PHILIPS SCN550 Screeneo U5 Digital Projector User Guide
- June 4, 2024
- Philips
Table of Contents
Screeneo U5
Digital Projector
SCN550
Quick Start Guide
SCN550 Screeneo U5 Digital Projector
|
---|---
|
|
|
SOFTWARE END USER LICENSE AGREEMENT
This software end user license agreement (“this agreement”) is a legal and
binding agreement between you (either an individual or entity) and SCREENER
INNOVATION SA, a swiss company, with its principal office at Route de Lully
5c, 1131 Tolochenaz, Switzerland. This agreement gives you the right to use
certain software (the “Software”) including user documentation in electronic
form which may have been provided separately or together with a SCREENER
INNOVATION SA (Philips branded) product (the “device”) or a PC. By
downloading, installing, or otherwise using the software, you accept and agree
to be bound by all of the terms and conditions of this agreement. If you do
not agree to these terms and conditions, do not download, install, or
otherwise use the software. If you acquired the software in tangible media
e.g., cd without the opportunity to review this license and do not accept
these terms, you may receive a full refund of the amount, if any, that you
paid for the software if you return the software unused with proof of payment
within 30 days from the date of purchase.
1. Grant of License. This Agreement grants you a non-exclusive, non-
transferable, non-sublicensable license to install and use, on the Device or a
PC, as applicable, one (1) copy of the specified version of the Software in
object code format as set out in the user documentation solely for your
personal use. The Software is “in use” when it is loaded into the temporary or
permanent memory (i.e. RAM, hard disk, etc.) of the PC or the Device.
2. Ownership. The Software is licensed and not sold to you. This
Agreement grants you only the right to use the Software, but you do not
acquire any rights, express or implied, in the Software other than those
specified in this Agreement. SCREENER INNOVATION SA and its licensors retain
all rights, titles, and interests in and to the Software, including all
patents, copyrights, trade secrets, and other intellectual property rights
incorporated therein. The Software is protected by copyright laws,
international treaty provisions, and other intellectual property laws.
Therefore, other than as expressly set forth herein, you may not copy the
Software without the prior written authorization of SCREENER INNOVATION SA,
except that you may make one (1) copy of the Software for your backup purposes
only. You may not copy any printed materials accompanying the Software, nor
print more than one (1) copy of any user documentation provided in electronic
form, except that you may make one (1) copy of such printed
materials for your backup purposes only.
3. License Restrictions. Except as provided otherwise herein, you shall
not rent, lease, sublicense, sell, assign, loan, or otherwise transfer the
Software. You shall not, and you shall not permit any third party, to reverse
engineer, decompile, or disassemble the Software, except to the extent that
applicable law expressly prohibits the foregoing restriction. You may not
remove or destroy any product identification, copyright notices, or other
proprietary markings or restrictions from the Software. All titles trademark,
and copyright and restricted rights notices shall be reproduced on your backup
copy of the Software. You may not modify or adapt the Software, merge the
Software into another program or create derivative works based upon the
Software.
4. Termination of certain functionality. The Software may contain
components of certain licensed software including software licensed from
Microsoft Corporation (“Microsoft”) which implements Microsoft’s digital
rights management technology for Windows Media. Content providers are using
the digital rights management technology for Windows Media (“WM-DRM”) to
protect the integrity of their content (“Secure Content”) so that their
intellectual property, including copyright, in such content, is not
misappropriated. Your Device may also use WM-DRM software to transfer or play
Secure Content (“WM-DRM Software”). If the security of such WM-DRM Software is
compromised, Microsoft may revoke (either on its own or upon the request of
the owners of Secure Content (“Secure Content Owners”) the WM-DRM Software’s
right to acquire new licenses to copy, store, transfer, display and/or play
Secure Content. Revocation does not alter the WM-DRM Software’s ability to
play unprotected content. A list of revoked WM-DRM Software is sent to your PC
and/or your Device whenever you download a license for Secure Content.
