UGEARS Tugboat Beginner Model Ship kit User Manual
- June 15, 2024
- UGEARS
Table of Contents
UGEARS Tugboat Beginner Model Ship kit
Mechanical models
- Assembly instructions : Remove model parts from the hanger board as illustrated below. Careful not to break parts.
- If a part does not remove easily, carefully cut it out with a knife.
- This model is intended for self-assembly without glue. If you have difficulty installing the axles, try waxing them with a regular candle.
- All moving parts can also be waxed during assembly to reduce friction when operating the model.
Warning!
Do not use a lighted candle- Caution! Axles have sharp points!
Spare parts
- Customer support
SYMBOLS
- Wax the part with a regular candle (rub with a candle).
- Pay attention.
- The part should be easily rotated (moved).
- Sand to remove burrs.
- Break off or cut out.
- This is not a structural comment and assembly
- Check size.
ASSEMBLY INSTRUCTIONS
MACHENICAL MODEL
Thanks for following along on this journey with us.
- Customer support
Read User Manual Online (PDF format)
Loading......