UGEARS VM-03 Heavy Boy Truck Instruction Manual
- June 15, 2024
- UGEARS
Table of Contents
UGEARS VM-03 Heavy Boy Truck Instruction Manual
Assembly instructions
Remove model parts from the hanger board as illustrated below. Careful not to break parts. If a part does not remove easily, carefully cut it out with a knife. This model is intended for self-assembly without glue. If you have difficulty installing the axles, try waxing them with a regular candle. All moving parts can also be waxed during assembly to reduce friction when operating the model.
Warning
Do not use a lighted candle
Caution! Axles have sharp points
Symbols
- Wax the part with a regular candle (rub with a candle)
- Pay attention. Check for correct orientation or positioning
- The part should be easily rotated (moved).
- Cut crosspieces before removing the part from the board.
- Sand to remove burrs.
- Break off or cut out.
Spare Parts
Axle
Check size
Assembly instructions
Assemble Me. Hook Up & Load Me
Thanks for following along on this journey with us.
Customer support
customerservice@ugearsmodels.com
Read User Manual Online (PDF format)
Loading......