xiaomi AC-M6-SC Mi Air Purifier 3 User Manual
- June 4, 2024
- Xiaomi
Table of Contents
Mi Air Purifier 3 User Manual
Warning
- Turn off and unplug the purifier before moving it.
- The purifier cannot turn on when the fan grille and the filter compartment cover are not installed properly.
- Maintain a distance of at least 20 cm between the air inlets and walls or other objects.
- Frequently remove dust, hair, and other particles from the outer mesh screen of the filter, so as to reduce the chance of bacteria growth.
- Remove dust, hair, and particles from the purifier’s air inlets to prevent a reduction of air intake.
- Cover the air outlet to prevent dust, hair, and other particles from falling in when the purifier is left unused for a long time.
To avoid fire, electric shocks, or other damage, use the power cord and electrical outlet as instructed below:
- Do not excessively pull, twist or bend the power cord, as this may expose or break the cord’s core.
- The power cord must be plugged into a suitable electrical outlet.
- Use the power cord that was provided with the purifier, do not use any third-party power cords.
- Always unplug the purifier before carrying out maintenance to or moving the air purifier.
- When the power cord is damaged, it must be replaced with a genuine power cord purchased from the manufacturer or after-sales service department.
- Immediately stop using the purifier when it makes unusual sounds, gives off bad odors, overheats, or its fan rotates irregularly.
- Do not stick your fingers or foreign objects into the protective parts, movable parts, air inlets, or air outlets.
- Keep objects such as hairs or fabrics away from the purifier to avoid blocking the air inlets or air outlets.
- Do not sit on, lean on or tilt the purifier.
- When using in conjunction with gas-fueled appliances (such as gas stoves, gas heaters), please ventilate sufficiently to avoid carbon monoxide poisoning.
- Do not pour liquids, nor throw powders or other small substances into the purifier’s air outlet.
Do not use the purifier in the following circumstances, as they may result in electric shocks, fire, or other damage:
- Near open flames, such as candles, incense burners, stoves, fireplaces, cigarettes, firecrackers, lighters, multi-purpose torches, candle lighters, or fire pans.
- Near appliances that generate high temperatures, such as electric heaters, fan heaters, electric foot warmers, electric stoves, and electric irons.
- Make sure no inflammable objects get into the purifier.
- In unstable locations where the purifier can easily fall over.
- In environments that are extremely hot, humid, or damp, such as bathrooms.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
Product Overview
Read this manual carefully before use, and retain it for future reference.
Note: Illustrations of the product, accessories, and user interface in
this user manual are for reference purposes only. The actual product and
functions may vary due to product enhancements.
Display
Installation
-
Open the filter compartment
Press the buckle to open the filter compartment, and make sure the filter is installed correctly.
-
Remove the power cord package
Remove the power cord package, and close the filter compartment.
-
Connect to an outlet
How to Use
Placing the purifier in a suitable location For optimal performance, maintain
the recommended distances between the purifier, walls and other objects (refer
to the illustration above).
Note: It is recommended to keep doors and windows closed for a better
purifying effect when using the purifier.
On/Off & Mode Button
Tap to turn on the purifier, then tap to switch modes. Press and hold for two
seconds to turn off the purifier.
Display On/Off Button
Press the button on the back of the purifier to adjust the display’s
brightness, or to turn the display on/off.
Resetting Wi-Fi
When the phone cannot connect to the purifier, simultaneously press and hold
the On/Off & Mode button and the Display On/Off button for five seconds. Once
you hear a beep, the purifier’s Wi-Fi has been reset successfully.
Connect with Mi Home / Xiaomi Home App
This product works with Mi Home / Xiaomi Home app*.
Control your device with Mi Home / Xiaomi Home app.
http://home.mi.com/do/index.html?model=zhimi.airpurifier.ma4
Scan the QR code to download and install the app.
You will be directed to the connection setup page if the app is installed
already. Or search “Mi Home / Xiaomi Home” in the app Store to download and
install it.
Open Mi Home / Xiaomi Home app, tap “+” on the upper right, and then follow
the prompts to add your device.
*The app is referred to as the Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.
Note: The version of Mi Home app might have been updated, please follow
the instructions based on the current app version.
Filter Status Notifications
-
Filter Installation Notification
No filter was detected, or the installed filter is not genuine. -
Filter Service Life Notification
When the purifier detects that the filter’s service life is more than 10%, either unplug and plug in the power cord again then turn on the purifier, or open and close the filter
compartment then turn on the purifier, the filter’s remaining service life (in %) will appear on the display. -
Filter Replacement Notification
The filter replacement period is 6–12 months. If the filter’s service life is 10% or less, the display will show a QR code and the filter’s remaining service life (in %) whenever you turn on the purifier.
Note: Refer to the Filter Replacement instructions on the inside of the filter compartment cover.
Note: The filter may produce odors when it absorbs excessive harmful
gases. It is recommended to store the filter in a place with good lighting and
ventilation to improve
the activity of the activated carbon and restore its particle adsorption
capacity. Please replace the filter when its recommended service life is due.
Care & Maintenance
**** Make sure the purifier is turned off and unplugged.
Cleaning the filter compartment Use a vacuum cleaner or a soft cloth to remove
any dust from the air inlets or the filter compartment, so as to ensure
optimal ventilation and
purification.
Cleaning the laser particle sensor The latch of the particle sensor’s cover is
located just above the inside of the filter compartment. Remove the cover, by
pushing a finger up
against the latch (as shown in Illustration A). Use an air blow gun or a hair
dryer to clean the cover and the sensor (as shown in Illustration B).
Note: Do not use hot air.
Specifications
Name| Mi Air Purifier 3| Rated Voltage| 100-240 V-| Clean Air Delivery Rate
(CADR Particles)| 380 m3/h
---|---|---|---|---|---
Model| AC-M6-SC| Rated Frequency| 50/60 Hz| Formaldehyde Clean Air Delivery
Rate
(CADR Formaldehyde)| 60 m3/h
Item Dimensions| 240 . 240. 520 mm| Rated Power| 38 W| Network Standby Power
Consumption| < 2.0 W
Net Weight| Approx. 4.8 kg| Noise Level| 64 dB(A)| Wireless Connectivity| Wi-
Fi IEEE
802.11 b/g/n
2.4GHz
Effective Coverage| 279-484 Sq ft „| Particle Purification
Efficiency| High| Formaldehyde Purification Efficiency| High
Max RF Output Power| Wi-Fi 2.4G (2400 – 2483.5 MHz): 1778 dBm RFID (13.56MHz):
0 dBm
*Calculated according to standard Q/BJZMK0001-2018
Regulatory Compliance Information
Europe — EU declaration of conformity
Hereby, Beijing Smartmi Electronic Technology Co., Ltd. declares that the
radio equipment – Mi Air Purifier 3, type AC-M6-SC is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address:
http://www.mi.com/global/service/support/declaration.html
Disposal and recycling information
All products bearing this symbol are waste electrical and electronic equipment
(WEEE as in directive 2012/19/ EU) which should not be mixed with unsorted
household waste. Instead, you should protect human health and the environment
by handing over your waste equipment to a designated collection point for the
recycling of waste electrical and electronic equipment, appointed by the
government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human health.
Please contact the installer or local authorities for more information about
the location as well as terms and conditions of such collection points.
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Beijing Smartmi Electronic Technology Co., Ltd.
Address: Room 201-203, Unit 6, Building A, No. 66, Zhuang Road, Qinghe,
Haidian District, Beijing
For further information, please go to www.mi.com
Service Call: 1800 103 6286
V-190828-Y
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>