Microsoft may, in conjunction with such license, also download revocation
lists onto your Device on behalf of Secure Content Owners, which may disable
your Device’s ability to copy, store, display, transfer, and/or play Secure
Content. Secure Content Owners may also require you to upgrade some of the WM-
DRM components distributed with this Software (“WM-DRM Upgrades”) before
accessing their content. When you attempt to play Secure Content, WM-DRM
Software built by Microsoft will notify you that a WM-DRM Upgrade is required
and then ask for your consent before the WMDRM Upgrade is downloaded. WM-DRM
Software built by SCREENER INNOVATION SA may do the same. If you decline the
upgrade, you will not be able to access Secure Content that requires the WM-
DRM Upgrade; however, you will still be able to access unprotected content and
Secure Content that does not require the upgrade. WM-DRM features that access
the Internet, such as acquiring new licenses and/or performing a required WM-
DRM Upgrade, can be switched off. When these features are switched off, you
will still be able to play Secure Content if you have a valid license for such
content already stored on your Device. However, you will not be able to use
certain of the WM-DRM Software features that require Internet access such as
the ability to download content that requires the WM-DRM Upgrade. All title
and intellectual property rights in and to the Secure Content are the property
of the respective Secure Content owners and may be protected by applicable
copyright or other intellectual property laws and treaties. This Agreement
grants you no rights to use such Secure Content. To summarize, if the Software
contains Microsoft WM-DRM components – Secure Content you desire to download,
copy, store, display, transfer, and/ or play is protected by the Microsoft WM-
DRM components of the Software. Microsoft, Secure Content Owners, or Secure
Content distributors may deny you access, or restrict your access, to Secure
Content even after you have paid for, and/or obtained, it. Neither your
consent nor the consent or approval of SCREENER INNOVATION SA is necessary for
any of them to deny, withhold or otherwise restrict your access to Secure
Content. SCREENER INNOVATION SA does not guarantee that you will be able to
download, copy, store, display, transfer, and/or play Secure Content.
5. Open Source Software. (a) This software may contain components that
are subject to open-source terms. This Agreement does not apply to this
software as such. More information can be found in the documentation. If
applicable, the source code that needs to be offered under the applicable open
source licenses will be delivered upon request, please contact
philips.projector.eu@screeneo.com
in English with product identification or for more information. (b) Your
license rights under this Agreement do not include any right or license to
use, distribute or create derivative works of the Software in any manner that
would subject the Software to Open Source Terms. “Open Source Terms” means the
terms of any license that directly or indirectly (1) create, or purport to
create, obligations for SCREENER INNOVATION SA with respect to the Software
and/or derivative works thereof; or (2) grant, or purport to grant, to any
third party any rights or immunities under the intellectual property or
proprietary rights in the Software or derivative works thereof.
6. Termination. This Agreement shall be effective upon the installation
or first use of the Software and shall terminate (i) at the discretion of
SCREENER INNOVATION SA, due to your failure to comply with any term of this
Agreement; or (ii) upon the destruction of all copies of the Software and
related materials provided to you by SCREENER INNOVATION SA hereunder.
SCREENER INNOVATION SA’s rights and obligations shall survive the termination
of this Agreement.
7. Upgrades. SCREENER INNOVATION SA may, at its sole option, make
upgrades to the Software available by general posting on a website or by any
other means or methods. Such upgrades may be made available pursuant to the
terms of this Agreement or the release of such upgrades to you may be subject
to your acceptance of another agreement.
8. Support Services. SCREENER INNOVATION SA is not obligated to provide
technical or other support (“Support Services”) for the Software. If SCREENER
INNOVATION SA does provide you with Support Services, these will be governed
by separate terms to be agreed upon between you and SCREENER INNOVATION SA.
