nordlux D1806 Otis LED Wall Light Instruction Manual
- June 15, 2024
- nordlux
Table of Contents
nordlux D1806 Otis LED Wall Light
Mounting instruction
- Protected against solid objects with a diameter of 1.0 mm or more. Protected against contact with dangerous parts with wires, etc.
- IPX4: Raindrops falling from any angle will not affect the function/safety of the lamp.
- Class II: The lamp is double-insulated and does not need to be connected to the yellow/green earth wire.
- The lamp is only suitable for connecting directly to the mains.
- IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorized electrical contractor. Contact your local electricity authority for advice.The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- – Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product.
- The mounting instruction must not be discarded.
- For indoor use only.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>