tapo P306 Smart Wi-Fi Outlet Extender User Guide
- June 15, 2024
- tapo
Table of Contents
tapo P306 Smart Wi-Fi Outlet Extender
About This Guide
This guide provides a brief introduction to the Smart Wi-Fi Outlet Extender and the Tapo app, as well as regulatory information. Please note that features available in Tapo may vary by model and software version. Tapo availability may also vary by region. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Tapo experience.
Conventions
In this guide, the following convention is used:
Convention | Description |
---|---|
Blue | Key information appears in blue, including management page text such as |
menus, items, buttons and so on.
Underline| Hyperlinks are in blue and underlined. You can click to
redirect to a website.
Note:| Ignoring this type of note might result in a malfunction or damage to
the device.
More Info
- Specifications can be found on the product page at https://www.tapo.com.
- Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/.
Introduction
The smart Wi-Fi outlet extender is designed to integrate your outlets in one, plus control your lighting and appliances from anywhere.
- 9-in-1 Outlet Extender – Features 3× individual smart outlets, 3× always-on outlets, and 3× USB ports. Perfect for any area with limited outlets.
- Fast Charging USB Ports – 1× USB-C port (PD) and 2× USB-A ports (QC3.0) each deliver up to 18 W of power. Charge your iPhone to 50% in just half an hour.§
- Dual Antennas – Experience a more reliable connection and superior anti-interference capabilities with dual antennas.
- App & Voice Control – Control 3× AC outlets (individually) and 3× USB ports (together) through the Tapo app, Apple Home app, or compatible voice assistants.
- Smart Night Light – The built-in light sensor senses the low ambient lighting and activates a night light for you. You can also adjust brightness and set schedules via the Tapo app or voice assistant.
- HomeKit Supported – Control your plugged-in appliances using the Apple Home app and Siri on your iPhone, iPad, Apple Watch, HomePod, or Mac.
- Remote Control – Use the Tapo app to control the smart outlet extender at any time from anywhere.
- Surge Protection and More – Built-in surge protection, overheat protection, and a UL94-V0 flame-retardant shell help keep your home safe.
- Wide Space – Effortlessly connect and power multiple devices all at once.
- Firmly Mounted – Secure the extender to wall outlets using the included widgets without worrying about wobbling when unplugging devices. Its stablizing post is adjustable to fit any wall outlet.
Appearance
System LED Status
LED Status | Event |
---|---|
Solid white | Starting up; Connected to Cloud. |
Blinking white and orange slowly
| Ready for setup; Resetting Wi-Fi.
Solid orange| Connected to Wi-Fi.
Blinking orange slowly| Disconnected from Wi-Fi.
Blinking white slowly| Firmware updating.
Blinking white and orange quickly| Restoring to factory default settings.
Set Up Your Smart Device via Tapo
Follow the steps below to get started with your new smart plug, or you can follow the setup video at https://www.tp-link.com/support/setup-video/.
Step 1. Download Tapo App
Get the Tapo app from the App Store or Google Play, or by scanning the QR code
below.
Step 2. Log In
Open the app, and log in with your TP-Link ID. If you don’t have an account,
create one first.
Step 3. Add Your Plug
Tap the button in the Tapo app, choose Plugs under the Tapo brand, and select
your model. Follow the instructions in the Tapo app to complete the
setup.
Before You Start
- Your iPhone/iPad should be connected to a stable 2.4 GHz Wi-Fi network with internet access.
- Ensure your iPhone/iPad, HomeKit device, and Apple home hub* (if any) are connected to the same Wi-Fi network.
- The hub like HomePod, HomePod mini, and Apple TV helps control your HomeKit devices remotely, share the devices with others, and automate your devices to do tasks for you.
- To control the HomeKit-enabled device in the Apple Home app, the latest iOS or iPadOS version is highly recommended.
- Find the HomeKit QR code or numeric code on your device or in its packaging. After setup, you can save the code in Device Settings in the Tapo app.
