inakustik 009241020 HDMI Cable for Bluray Instructions
- June 15, 2024
- inakustik
Table of Contents
inakustik 009241020 HDMI Cable for Bluray
Product Information
The Profi HDMI 2.0 LWL Cable is an active cable with integrated electronics and is therefore direction-specific. It supports data rates of up to 24 Gbps on a transmission path of up to 100 m, making it suitable for high-resolution 4K formats with 50 or 60 Hz. This cable is designed for connecting devices with an HDMI 2.0 interface over long distances.
Features:
- Supports HDMI 2.0 interface
- Active cable with integrated electronics
- Supports high-resolution 4K formats with 50 or 60 Hz
- Data rates of up to 24 Gbps
- Transmission distance of up to 100 m
Safety Instructions:
Please read, follow, and adhere to the following safety instructions:
- Keep the operation manual for future reference.
- Pay attention to all warning signs on the components and in the manual.
Specifications:
- Manufacturer: in-akustik GmbH & Co. KG
- Model: Profi HDMI 2.0 LWL Cable
- Part Numbers: 009241020 | 009241030 | 009241050 | 009241070 | 009241100
- EAN Code: 4001985514595 | 4001985514601 | 4001985514618 | 4001985514625 | 4001985514632
Product Usage Instructions
Installation:
Follow these steps to install the Profi HDMI 2.0 LWL Cable:
- Identify the direction mark on the plug of the cable.
- Ensure that the direction mark is correctly aligned during installation.
- Connect one end of the cable to the HDMI output port of the source device.
- Connect the other end of the cable to the HDMI input port of the display device.
Testing Compatibility:
It is recommended to test the compatibility of all components and cables before installation, especially when using long cables. Follow these steps to test compatibility:
- Gather all planned components, including the cables.
- Connect the components in the desired configuration.
- Ensure that all components and cables function flawlessly.
Frequently Asked Questions (FAQ)
Q: Is the Profi HDMI 2.0 LWL Cable compatible with HDMI 1.4 devices?
A: Yes, the Profi HDMI 2.0 LWL Cable is backward compatible with HDMI 1.4 devices. However, it will only support HDMI 1.4 features and specifications.
Q: Can I use the Profi HDMI 2.0 LWL Cable in both directions?
A: No, the Profi HDMI 2.0 LWL Cable is direction-specific and will only work in one direction. Please ensure that you align the direction mark on the plug correctly during installation.
Q: What is the maximum transmission distance supported by the Profi HDMI 2.0 LWL Cable?
A: The Profi HDMI 2.0 LWL Cable can transmit signals up to a distance of 100 m.
DESCRIPTION
Thank you for using this product. HDMI cable with professional fibre optic technology. This technology facilitates data rates of up to 24 Gbps on a transmission path of up to 100 m. It therefore supports high-resolution 4K formats with 50 or 60 Hz and is the solution for connecting devices with an HDMI 2.0 interface over great distances.
IMPORTANT REMARK
The Profi HDMI 2.0 Cable is an active cable with electronic components build in and works just in one direction. For this reason you MUST take care to mark of the direction on the plug during installation. The cable does NOT work in reverse direction!
SCOPE OF DELIVERY
- 1Professional HDMI 2.0 optical fibre cable
- 1 x Operation Manual
FEATURES
- Supports HDMI2.0
- Supports HDCP 2.2
- Supports UHD4K@50/60Hz
- Supports HDR
- Supports HD Audio
- Supports EDID
- 24k gold-plated metal plugs
- RoHS compliant
- REACH compliant
TECHNICAL DATA:
- Data rate: 24 Gbps max.
- Powered by the HDMI port (no additional power supply necessary)
- Signal direction marked
- Highly flexible, easy to install
- Cable Diameter: 4,0 mm
- Plug Dimension: 21 x 11.5 x 48mm (B x H x L)
- Bending radius: 15mm min.
IMPORTANT NOTE:
Experience has shown that compatibility problems have occurred time and time
again when installing HDMI components. The cause of these problems is often
difficult to identify, as the individual components and cables usually
function flawlessly, in turn, in other configurations. We therefore strongly
recommend testing the entire signal chain using all planned components,
including the cables, before installing them. This in particular when long
cables are used and need to be installed.
When installing the cables, also pay attention to whether a running direction
must be observed. Long HDMI cables such as the Excellence HDMI2.0 cable with a
length of 7.5 m or more, or the Profi HDMI2.0 fibre optic cable, feature
active chips and therefore have a fixed running direction.
Cables are sensitive! They must not be bent, squeezed or pulled, as otherwise
they might be damaged.
SAFETY INSTRUCTIONS
- General: Read, observe and adhere to the following safety instructions. Please keep the operating manual. Observe all the warning notices on the components and in the operating manual.
- Proper use: The components are solely designed for operation indoors. Connect them as specified in the operating instructions. Only use accessories that have been recommended by the manufacturer.
- Humidity: Select an installation location for the components which does not have a high level of relative humidity and is free of moisture. Never use the components near water. Moisture can bypass the electrical insulation and pose a lethal danger, as it can for all products not specially designed to be water-resistant. The components may not be exposed to dripping or sprayed water.
- Product protectio: Do not under any circumstances expose the components to high levels of humidity. Extreme temperature fluctuations, humidity and extended exposure to light can damage the components and alter their appearance. Make sure that no foreign objects or liquids enter the components.
- Positioning: Do not position the components near sources of heat, heaters, heating valves, ovens or other heat-producing devices. The components may only be stored and operated in the temperature range stated. The components heat up during operation.
- Connection: The components must only be connected to the specified rated voltage! All cables must be positioned in such a way that there is no danger of them being damaged (e.g. being stepped on, placed under furniture etc.). Never remove cables by pulling the cable; instead, always hold the plug when disconnecting. In stand-by mode, the components are not completely disconnected from the mains supply. To avoid any unnecessary hazards or energy consumption during longer absences, the components should be disconnected from the mains supply.
- Maintenance: Maintenance on the product may only be performed by persons qualified to do so. Maintenance is necessary in all cases of damage, i.e. in the case of damaged cables and plugs, as well as after liquid spills or objects falling on the components, components falling down, foreign bodies entering the components, exposure of components to rain or humidity, or other influences impairing the functioning of the components.
- Looking after the product: Disconnect the components from the power supply before cleaning them Always clean the components with a soft, dry and lint-free cloth, or with a brush. Do not under any circumstances use scouring powder, alcohol, benzine, furniture polish or similar substances.
DISPOSAL:
According to WEEE, directive 2012/19/EU old or defective devices that are labeled with a crossed-out rubbish bin may not be disposed of with conventional household waste. They must be handed in at local recycling centers in accordance with the applicable national legislation. Proper disposal helps to conserve resources and protect the environment.
MISC
Indication without guarantee. All product images similar. We reserve the right to make changes.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, in-akustik GmbH & Co. KG declares that this item complies with directives EMC 2014/30/EU and RoHS 2011/65/EC. The full text of the EU declaration of Conformity is available at the following internet address: www .in-akustik.com
- Tel: +49 (0) 7634 5610-70
- Fax: +49 (0) 7634 5610-80
- E-Mail: info@in-akustik.com
- Web: www.in-akustik.com