Portable Gas Chainsaw Kit with Carrying Case and
Utility Gloves
BEFORE STARTING THE CHAINSAW
- Mix gasoline with oil.
- Fill the fuel tank.
- Fill the chain oil reservoir with bar and chain oil.
-
Make sure chain brake is enganged.
-
Push the purge bulb 10-20 times until bulb is full of fuel.
-
Pull the choke knob out until a “click” is heard.
-
Pull the starter rope rapidly 1-4 times or until the engine pops.
-
Push the choke knob in.
-
Pull the starter rope rapidly 1-4 times to start the engine.
If engine does not start, repeat steps 3-6. -
Press and hold the throttle lockout and lightly squeeze the throttle to idle the engine.
-
Allow the engine to warm up for 30-60 seconds.
-
Disengage the chain brake.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>