UGEARS Royal Carriage Wooden Construction Kit Instruction Manual
- June 15, 2024
- UGEARS
Table of Contents
Model «Royal Carriage»
Assemble Me
Royal Carriage Wooden Construction Kit
Assembly instructions
https://ugearsmodels.com/royal-carriage.html
Mechanical models
Assembly instructions:
Remove model parts from the hanger board as illustrated below. Careful not to
break parts. If a part does not remove easily, carefully cut it out with a
knife. This model is intended for self-assembly without glue. If you have
difficulty installing the axes, try waxing them with a regular candle.
All moving parts can also be waxed during assembly to reduce friction when
operating the model.
Customer support
customerservice@ugearsmodels.com
Warning!
Do not use a lighted candle!
Caution! Axles have sharp points!
Symbols
Wax the part with a regular candle (rub with a candle).
Pay attention. Check for correct orientation or positioning.
The part should be easily rotated (moved).
Perform the same steps in mirror image.
Sand to remove burrs.
Break off or cut out.
Spare parts.
This is not a structural component; it is a tool for measurement and
assembly.
|
---|---
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thanks for following along on this journey with us.
ugearsmodels.com
Customer support
customerservice@ugearsmodels.com
Documents / Resources
|
UGEARS Royal Carriage Wooden Construction
Kit
[pdf] Instruction Manual
Royal Carriage Wooden Construction Kit, Royal Carriage, Wooden Construction
Kit, Construction Kit
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>