9. Limited Software Warranty. SCREENER INNOVATION SA provides the
Software ‘as is and without any warranty except that the Software will perform
substantially in accordance with the documentation accompanying the Software
for a period of one year after your first download, installation, or use of
the Software, whichever occurs first. SCREENER INNOVATION SA’s entire
liability and your exclusive remedy for breach of this warranty shall be, at
SCREENER INNOVATION SA’s option, either (i) return of the price paid by you
for the Software (if any); or (b) repair or replacement of the Software that
does not meet the warranty set forth herein and that is returned to SCREENER
INNOVATION SA with a copy of your receipt. This limited warranty shall be void
if failure of the Software has resulted from any accident, abuse, misuse, or
wrongful application. Any replacement Software will be warranted for the
remainder of the original warranty period or thirty (30) days, whichever is
longer. This limited warranty shall not apply to you if the Software was
provided to you free of charge on an evaluation-only basis.
10. No other warranties. Except as set forth above, SCREENER INNOVATION
SA and its licensors do not warrant that the software will operate error-free
or uninterrupted, or will meet your requirements. You assume all
responsibilities for the selection of the software to achieve your intended
results, and for the installation of, use of, and results obtained from the
software. To the maximum extent permitted by applicable law, SCREENER
INNOVATION SA and its licensors disclaim all warranties and conditions,
whether express or implied, including but not limited to the implied
warranties of merchantability, fitness for a particular purpose, and accuracy
or completeness of results with respect to the software and the accompanying
materials. There is no warranty against infringement. SCREENER INNOVATION SA
does not warrant that you will be able to download, copy, store, display,
transfer, and/or play secure content.
11. Limitation of liability. Under no circumstances will SCREENER
INNOVATION SA or its licensors be liable for any consequential, special,
indirect, incidental, or punitive damages whatsoever, including, without
limitation, damages for loss of profits or revenues, business interruption,
loss of business information, loss of data, loss of use or other pecuniary
loss, even if SCREENER INNOVATION SA or its licensors have been advised of the
possibility of such damages. In no event shall SCREENER INNOVATION SA or its
licensors aggregate liability for damages arising out of this agreement exceed
the greater of the price actually paid by you for the software or five pounds
sterling (5.00). 12. Trademarks. Certain product names used in this
Agreement, the Software, and the printed user documentation may be
(registered) trademarks of SCREENER INNOVATION SA, its licensors, or other
third parties. You are not authorized to use any such trademarks.
13. Export Administration. You agree that you will not directly or
indirectly, export or re-export the Software to any country for which the
United States Export Administration Act or any similar United States law or
regulation requires an export license or other U.S. Government approval unless
the appropriate export license or approval has first been obtained. By
downloading or installing the Software you agree to abide by this Export
provision.
14. Governing Law – Litigations. This Agreement shall be governed by
Swiss Law. Any dispute arising in connection with this Agreement, if not
settled amicably, shall be brought to the competent court of Switzerland.
15. General. This Agreement contains the entire agreement between you
and SCREENER INNOVATION SA and supersedes any prior representation,
undertaking, or other communication or advertising with respect to the
Software and user documentation. If any part of this Agreement is held
invalid, the remainder of this Agreement will continue in full force and
effect. This Agreement shall not prejudice the statutory rights of any party
dealing as a consumer.
WARRANTY CARD
Dear Customer, you may obtain a copy of the warranty conditions from the
dealer, by downloading it from the internet or by contacting the customer
support center. Please retain your sales receipt and the warranty card!