How to Set Up
- Factory reset your Tapo device.
- Open the Apple Home app. If you have added your smart device to the Tapo app, you can go to Device Settings > Device Info in the app to find the HomeKit setup code and add the device to the Home app.
- Scan the HomeKit QR code or enter the provided numeric setup code.
- Follow the instructions in the app to complete setup.
Failed to Set Up?
- Factory reset the smart device and restart your phone. Then try again.
- Move your iPhone/iPad and the smart device closer to the router to get a stronger Wi-Fi signal.
- HomeKit setup will be disabled in 10 minutes since the smart device is powered on. You can power off your smart device, then power it on and try again.
- Creating a new home in the Home app can greatly help set up your smart device.
- You can visit https://www.tp-link.com/support/faq/3390/ or scan the QR code below for more troubleshooting instructions.
Contact us at https://www.tapo.com/support for Technical Support, FAQs & more
Authtication
FCC compliance information statement
- Product Name: Smart Wi-Fi Outlet Extender
- Model Number: Tapo P306
Responsible party: TP-Link USA Corporation
- Address: 10 Mauchly, Irvine, CA 92618
- Website: http://www.tp-link.com/us/
- Tel: +1 626 333 0234
- Fax: +1 909 527 6804
- E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located
or operating in conjunction with any other antenna or transmitter. “To comply
with FCC RF exposure compliance requirements, this grant is applicable to only
Mobile Configurations. The antennas used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter.” We, TP-Link USA Corporation, has determined that the
equipment shown as above has been shown to comply with the applicable
technical standards, FCC part 15. There is no unauthorized change is made in
the equipment and the equipment is properly maintained and operated.
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Industry Canada Statement CAN ICES-3 (B)/NMB-3(B)
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device.
- Do not use the device where wireless devices are not allowed.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- Devices of the same or another type not be stacked in normal use.
- To reduce the risk of electric shock – Use only indoors.
- The devices are not intended for use in locations where the temperature may be less than actual room conditions, such as unheated warehouses or garages.
- Do not overload power outlets. This can result in the risk of fire or electric shock.
- Completely insert the product into the power outlet. Failure to do so may cause electric shock and / or excessive heat resulting in fire.
- Unplug from the power outlet if it emits smoke, has an abnormal smell or makes an unusual noise.
- Do not use the product if the casing has been broken. Danger of electric shock.
- Never touch the product with wet hands.
- Do not use this product at a refueling point.
- Observe restrictions on using wireless products in fuel depots, chemical plants or when blasting operations are in progress.
- Never put metal objects inside the product. If a metal object enters the product turn off the circuit breaker and contact an authorized electrician.
- Be careful to connect the following
- cooking appliances, irons, other devices that generate a large amount of heat. There is a risk of fire, burns or injury.
- power tools, electric machinery, or other devices that could cause injury and therefore must be used under direct careful observation.
- heating or cooling devices or any type of device which could cause health risks particularly to the elderly or children.
- keine Steckergeräte einstecken.
- Nicht hintereinander stecken.
CAUTION
Electrical switch integrated in this product is only intended for functional
purposes. Unplug the appliance before servicing.
Supported load types
Heater: ≤1500 W Humidifier: ≤260 W Toaster: ≤850 W Tower Fan: ≤50 W Iron:
≤1500 W
- Operating Temperature: 0 ºC~ 40 ºC (32°F ~ 104°F )
- Storage Temperature: -40 ºC~ 70 ºC (-40°F ~ 158°F )
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Explanation of the symbols on the product label
References
- Link: Simple, secure one-click payments
- WiFi Networking Equipment for Home & Business | TP-Link
- Tapo | Smart Devices for Smart Living
- Support | Tapo
- How to Troubleshoot when a TP-Link HomeKit-enabled device fails to add to Apple’s Home App
- Support Videos | TP-Link
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>