zidoo Z20 PRO 4K UHD Media Player Instruction Manual

Z20 PRO 4K UHD Media Player
Instruction Manual

4K UHD MEDIA PLAYER

Introduction to Hardware of Z20 PRO

Device Interface
Zidoo Z20 PRO is equipped with audio and video input & output ports and data transmission ports. Please refer to the descriptions in this manual.
1. Front 2. Right 3. Back Instruction t o installation of the antenna: Please insert the two antennas in the parcel into the antenna ports in the above diagram.
Note:
Please load/change the hard disk after turning off the power. If it is a brand-new hard disk, Please load it after formatting it.
Please prevent the orifice of the cooling fan from being blocked.
Do not touch any liquid in case the liquid runs into the inner part of the device and damage it.
Any maintenance personnel who are not appointed are not allowed t o open the case.

Load the Hard Disk

Z20 PRO is equipped with 3.5 inches HDD Bay and high speed SATA transmission port. The hard disk can be loaded by pushing with hand.
(The maximum hard disk supports 14 TB }
Note: Do not load or change the hard disk while the power is on to avoid damage of the device or hard drive data. If it is a brand-new hard disk , please format it before loading it to the device. This device supports hard disk of the following formats: EXT3, EXT4, NTFS, FAT32, EXFAT.

Device Connection

1. Connect HDMI Cable to TV

2. Cut off the power. Please make sure the power of the TV and media player are off.

3. When the TV is turned off, please connect HDMI OUT port on Zidoo t o HDMI IN port on TV.

4. Connect with the power. This device i s equipped with suitable DC power acapter. Please connect the head of DC power adapter to the DC power input port of this device, then insert the plug of DC power adapter into the socket of 110V – 240V.

5. Corresponding video source is selected by TV.

6. Connect AV Cable to the TV
   The connection method is same as connecting HDMI cable.

7. Assembly Sequence to Connect RS232 to 3.5mm Connector

Z20 PRO Specification

range, support audio pass-through
Video Decoding| 4K@60p,AV1 /HEVC/H.265,12Bit, HDRI 0, HDR10+, Dolby vision
Audio Decoding| Support high-definition audio pass-through and audio decode
Intelligent Control| Mobile APP control, RS-232, TCP/IP control and WOL support
SATA| 1HDD Bay
USB| 1USB 3.0, 2USB 2.0
Power Supply| DC 12V 2A
Other interface| 1 IR Receiver, 1 RCA Cvbs,lRCA Audio L/R Channels, lCoaxia1/1SPDIF(2CH, 5.1CH), 13.5 (mm) RS-232, 2External High-Gain Antenna

Boot Initialization Wizard

Before using the machine formally, the system will perform the initial setup. Please set according to devices and requirements t o get the est visual experience.
1. System language selection, screen zoom, time zone setting
Choose the system language according to your language habit.Press the UP and DOWN buttons on remote control to adjust screen display area.Select the time zone for the system according to your location.2. Network Setting
Configure network to connect device with network quickly WIFI: choose network SSID, inout password and connect WIFI.
Ethernet: plug in the network cable to connect the network automatically.
3. Select output mode
Please select the corresponding mode according to your needs, then it will finish relevant setting.
Wizard mode: select the corresponding option according to your usage environment and device connection.Expert mode: The audio and video output is customized by users, it is recommended for professionals. 4. The key definition
Define the corresponding functions for number keys, timing key, subtitle key, audio key, up and down keys and page keys on the remote control according to your usage habits.After completing settings above, please follow prompts and click “Next” until entering Zidoo user interface. Enjoy Zidoo audiovisual feast!

OTA System Update

Zidoo will update the firmware from time t o time. Find the update icon in APPs and click it, online update and local update are supported. After ticking “Automatically check online upgrade”, you will receive the prompt for the latest firmware update automatically. 1 . Online Update
Click “Online Update” to obtain information of online update. 2. Local Update
Users can download the update files on the forum or official website and update firmware through files.
Copy the downloaded update file to USB disk. Click “USB update” to select the update file.Download the update file by online update or local update. Click “Update” to update it.The system will automatically check the update file whether is completed or not. Note: Automatically access to system upgrade off in the progress. Please don’t power off in the progress.
Once the update process is completed, the system will automatically restart.

Special Note:
To guarantee user experience, Zidoo will update the firmware from time to time. Therefore, this manual may not be totally in line with the product.
User File………………………………..
User name………………………………
Sex………………………………………….
Address………………………………………
Telephone………………………………………
Zip………………………………………………
Product name……………………………….
Model……………………………………………
Fault description…………………………….
Guarantee Item

1. One year guarantee from date of purchased(not including fittings).
2. All of damage by man-made(tear open the housing, tear off the sticker, unnormally using), or losing this card, we will not guarantee.

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>