zidoo Z2600 4K UHD Media Player Instructions
- June 13, 2024
- Zidoo
Table of Contents
zidoo Z2600 4K UHD Media Player
Device Interface
Zidoo Z2600 is equipped with audio and video input & output ports and data
transmission ports. Please refer to the descriptions in this manual.
Front
Right
Back
Note:
- Please load/change the hard disk after turning off the power. If it is a brand-new hard disk, Please load it after formatting it.
- Please prevent the orifice of the cooling fan from being blocked.
- Do not touch any liquid in case the liquid runs into the inner part of the device and damage it.
- Any maintenance personnel who are not appointed are not allowed to open the case.
Load the Hard Disk
Z2600 is equipped with 3.5 inches HDD Bay and high speed SATA transmission
port. The hard disk can be loaded by pushing with hand. (The maximum hard disk
supports 14 TB)
Note : Do not load or change the hard disk while the power is on to avoid damage of the device or hard drive data. If it is a brand-new hard disk, please format it before loading it to the device. This device supports hard disk of the following formats: EXT3, EXT4, NTFS, FAT32, EXFAT.
Device Connection
-
Connect HDMI Cable to TV
Z2600 have two ways to connect HDMI. One is stand-up output mode and another one is Double output mode.Please make sure the power of the TV and media player are off. -
Stand-up Output mode:While the power of TV and Media Player is off, insert one end of HDMI cable into HDMI OUT and insert the other end into HDMI IN port.
-
Double Output mode (audio and video separate output): please shutdown both TV and Media Player, then connect one HDMI cable from HDMI OUT AUDIO ONLY port to amplifier while connect the other HDMI cable from HDMI OUT MAIN port to TV.
-
Connect with the power. This device is equipped with suitable AC power adapter. Please connect the head of AC power adapter to the AC power input port of this device, then insert the plug of AC power adapter into the socket of 11 DY -240V.
-
Press the power button on the front panel of the device or press the power button on remote control to turn it on. And then turn on the TV.
-
The corresponding video source is selected on TV.
-
Connect AV Cable to TV
The connection method is same as connecting HDMI cable.
Z2600 Specification
Boot Initialization Wizard
Before using the machine formally, the system will perform the initial setup. Please set according to devices and requirements to get the best visual experience.
-
System language selection, screen zoom, time zone setting Choose the system language according to your language habit.
Press the UP and DOWN buttons on remote control to adjust screen display area.
Select the time zone for the system according to your location. -
Bluetooth Match-Up
Let remote controller be aligned with media player and press Page-Down KEY and Menu KEY at the same time for least 5 second until indicator light blinking.The light will be off after matching successfully. -
Network Setting
Configure network to connect device with network quickly.
WIFI : choose network SSID, input password and connect WIFI. Ethernet: plug in the network cable to connect the network automatically . -
Select output mode
Please select the corresponding mode according to your needs, then it will finish relevant setting.
Wizard mode: select the corresponding option according to your usage environment and device connection. The wizard mode Expert mode: The audio and video output is customized by users, it is recommended for professionals. -
The key definition
Define the corresponding functions for number keys, timing key, subtitle key, audio key, up and down keys and page keys on the remote control according to your usage habits.
After completing settings above, please follow prompts and click “Next” to finish initial setup. Enjoy Zidoo audio visual feast!
OTA System Update
Zidoo will update the firmware from time to time. Find the update icon in APPs
and click it, online update and local update are supported. After ticking
“Automatically check online upgrade”, you will receive the prompt for the
latest firmware update automatically.
-
Online Update
Click “Online Update” to obtain information of online update. -
Local Update
Users can download the update files on the forum or official website and update firmware through files. Copy the downloaded update file to USB disk. Click “USB update” to select the update file.
Download the update file by online update or local update. Click “Update” to update it.
The system will automatically check the update file whether is completed or not.
Note : Automatically access to system upgrade. Please don’t power off in the progress.
Once the update process is completed, the system will automatically restart.
Special Note:
To guarantee user experience, Zidoo will update the firmware from time to
time. Therefore, this manual may not be totally in line with the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>