Addlon B0B8MYD7KG 48FT Smart Outdoor String Lights User Manual
- June 15, 2024
- addlon
Table of Contents
USER MANUAL
B0B8MYD7KG 48FT Smart Outdoor String Lights
Smart S14
STRING LIGHTS
Download the Joinin Home APP from App Store or Google Play.
https://a.smart321.com/xqqxxx
Scan the QR code to download
SAFETY INSTRUCTION
IMPORTANT
READ ALL THE SAFETY INFORMATION AND INSTAINSTRUCTIONS BEFORE INSTALLING OR
SERVICING THIS PRODUCT, KEEP THIS MANUAL FOR REFERENCE.
WARNING
RISK OF ELECTRIC SHOCK
-
Sockets used to power smart string lights should comply with all national and local electrical codes.
If you are unsure of compliance requirements please consult your local electrician. -
Do not operate the bulbs without tightening string lights, making sure to unplug the smart string lights during installation to avoid damage to the power cord and lamp assembly during installation.
-
Do not submerge when using on GFCI protection circuits.
-
Do not use in water.Do not use extension cords or places where water may accumulate near water.
Take care to keep the bulb at least 16 feet surface of the water. Keep the plug and socket dry. -
Do not install the smart light string in a position where you can step on it. Not be allowed for children to play smart string lights,should installed out of reach of children.
-
ETL recommends testing GFCI circuits and outlets monthly to ensure proper operation.
-
Regularly check the smart string lights for physical damage or other damage caused by outdoor exposure to components, and replace any damaged smart string lights components in time.
RISK OF FIRES
- Smart String Lights are designed to be mounted with their individual keyhole mounting feature.
- Do not mount Smart String Lights by using the main electrical cord or the individual drop cords.
- Smart String Lights are designed to have limited link ability by using their electrical plugs and receptacles.
- Do not mount Smart String Lights in any position where the bulb is facing up.
- Do not allow the LED lamp assemblies to be in contact with combustible materials.
- LED lamp assemblies should hang freely and not be susceptible to repetitive damage caused by environmental conditions such as wind, rain, Not intended for installation in ceilings, soffits, cabinets, attics, or other enclosed spaces.
CAUTION
Suitable for outdoor/indoor.
- DO NOT IMMERSE IN WATER.
- DO NOT EXCEED RATED CAPACITY
VIDEO
Need a more detailed guide?
Please visit the QR code for Installation Video
If the QR code is broken, please contact us for the video.
Installation Steps
Steps 1: Initial Setup
- Carefully unpack Smart String Lights from the package.
- Before installing, plug the Smart String Lights into an outlet to ensure all lights work properly.
- Before hanging up, please test to confirm the Smart string lights can be connected to the Joinin Home APP.
IMPORTANT: Please Unplug the Smart String Lights prior to mounting.
Steps 2: Download App
Download the Joinin Home APP from App Store or Google Play.
https://a.smart321.com/xqqxxx
Scan the QR code to download
Steps 3: Register
- Enter your mobile phone number or email address.
- Enter the verification code and create a password.
- Create a password and Log in the APP.
- Please enable the Joinin Home APP to get your Bluetooth while using the App.
Steps 4: Plug – In
Plug Addlon Smart String Lights into any standard outlet.
– Turn On / Turn Off
– Transfer dynamic mode sequentially.
– Press it last 55, when the string light flash red, use the APP search and
connect.
Notes:
- After power on, the light bulbs will automatically enter the connecting state (fast blinking);
- If there is no connection after 3 minutes, the indicator lights will remain on. If you want to add a device at this time, you need to press and hold the WIFI Button on the controller for about 9 to 11 seconds until the lights blink rapidly.
Steps 5: Add Device — AUTO Mode
-
Select “Add Device” or click the “+” in the upper right corner.
-
The devices in the connecting state will be displayed at the bottom of the page.
Click the device you want ti add and please make sure that the network you connected is 2.4GHz. -
Fill in your 2.4GHz network name and password, then click “confirm”.
-
The product starts to connect until it displays 100% complete.Please keep the router, mobile phone, and product as close as possible to ensure a good reception signal.
-
After you edit the product name and save it. Click “DONE” at the top right.
Congratulation! Now you can use Joinin Home APP to control your string lights.
White Mode
Brightness
Slide the “Brightness” bar to adjust the brightness of the string lights, then
you can freely brighten or dim the lights.
Scenes
Joinin Home APP has a scene selection function.
Press the scene button to enter the scene selection interface. You can choose
your favorite scenes from 9 default scenes.
Pick 2
Hold the “Edit” to activate the customized color scene.
Pick two colors and customize their brightness and saturation as you like.
