earfun Free Pro 3 Noise Cancellation Earbuds User Manual
- June 15, 2024
- EarFun
Table of Contents
EarFun Free Pro 3
ANC Wireless Earbuds
User Manual
1 EarFun Audio App
Download the EarFun Audio app for an enhanced experience.
- Equalizer tuning, customizing touch controls
- Firmware updates, earbuds and charging case battery status
- Less data tracking, personalized device name
- Built-in feedback, and more
Please update your earbuds firmware to the latest version via the EarFun Audio App for the best user experience.
2 How to Fit
The wrong ways to wear
- Insert
- Rotate
Note:
- Please choose the suitable eartip and earhook for the best sound and secure fit.
- Select the left or right earbud and insert to the corresponding ear.
- Rotate the earbud back and forth for the eartip to create a comfortable seal.
3 What’s in the Box
EarFun Free Pro 3 Charging Case Ear Tips (XS, S, M, L, XL)
Ear Hooks (S, M, L) USB-C Cable User Manual
4 Product Diagram
(1) Touch control zone
(2) Earbuds LED indicator
(3) Microphone
(4) Charging contactor
(5) USB-C charging port
(6) Charging case
(7) Charging case button
(8) Battery level indicator
5 Pairing Your Earbuds
Insulating film
1. First-time Pairing with Device
Step1. Remove the insulating film on both earbuds.
Step2. Put both earbuds back into the charging case and close the charging
case.
Step 3. Open the charging case and the earbuds will automatically power on and
go into pairing mode.
Step 4. Activate Bluetooth on your Bluetooth-enabled device and search for
other Bluetooth devices.
Step 5. Select “EarFun Free Pro 3” from the list of Bluetooth devices shown.
(if a password is requested, type ‘0000’.)
Notes:
- The earbuds will automatically connect with the previously paired device when the case is open.
- Each earbud can be used independently.
2. Connect to a New Device
Option A
Step 1. Unpair the earbuds from the Bluetooth-enabled device that’s connected.
The earbuds will disconnect from the current device and go into pairing mode
to be paired again.
Step 2. Search on the new device and connect.
Option B
Step 1. Put both earbuds back into the charging case and make sure they are
being charged. Keep the lid open – then press and hold the button on the case
for 3 seconds until the LED indicators on earbuds start flashing blue rapidly.
Step 2. Search on the new device and connect.
- Flashing blue rapidly
3. Pairing and connecting two Bluetooth devices simultaneously
Step1. Pair with the first device and stay connected.
Step2. Keep the earbuds in the charging case, then press and hold the button
on the case for 3 seconds until the LED indicator on earbuds starts flashing
blue rapidly. The earbuds will enter pairing mode and disconnected from the
first device.
Step3. Search on the second device to connect the earbuds.
Step4. Manually reconnect the earbuds on the first device.
- Flashing blue rapidly
Note:
The earbuds will automatically connect to both devices after finishing setting
up the multipoint connection.
6 Functions
Open to power on
Close to power off
Note:
If the earbuds are not connected to any device, they will automatically power
off after 10 minutes for saving the battery life.
Playing music
-
Volume down
Tap once (L) -
Previous track
Tap triple (L) -
Play/Pause
Tap twice (L/R) -
Next track
Tap triple (R) -
Volume up
Tap once (R)
Noise cancelling control
Noise cancelling/Ambient sound/ Normal
- Tap and hold for 2s (L)
Hands free conversation
Answer/End a call
- Tap twice (L/R)
Reject a call
- Tap and hold for 2s (L/R)
Answer and transfer two calls
- Tap triple (L/R)
Activate the voice assistant
Voice assistant
- Tap and hold for 2s (R)
Game Mode: Please enable in EarFun Audio app
7 Earbuds LED Indicator
| Power on | Blue indicator flashes for 1s |
|---|---|
| Power off | Red indicator flashes for 1s |
| Pairing mode | Indicator flashes blue |
| Successfully connected | Indicator turns off |
| Factory reset | Indicator flashes purple |
8 Reset and Reconnecting
If you fail to establish a connection between two earbuds or between the earbuds and Bluetooth devices, please try the following steps:
- Put both earbuds into the charging case.
- Keep the charging case open, then press and hold the button on the case for at least 8s until the LED indicators on earbuds flash purple. The earbuds have been successfully reset.
- Delete the previous connection from the Bluetooth device and reactivate Bluetooth to reconnect “EarFun Free Pro 3”.
- Flashing purple rapidly
9 Charging
- Dry the earbuds, charging contactors and USB port completely before charging.
