UGears Tower Windmill 3D Mechanical Educational Wooden Puzzles for Kids Instruction Manual
- June 15, 2024
- UGEARS
Table of Contents
Model «Tower Windmill»
Assembly instructions
Tower Windmill 3D Mechanical Educational Wooden Puzzles for Kids
Assemble Me.
Whirl Me
https://ugearsmodels.com/tower-windmill.html
Remove model parts from the hanger boerd as Mustrated below. Careful not to
break parts. If 3 part does not remove easily, carefully cut it out witha
knife. This model is intended for self-assembly without glue. If you have
difficulty installing the axtes, try waxing them with a reguiar candle, All
moving parts can also be waned during assembly to reduce friction when
operating the model.
Warning!
Do not use a lighted candle!
Caution! Axles have sharp points!
Symbols
Wax the part with a regular candle (rub with a candle).
Pay attention. Check for correct orientation or positioning.
Press the parts as far as they will go.
The part should be easily rotated (moved).
Check the mechanism for smooth and correct movement. Operate the mechanism to
seat the parts in their positions.
Sand to remove burrs.
Break off or cut out.
This is not a structural component; it & 9 tool for measurement and assembly,
Spare parts.
|
---|---
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thanks for following along on this journey with us.
ugearsmodels.com
Customer support
customerservice@ugearsmodels.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>