Device type, model, and serial number
Date of purchase, invoice number
Name, address, telephone number, stamp, and signature of the vendor/retailer
Name & Address of Customer
Repair Number| Service Center| Repair Acceptance Date| Return Date| Defect
Specification
---|---|---|---|---
| | | |
| | | |
| | | |
Description of the Repair| Spare Part(s)/Nr.| Warranty Period of the New
Component(s)
| |
| |
| |
COUNTRY | HOTLINE | Lithuania | 3.71E+10 |
---|---|---|---|
Argentina | See international support | Luxemburg | +352 2786 21 07 |
Australia | 1800 251 367 | Malaysia | +60 16 299 1498 |
Austria | +43 720 881 525 | Mexico | +52 55 4166 7410 |
Belgium | +32 78 077 761 (FR) / 209 (NL) | Morocco | +212 641 631 095 |
Brasil | +55 85 4042 1414 | Netherlands | +31 85 0013 738 |
Bulgaria | See international support | New Zealand | 0800 426 237 |
Canada | +1 873-514-1003 | Norway | +47 21 |
95 41 81
Chile| +56 2249 94507| Poland| +48 61 880 12 15
Colombia| +57 1 328 8975| Portugal| See international support
Croatia| See international support| Puerto Rico| +1
787-305-3813
Czech Republik| +420 910 880 087| Romania| +40 31 630 5446
Denmark| +45 78 76 93 84| Russia| +749 5148 82 08
Egypt| +20 111 456 1786| Serbia| See international support
Estonia| 3.73E+09| Singapore| +65 6841 2668
Finland| +358 75325 82 56| Slovakia| See international support
France| +33 6 44 60 30 83| Slovenia| See international support
Germany| +49 421 836 79789| Spain| +34 518 889 132
Great Britain| +44 131 322 1364| Sweden| +46 8 580 97 043
Greece| +30 261 118 0299| Switzerland| +41 21 539 16 66 (DE) / 67 (IT) / 68
(FR)
China| (+86)01059357346| Turkey| + 90 (212) 2697676
Hong Kong SAR| +852 3183 0168| UAE| +971 4 4473106
Hungary| +36 1 998 9144| USA| +1
812-308-4615
Indonesia| +62 855 7467 6380| Italy| +39 0 776 1580046
Ireland| +353 76 680 5635| Japan| -4028
Israel| -9417258| Latvia| 3.72E+10
International customer support: +41 21 53 91 665
@philips.projector.eu@screeneo.com
www.philips.com/support and our
Community: https://community.screeneo.com
RED Caution
The product shall be connected to a USB interface of version USB2.0 or higher.
The operating temperature of the EUT can’t exceed 35 Degrees Celsius and
shouldn’t be lower than 0 Degree Celsius.
Only indoor use for band 5150-5350MHz.
Hereby, Screeneo Innovation SA declares that this product is in compliance
with essential requirements and other relevant provisions of Directive
2014/53/EU.
This product is allowed to be used in all EU member states.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Screeneo Innovation SA is
under license. Other trademarks and trade names are those of their respective
owners.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress,
and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
FCC ID: 2ASRT-SCN550
FCC Warning
15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
15.21 Information to the user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
- This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Frequency bands
2412-2472MHz
2402-2480MHz
5150-5725MHz
5725-5850MHz| Maximum output power (EIRP)
z 16.35dBm
z 13.71dBm
z 16.18dBm
z 13.45dBm
---|---
Screeneo Innovation SA
Route de Lully 5C
1131 – Tolochenaz – Switzerland
www.philips.com
philips.projector.eu@screeneo.com|
EUROPEAN Service Center:
Euro Repair Center
Europa-Allee-77
54343 Föhren
Germany| NORTH AMERICA Service Center:
Cooper General Global Services, Inc.
8501 NW 17th Street,
Suite 102 (Docks 32 – 33)
Doral, FL 33126, USA
---|---|---
Philips and the Philips Shield Emblem have registered trademarks of
Koninklijke Philips
N.V. and are used under license.
This product has been manufactured by and is sold under the responsibility of
Screeneo Innovation SA, and Screeneo Innovation SA is the warrantor in
relation to this product.
2022 © Screeneo Innovation SA
All right reserved
Download the full user manual at: www.philips.com/support and register your product for further support.
Screeneo U5
Thank you for choosing our Digital Projector.
We carefully engineered and crafted this product for you to enjoy TV shows,
devour your favorite movies, laugh, cry, and share your best moments with your
loved ones.
If you are happy, we are happy!
Share your best moments on:
References
- Philips - United States | Philips
- Philips Customer Service Support - Home | Philips
- Philips Projection - Find help, share ideas, and get updates
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>