- Open or close the charging case to activate the case battery level LED indicator.
- Put earbuds back into the charging case and the earbuds will start charging.
- Fully charge both the earbuds and the charging case before first use.
a) Battery level:
- Green 30%-100%
- Yellow 10%-30%
- Red <10% Please charge
Connect USB-C cable for charging
Wireless charging supported (Wireless charging pad not included)
- Red – Charging
Green – Charging complete
10 Specifications
| Bluetooth version | V5.3 |
|---|---|
| Bluetooth frequency | 2.402GHz-2.480GHz |
| Bluetooth profile | A2DP, AVRCP, HFP, HSP |
| Bluetooth transmitted power | <7dBm (for EU) |
| Maximum working range | 15m(without obstacles) |
| Battery capacity | 40mAh x 2(earbuds), 420mAh(charging case) |
| Charging time | 1.5 hours(for earbuds), |
2 hours(for charging case via USB-C),
3.5 hours(for charging case via wireless charger)
Playtime| ANC OFF – Up to 7.5 hours. Totally 33 hours with the charging case;
(varies by volume level and audio content),
ANC ON – Up to 6 hours. Totally 27 hours with the charging case; (varies by
volume level and audio content)
Input| 5V ⎓ 1A
Dimensions| 67mm x 26.5mm x 30mm
Weight| 41.5g
11 Troubleshooting
Q: The earbuds are turning on, but fail to connect to my device?
A: To connect your earbuds to your device, please remove the insulating films
from both earbuds and check that Bluetooth is enabled. If the earbuds still
don’t connect, try resetting them or contact us for assistance.
Q: What to do if one earbud is silent or has low volume?
A: If the earbud’s LED is lit, carefully clean the dirt from the speak mesh
using a toothpick or cotton swab dipped in alcohol. Try to reset the two
earbuds and reconnect. If the issue persists, please contact us for
assistance.
Q: What to do if the earbuds are uncomfortable to wear?
A: Select the appropriate size of eartips and earhooks, then correctly wear
the earbuds.
Q: How to resolve noise issues?
A: Please choose suitable eartips and earhooks, rotate earbuds for a snug fit.
Note that slight background noise in quiet environments in ANC mode is normal
for all kinds of ANC earbuds.
Q: What to do if the other person cannot hear clearly during a call?
A: Please adjust the position of the earbuds to ensure that the voice
microphone is pointing towards the direction of the speaker’s voice. Ensure
the Bluetooth device uses the earbud’s microphone for calls.
Q: What to do if the earbuds fail to connect to the app?
A: Ensure Bluetooth connection and Location permissions are enabled for the
app. These permissions do not involve any privacy information. You can also
download the latest version of the app or uninstall and reinstall it if
needed.
Q: What to do if the audio quality does not meet your expectations?
A: We suggest personalizing your audio settings according to your preferences
in the EarFun Audio app’s EQ settings.
Q: Why is the connection not stable and cuts out intermittently?
A: Please check for any objects obstructing the earbuds and the Bluetooth
device, and avoid any potential radio or WiFi interference. While the earbuds
have a maximum range of 49 feet (15m) without obstacles, the actual range may
vary depending on usage and the environment.
Q: Is the charging case waterproof?
A: No, the earbuds are sweat and waterproof, but the charging case is not.
Customer Service
For FAQS and more information:
Please send an email to: [email protected]
www.myearfun.com
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
CAUTION
Risk of explosion if the battery is replaced by an incorrect type
Disposal of a battery into fire or a hot even, or mechanically crushing or
cutting of a battery, that can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or the leakage of flammable liquid or gas;
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
BLUETOOTH
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Earfun Technology (HK) Limited is under license.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its
subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United
States and other countries. aptX is a trademark of Qualcomm Technologies
International, Ltd., registered in the United States and other countries.
Other trademarks and trade names are those of their respective owners.
EU Declaration of Conformity
Earfun Technology (HK) Limited hereby declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and RoHS 2011/65/EU Directive. The declaration of conformity may be consulted in the support section of our Web site, accessible from www.myearfun.com
UK Declaration of Conformity
Hereby, [Earfun Technology (HK) Limited] declares that the radio equipment type [TW400] is in compliance with UK Radio Equipment Regulations (SI 2017/1206). The full text of the declaration of conformity is available at the following internet address. www.myearfun.com
ISED Compliance Statements
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s) Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment.
MODEL: TW400
FCC ID: 2AVIT-TW400L HVIN: TW400L, IC: 25936-TW400L
FCC ID: 2AVIT-TW400R HVIN: TW400R, IC: 25936-TW400R
