Dainolite ECO-C512-MW Echo 1-Light LED Flush Mount Light Installation Guide

: June 9, 2024
: Dainolite

Table of Contents

Dainolite ECO-C512-MW Echo 1-Light LED Flush Mount Light
WHAT IN THE BOX
DIMENSION
INSTALLATION Product Information
Product Usage Instructions
IMPORTANT SAFETY INSTRUCTIONS
For Warranty
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Dainolite ECO-C512-MW Echo 1-Light LED Flush Mount Light

WHAT IN THE BOX

DIMENSION

1x 12W AC LED 3000K 960Lumens Included/inclus
Input: 120V Dimmable

INSTALLATION Product Information

The ECO-C512 is a lamp with a 12W AC LED bulb that has a color temperature of 3000K and provides 960 lumens of brightness. It is compatible with dimmers such as LUTRON DVELV-300P, LUTRON MAELV-600, and LEGRAND ADTH700RMTU, which are listed on the next page. The lamp comes with an optional distance ring for use and has a green ground wire. It is designed for use with a 120V input and is dimmable. The LED bulb is permanently installed in the lamp, and it does not need to be replaced.

Product Usage Instructions

To use the ECO-C512 lamp, first, ensure that it is installed according to the applicable installation code by someone familiar with the construction and operation of the product and the hazards involved.

When using the lamp, avoid touching the LED bulb as it generates some heat. Do not try to modify the plug, cable, adaptor, or LED bulb. Use a soft cloth when cleaning the lamp, and do not use chemical or abrasive cleaners.

If you encounter any issues with the product, do not return it to the retailer. Instead, contact the factory directly in writing by emailing dainolite@dainolite.ca. Include a copy of your purchase invoice and describe the defect. A factory representative will contact you to advise what further action will be taken.

If any hardware is missing or glass is broken, contact the factory directly in writing by emailing dainolite@dainolite.ca. The missing or broken parts will be shipped to you directly on the same day after receipt of your email (weekend excluded).

To dim the lamp, use dimmer models such as LUTRON DVELV-300P, LUTRON MAELV-600, or LEGRAND ADTH700RMTU. Using any other dimmer will void the product’s warranty.

Warning/Attention
This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.

IMPORTANT SAFETY INSTRUCTIONS

The LED bulb has been permanently installed into this lamp. The LED bulb does not need to be replaced. Do no atiempt to remove or replace the LED bulb.
Although LED bulbs do not get as hot as traditional light bulbs, they still generate some heat. Avoid touching the LED bulb. Do not try to modify the plug, cable, adaptor or LED bulb. Use a soft cloth when cleaning the lamp.
Do not use chemical or abrasive cleaners
These important safety warnings do not cover all possible conditions or situations that may occur. Please take care when using this product.

Do Not Return Product To The Retailer

For Warranty

Contact the factory directly in writing: Email dainolite@dainolite.ca . Include a copy of your purchase invoice and describe the defect. A factory person will contact you directly to advise what further action will be taken.

For Missing Hardware or Broken Glass:
Contact the factory directly in writing: Email dainolite@dainolite.ca . The missing or broken parts will be shipped to you directly the same day acter receipt of your email (weekend excluded).

DIMM ER / CHANGER L’INTENSITE