Timer
Define whether the set time is the beginning or the end of the work
Schedule
Select the time to repeat the setting within a week.
Remote control description
— Normally light up
— 2 ways of slowly flashing
— 7 ways of quickly flashing
— Timing
— Switch
–
In Breath or lash on mode, can adjust flashing speed; In lighting mode, can
adjust brightness.
In Breath or lash on mode,can adjust flashing speed;
In lighting mode, can adjustbrightness.
Remote control distance: 20-50m (without any obstructions)
Locking and unlocking
Locking: Within 3 seconds when turn on, press the “Breath” button until the
bulbs flash twice quickly.
Unlocking: Within 3 seconds when turn on, Press the “Lighting” button until
the bulbs flash twice quickly.
TROUBLESHOOTING WAYS
Cannot connect to your wi-fi network.
- Please make sure your Wi-Fi router is under the 2.4GHz setting and the entered router password is correct.
- If Wi-Fi signal is too weak, reset your Wi-Fi router and try again
- Please enable the Joinin Home App to get your local location and Bluetooth.
Setup is not working properly.
- Clean all apps that are running in the background then reopen tne Joinin Home App;
- Uninstall and reinstall the Joinin Home App then repeat the setup process.
The string lights are not responding to Joinin Home App.
- Delete the original connection record in-app and repeat the connection process.
- Check if the string lights are turned off. If yes, turn them on and wait until lights reconnect with the Wi-Fi network automatically
- Check f there are problerms with your internet connection.if necessary, resst your Wi-Fi router and try again.
**Home network is 5GHz
** The wall penetration capability of 5.0GHz is weaker than 2.4GHz which means
that the outdoor signal of 5.0GHz is worse 2.4GHz. Therefore, most smart
devices support 2.4GHz networks or dual-frequency networks of 2.4GHz and
5.0GHz.
- If you are using a dual-band router (2.4GHz and 5GHz frequency share a Wi-Fi account.), you can connect the device using the AP mode.
- Or you can log in to the management page of your router and change the SSID of the 2.4GHz and 5GHz networks to differentiate them.
PRODUCT PARAMETERS
PRODUCT INFORMATION
Input Volts | 100-240V AC. |
---|---|
Output Volts | 24V DC |
Bulb Type | S14 |
Color Temperature | 2700K |
SPECIFICATIONS
Memory Function | Yes |
---|---|
Dimmable | Yes |
Waterproof | IP65 |
Work with Alexa | Yes |
Work with Google Voice Assistant | Yes |
CUSTOMER SERVICE
30-Day Return Policy
If you’re not completely satisfied with your purchase, simply return the
merchandise via Amazon Orders.
Unused merchandise can be refunded or exchanged within 30 days from the
original purchase date.
3-Year Warranty
We guarantee your product is free from defects in product material and
workmanship for three (3) years starting from the date of purchase during
normal use of household conditions. If your appliance fails to operate
properly within our warranty period, we will arrange a new replacement free of
charge and cover all the shipping costs.
Quick Response within 12 Hours
If you are still unable to resolve the issue you are experiencing, please
contact us immediately at our support email. It doesn’t matter if the product
has been installed, our customer support team will respond within 12 hours and
assist you quickly and efficiently. The most efficient way to confirm your
proglem to us is to attach a video illustrating your product issue.
CONTACT US
- Log into your Amazon.com account, click “Returns&Orders” on the top-right corner.
- Find your order in the list and click “View order details”.
- Click the “store name” following the Sold by, below the product title.
- Click the yellow button “Ask a question”, on the top-right corner, to contact the seller.
Should you experience any issues while operating any of our products, you can
directly reach out to our Customer Support via Amazon Orders. Or you can send
your inquiry to our Official Customer Support at:
Callus:
+1(626)328-6250
Monday – Friday from 9:00AM – 5:00PM (PT)
Contact via Email:
support@addlonlighting.com
Should you experience any issues while operating any of our products, you can directly reach out to our Customer Support via Amazon Orders or you can send your inquiry to our Official Customer Support at:
support@addlonlighting.com
+1(626)328-6250
Monday – Friday from 9:00AM – 5:00PM (PT)
MADE IN CHINA
Documents / Resources
|
Addlon B0B8MYD7KG 48FT Smart Outdoor String
Lights
[pdf] User Manual
B0CC1L376C, B0B8MYD7KG, B0B8N29PR5, B0B8MYP39K, B0B8MXWWZT, B0B8MWSVZT,
B0B8N2HS3D, B0B8MYD7KG 48FT Smart Outdoor String Lights, B0B8MYD7KG, 48FT
Smart Outdoor String Lights, Smart Outdoor String Lights, Outdoor String
Lights, String Lights, Lights
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>