gridinlux 139131811 Homely Wi-Fi Warm Thermal Emitter User Manual

: June 15, 2024
: gridinlux

Table of Contents

gridinlux 139131811 Homely Wi-Fi Warm Thermal Emitter
SAFETY INSTRUCTIONS
PARTS OF THE DEVICE
PRODUCT ASSEMBLY
HOMELY WI Fl-WARM SERIES
OPERATION
APP DOWNLOAD AND REGISTRATION
CLEANING AND MAINTENANCE
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

gridinlux 139131811 Homely Wi-Fi Warm Thermal Emitter

Dear client,

We would like to thank you for the trust you have placed in our brand, choosing us as a sure guarantee to improve your quality of life.
At Gridinlux we are constantly working to design new products that help to make your day-to-day life easier.
We invest an enormous effort into research and development, being able to produce, thanks to the latest technology, efficient systems that are based on the thing that we value the most: people.
From today, we will be with you to help you in every way you need. This is our promise to you.

Remember:

The photos of the product in the manual and on the box correspond to the most recent model and only serve as a reference.
This manual contains recommendations for use.

Antonio Castellano European Product Manager

Correct disposal of this product

This symbol indicates that, within the EU, this product should not be disposed of along with other household waste.
To prevent potential damage to the environment or human health from the uncontrolled elimination of waste, please recycle it responsibly to promote the sustainable reuse of its material resources.

SAFETY INSTRUCTIONS

First of all, you must make sure that the mains voltage in which you are going to connect this device, matches the voltage specified on the product label. You should also make sure that the plug is grounded.
This product is designed for domestic use only. Do not use it for industrial or commercial purposes. It is also designed exclusively for indoor use, so you should not use it outdoors.
If the device, charger, cable or any element that makes it up suffers any kind of damage or is in poor condition, please do not use or manipulate it on your own. Contact the specialized technical service so that they can help you.
To avoid the risk of overheating, do not cover the device during use.
When installing this device on the wall of a bathroom, you must ensure that it is located in a place where it will not be easily exposed to water from the shower or tap.
Do not place the device directly on the ground without first installing the corresponding feet on its base.
Do not place the device near strong sources of heat, flammable substances and/ or objects (curtains, carpets, furniture … ) or wet surfaces.
Do not place the product directly below an electrical outlet.
When turning it on for the first time, it is recommended to place it in a ventilated area of your house, set at maximum temperature for 2 or 3 hours, for efficient tuning.
The surface of the product can become very hot during operation. Avoid contact between the skin and the device
Always use with items in an upright position.
The appliance must not be used by children. The unsupervised use of people with reduced physical, sensory or mental capacities is also not recommended.
It is recommended that children do not play near the device. To prevent children from manipulating the device, it has a special locking system.
It is normal for noises to be produced inside during use, due to the change in temperature and the contrasts that the appliance will experience.

PARTS OF THE DEVICE

PRODUCT ASSEMBLY

FLOOR ASSEMBLY

Place the legs on the bottom of the device, each at one end, and screw them with the screws A. Make sure they are properly fixed.

WALL ASSEMBLY

The installation of this product must be carried out under current electrical legislation, complying with the recommendations and regulations for correct use and total efficiency that avoid any type of problems arising from a bad application.
Before installing it, make sure the appliance is placed at a minimum safety distance of 20 cm from any obstacle (walls, shelves, floor … ) and 50cm from the ceiling.

HOMELY WI Fl-WARM SERIES

Uninstall the brackets from the product’s body.
Drill 2 holes in the wall where the product is going to be installed. The hole diameter must match the screw B diameter. Fix the bracket to the wall using the screws B.
Fix the appliance to the wall bracket making sure the holes are aligned with the bracket.
Tighten the screws from the bracket to the appliance to fix it securely.

OPERATION

ON/OFF

Press the power switch.
Press the (POWER) button to start the device up and enter function settings. The upper part of the display will show the room temperature.
The heater will start operating at low power.

POWER

It has 2 different powers that you can adjust by pressing the POWER button. On the screen, you will see how the Power 1 and Power 2 icon changes lighting.

TEMPERATURE

Press the”+” or”-” button to select the desired temperature from 5°- 40°C. The temperature indicator will remain lit while it is being set.

TIMER

Press the (TIME) button to set the time you desire the appliance to operate. It can be programmed from 1 to 24 hours.
Through the APP, you can schedule working hours every day of the week to 100% customize your performance. More information in the APP section.

LOCKMODE

Press the (LOCK) button for 3 seconds. The display will show the close lock icon.
Press the (LOCK) button again for 3 seconds to deactivate the lock mode.

APP DOWNLOAD AND REGISTRATION

With the APP, you will have total and absolute control of all the activity of this smart device. To configure your WIFI WARM device and get the most out of it, see the complete updated installation and configuration guide at:
https://gridinlux.es/hogar/climatizacion/app-wifi-warm
Or scan the following QR code from your mobile to access directly:

CLEANING AND MAINTENANCE

Always turn off, unplug, and allow the appliance to cool down before cleaning.
Do not use abrasive scouring pads, powders, or cleaners to clean the product.
Use a soft, dampened, and clean cloth to clean the product’s outer housing.
Clean periodically the air inlet and outlet.

WARRANTY AND OFFICIAL TECHNICAL SERVICE

This product is guaranteed for 3 years from the date of purchase, as long as the purchase invoice is well kept and sent to us when needed, the product is in perfect physical condition and is given proper use in accordance with the guidance in this instruction manual.

The warranty will not cover:

If the product has been used beyond its capacity or usefulness, mistreated, beaten, exposed to humidity, submerged in any liquid or corrosive substance, as well as any other fault attributable to the consumer.
If the product has been disassembled, modified, or repaired by persons not authorized by the official GridinluxTechnical Service.
If the incident has been caused by normal wear and tear of the parts due to its use over time.
The warranty service covers all manufacturing defects for 3 years based on current legislation, except consumable parts. In case of misuse by the user, the warranty service will not be responsible for the repair. If on any occasion you detect an incident with the product or have any questions, contact the Official GridinluxTechnical Assistance Service through the email address: teayudamos@gridinlux.es

Information required for the electric local space heaters

output

| max| N/A| kW| Type of heat output/room temperature control (select one)
At minimum heat

output

| Elgin| N/A| kW| single-stage heat output and no room temperature

control

control

|
| | | | with mechanic thermostat room temperature

control

|
| | | | with electronic room temperature control|
| | | | electronic room temperature control plus a day timer|
| | | | electronic room temperature control plus a weekly timer|
| | | | room temperature control, with presence detection
| | | | room temperature control, with presence detection|
| | | | room temperature control, with an open window detection|
| | | | with a distance control option|
| | | | with adaptive start control|
| | | | with working time limitation|
| | | | with a black bulb sensor|
GRIDINLUX S.L.U. I gridinlux.es I CIF: B86889458 I IMPORTER: B85960425

Gridinlux S.L.U. | CIF: 886889458 |IMPORTADOR: B85960425gridinlux.es
Avenida La Ballestera s/n, parcela C4, 19208 Alovera, Guadalajara, España

Documents / Resources

| gridinlux 139131811 Homely Wi-Fi Warm Thermal Emitter [pdf] User Manual
139131811 Homely Wi-Fi Warm Thermal Emitter, 139131811, Homely Wi-Fi Warm Thermal Emitter, Wi-Fi Warm Thermal Emitter, Warm Thermal Emitter, Thermal Emitter, Emitter
---|---