iLED2 38W 3000K 120 Wall or Ceiling Light Instruction Manual
- June 15, 2024
- iLED2
Table of Contents
iLED2 38W 3000K 120 Wall or Ceiling Light
Specifications
- Model: HENO
- Color Temperature Options: 3.500K, 4.000K, 3.000K
- IP Rating: IP40
- Power Input: 220-240V, 50/60Hz
- Driver Type: PUSH DIM / DALI/PUSH DIM / DALI DIM / TRIAC DIM
Installation
CAUTION! Before proceeding with the installation, turn off the main power to prevent possible electric shock. The installation should only be carried out by a technician or a qualified person. If the lamp has a lampshade or diffuser, handle it carefully as it is fragile. In the case of an integrated LED light source, only a technician or a qualified person can perform the replacement. The manufacturer is not responsible for the incorrect use or assembly of the product.
Color Temperature Switch
The HENO product features a color temperature switch that allows you to
adjust the color temperature of the light emitted. The available options are:
- 3.500K
- 4.000K
- 3.000K
Driver Types
The HENO product is compatible with different driver types. Please refer to
the markings on your specific model to determine the appropriate driver type:
- PUSH DIM – For this driver type, connect the product to a power source of 220-240V, 50/60Hz. Connect the L (Line) and N (Neutral) wires accordingly.
- DALI/PUSH DIM – For this driver type, connect the product to a power source of 220-240V, 50/60Hz. Connect the L (Line) and N (Neutral) wires accordingly. Additionally, connect the DA (Digital Addressable Lighting Interface) or DA/L (Digital Addressable Lighting Interface with Leading edge dimming) wires.
- DALI DIM – For this driver type, connect the product to a power source of 220-240V, 50/60Hz. Connect the L (Line) and N (Neutral) wires accordingly. Additionally, connect the DA (Digital Addressable Lighting Interface) wires.
- TRIAC DIM – For this driver type, connect the product to a power source of 220-240V, 50/60Hz. Connect the L (Line) and N (Neutral) wires accordingly. Additionally, connect the Phase cut Triac dimmer wires. Choose either Trailing edge or Leading edge dimming based on your dimmer type.
The installation may only be carried out by a technician Nur ein Techniker kann die Installation durchführen Instalaci smí provádět pouze technik Inštaláciu môže vykonať iba technik
INSTALLATION
CAUTION: Turn off the main power before proceeding with the installation to prevent possible shock. The installation may only be carried out by a technician or a qualified person. If the lamp has a lampshade/diffuser, handle it carefully as it is fragile. With an integrated LED light source, only a technician or a qualified person can make the replacement. The manufacturer is not responsible for the incorrect use and assembly of its products.
CONNECTION
WIRING
CAUTION!
Turn off the main power before proceeding with the installation to prevent
possible shock. The installation may only be carried out by a technician or a
qualified person. If the lamp has a lampshade/diffuser, handle it carefully as
it is fragile. With an integrated LED light source, only a technician or a
qualified person can make the replacement. The manufacturer is not responsible
for the incorrect use and assembly of its products.
FAQ
- Q: What should I do before installing the product?
- A: Before installing the product, make sure to turn off the main power to prevent electric shock. Only a technician or a qualified person should perform the installation.
- Q: Can I replace the integrated LED light source myself?
- A: No, the replacement of the integrated LED light source should only be done by a technician or a qualified person.
- Q: What happens if I use or assemble the product incorrectly?
- A: The manufacturer is not responsible for any incorrect use or assembly of the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>