Blackstar Amplification FLY 3 Acoustic Stereo Pack Amplifier User Guide

Blackstar Amplification FLY 3 Acoustic Stereo Pack Amplifier

Product Information

Specifications

• Type: Mini amplifier
• Model: Blackstar FLY Acoustic
• EQ Shapes: Two preset acoustic EQ shapes
• Effects: Built-in ECHO with adjustable volume and tempo
• Power Source: 6 x AA batteries or Blackstar-approved power supply unit (sold separately)
• Connectivity: MP3 Line In, LINE OUT, Headphones

Product Usage Instructions

Getting Started

1. Switch your amplifier on using the Power Switch.

Setting Up

Note: The LED light will fade as the batteries lose power.

2. Adjust the ECHO LEVEL dial to change the volume of the delay effect.
3. Adjust the ECHO TIME dial to change the tempo of the delay effect.
4. Press the SHAPE switch to choose between two EQ shapes. The ‘Out’ position provides a flat EQ response, while the ‘In’ position offers a mid-cut with a low and high boost for an alternative sound.

Get Connected

Connect your FLY 3 Acoustic to various devices using the following options:

• Desktop or Laptop computer
• Tablet
• Phone
• MP3 Line In & LINE OUT for connecting to a PA system
• Headphones
• FLY 3 Acoustic front panel for connecting to FLY 103 Acoustic (see ‘MAKE YOUR SET-UP STEREO’)

Battery Information

• We recommend using rechargeable (NiMH) or Alkaline batteries in your FLY 3 Acoustic for optimal performance while on the go. The amplifier requires 6 x AA batteries (not included).

Power Supply

• When using the FLY 3 Acoustic indoors, it is advised to use the Blackstar-approved power supply unit (FLY PSU) to power the amplifier. The power supply is sold separately.

Connect to FLY 103

• If you want to enhance your sound experience, you can connect your FLY 3 Acoustic to the FLY 103 Acoustic speaker cabinet (sold separately).

Download User Handbook

• For more detailed information, you can download the full user handbook for the FLY 3 Acoustic from the official Blackstar Amps website: www.blackstaramps.com

FAQ

Q: What batteries should I use for the FLY 3 Acoustic?

• A : We recommend using rechargeable (NiMH) or Alkaline batteries for optimal performance.

Q: Can I connect my FLY 3 Acoustic to a PA system?

• A : Yes, you can connect your FLY 3 Acoustic to a PA system using the MP3 Line In & LINE OUT ports.

Q: Can I use a power supply other than the Blackstar-approved one?

• A : No, it is important to use the Blackstar-approved power supply unit (FLY PSU) to ensure proper functionality and safety.

SET-UP GUIDE

• Congratulations on buying this Blackstar FLY Acoustic mini amplifier
• Your FLY 3 Acoustic is a compact mini amp with a big TONE. Combining two preset acoustic EQ shapes and a built-in ECHO. It’s the perfect take-anywhere acoustic amp.

GETTING STARTED

• input
  • Plug your instrument lead into the Input socket.

SETTING UP

1. CHOOSE YOUR SOUND
   • Set your Volume, Bass and Treble using each control knob.
2. CHOOSE YOUR ShApe
   • Press this switch to choose between two EQ shapes. ‘Out’ position; a flat EQ response. ‘In’ position; a mid-cut with a low and high boost for an alternative sound.
3. ECHO LEVEL
   • The ECHO LEVEL dial changes the volume of the delay effect.
4. ECHO TIME
   • The ECHO TIME dial changes the tempo of the delay effect.

GET CONNECTED

MP3 Line In & LINE OUT

• Play audio from your phone, MP3 player, tablet or laptop through the FLY 3 Acoustic using an AUX cable (sold separately) – you can also use a 3.5mm cable to connect the line out to a PA for live performances or recording.

BATTERY INFORMATION

BATTERIES

• We recommend using rechargeable (NiMH) or Alkaline batteries in your FLY 3 Acoustic to get the most out of using it on the go.

NOT ON THE FLY?

WARNING!

• Only use a Blackstar approved power supply unit.

FLY PSU

• Use the Blackstar approved power supply to power your FLY 3 Acoustic when you’re staying inside.

MAKE YOUR SET-UP STEREO

CONNECT TO FLY 103

• Connect the optional FLY 103 Acoustic for 6W a stereo set-up.

Warning! Important safety information

READ THE FOLLOWING INFORMATION CAREFULLY. SAVE ALL INSTRUCTIONS FOR FUTURE REFERENCE!

• Follow all warnings and instructions marked on the product!
• Do not open the equipment case. There are no user serviceable parts in this equipment. Refer all servicing to qualified service personnel.
• Clean only with a dry cloth.
• Condensation can form on the inside of an amplifier if it is moved from a cold environment to a warmer location. Before switching the unit on, it is recommended that the unit be allowed to reach room temperature.
• Unauthorised modification of this equipment is expressly forbidden by Blackstar Amplification Ltd.
• Never push objects of any kind into ventilation slots on the equipment casing.
• Do not expose this apparatus to rain, liquids or moisture of any type.
• Do not place this product on an unstable trolley, stand or table. The product may fall, causing serious damage to the product or to persons!

Do not cover or block ventilation slots or openings.

• This product should not be placed near a source of heat such as a stove, radiator, or another heat producing amplifier.
• Use only an approved Blackstar power supply and mains cable (Blackstar PSU-1). Unplug the Blackstar power supply and mains cable from the mains supply when not in use.
• Batteries shall not be exposed to excessive heat such as sunshine, fire or similar. They must be disposed of according to local environmental guidelines.
• If the product does not operate normally when the operating instructions are followed, then refer the product to a qualified service engineer.
• The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the following permissible noise level exposures:

Duration Per Day In Hours/Sound Level dBA, Slow Response

• 8 90
• 6 92
• 4 95
• 3 97
• 2 100
• 1½ 102
• 1 105
• ½ 110
• ¼ or less 115
• According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss.
• Ear plug protectors in the ear canals or over the ears must be worn when operating this amplification system in order to prevent a permanent hearing loss if exposure is in excess of the limits as set forth above. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation.
• All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
   • Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE”.
• WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS”.
• This symbol is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance.
• This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
• CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
• AVIS: NEPAS DEHOG ELECTRIQUE

DOWNLOAD YOUR FLY 3 ACOUSTIC HANDBOOK

• For more information, or to download the full user handbook go to: www.blackstaramps.com

Documents / Resources

| Blackstar Amplification FLY 3 Acoustic Stereo Pack Amplifier [pdf] User Guide
FLY 3 Acoustic Stereo Pack Amplifier, FLY 3 Acoustic, Stereo Pack Amplifier, Pack Amplifier, Amplifier
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>