CHAMPION POWER EQUIPMENT 201246 Lithium Series 120 Watt Portable Solar Panel Instruction Manual

CHAMPION POWER EQUIPMENT 201246 Lithium Series 120 Watt Portable Solar

Panel

Specifications

• Model Number: 201246
• Power: 120W

Product Usage Instructions

Introduction

Congratulations on your purchase of the Champion Power Equipment (CPE) 120W Solar Panel. This product is designed, built, and supported to strict specifications and guidelines. With proper product knowledge, safe use, and regular maintenance, this solar panel should provide years of satisfying service. Every effort has been made to ensure the accuracy and completeness of the information in this manual at the time of publication, and we reserve the right to change, alter and/or improve the product and this document at any time without prior notice.
CPE highly values how our products are designed, manufactured, operated, and serviced as well as providing safety to the operator and those around the generator. Therefore, it is IMPORTANT to review this product manual and other product materials thoroughly and be fully aware and knowledgeable of the assembly, operation, dangers and maintenance of the product before use. Fully familiarize yourself, and make sure others who plan on operating the product fully familiarize themselves too, with the proper safety and operation procedures before each use. Please always exercise common sense and always err on the side of caution when operating the product to ensure no accident, property damage, or injury occurs. We want you to continue to use and be satisfied with your CPE product for years to come.
When contacting CPE about parts and/or service, you will need to supply the complete model and serial numbers of your product. Transcribe the information found on your product’s nameplate label to the table below

Safety Definitions

• DANGER: Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
• WARNING: Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
• CAUTION: Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
• NOTICE: Indicates information considered important, but not hazard-related (e.g., messages relating to property damage).

IMPORTANT SAFETY INSTRUCTIONS

WARNING

Cancer and Reproductive Harm – www.P65Warnings.ca.gov

WARNING

Read all safety warnings and all instructions. Failure to follow the warnings and instruction may result in electric shock, fire and cause serious injury. Save all warnings and instruction.

DANGER

• Keep your solar panel in a dry, well-ventilated area when not in use.
• Do not use or store solar panels near open flames or flammable materials.
• Do not operate the solar panel with damaged output cable or connectors.
• Do not allow children or unqualified persons to operate or service the solar panel.
• Do not bend the solar panel.
• Do not step on or place objects on top of the solar panel.
• The output circuit of the solar panels must be correctly connected to the device.
• Do not reverse or short-circuit the positive and negative poles. Ensure that there is no gap between the insulated connections. If there is a gap, sparks or electrical shocks will occur.
• Do not submerge the solar panel in water.
• Do not leave or submerge the connector ends in water.
• Do not allow corrosive chemicals or conductive fluids, such as seawater, industrial chemicals, bleach or bleach containing products to come in contact with the solar panel.

WARNING

To avoid fire or electrical shock hazard, observe all ratings on the solar panel and accessory products you intend to use. In case of emergency, call 911 immediately. NEVER use this product to power life support devices or life support appliances. Inform your electricity provider immediately if you or anyone in your household depends on electrical equipment to live. Inform your electrical provider immediately if a loss of power would cause you or anyone in your household to experience a medical emergency.

WARNING

DO NOT use or connect solar panels in any way that exceeds the input specifications of the devices used with the solar panels. DO NOT use or connect solar panels in any way that exceeds the current and voltage limits of the extension cable’s wire gauge (AWG). Always consult NEC 310-16 Allowable Ampacities of Insulated Conductors chart. DO NOT tamper or modify the solar panel in any way.

WARNING

Use the solar panel only for intended uses. DO NOT expose solar panel to excessive moisture, dust, or dirt. If connected devices overheat, turn them off and disconnect them from the solar panel.
DO NOT use the solar panel if:

• Electrical output is lost
• Equipment sparks, smokes or emits flames

FEATURES

Read this operator’s manual before operating your solar panel. Familiarize yourself with the location and function of the features. Save this manual for future reference.

Solar Panel

1. Carrying Handle – Used to lift or carry the unit.
2. Kickstand – Used to support the solar panel.
3. Cable Storage Pocket – Used to store the cables and Operator’s Manual.
4. MC4 Connectors – Used to connect to desired device or extension cable.

Parts Included

Accessories

• 10 ft. (3 m) MC4 Extension Cable (14AWG)

OPERATION

WARNING

Max open circuit voltage should never exceed the max input voltage of the device or power station. Use a multimeter,
or consult a qualified technician, to check the solar panel’s voltage only when the solar panel is disconnected and during peak sunlight to get correct maximum readings. Voltages may be higher in colder temperatures or when the solar panel is cold. Check your device’s operator’s manual for correct configuration when connecting more than one solar panel. Generally, it is not recommended to connect multiple solar panels when charging small devices and some Power Stations as the voltage and/or current may exceed the maximum input specifications. DO NOT use or connect solar panels in any way that exceeds the current and voltage limits of the extension cable’s wire gauge (AWG). Always consult NEC 310-16 Allowable Ampacities of Insulated Conductors chart. This is espeically important when connecting solar panels in parallel.

1. Unbuckle the storage straps.
2. Partially unfold the solar panel so it can stand on its own.
3. Extend each kick stand one by one and fully unfold the solar panel
4. . Adjust the solar panel to face the sun as much as possible, avoiding any shaded spots, trees, or obstructions in the sun’s path throughout the day. Frequent and minor adjustments can show a significant increase in power.
5. Remove the cables from the storage pocket. Connect the solar panel to the device or power station. Ensure the connectors are pressed together tightly and no gap exists. Keep connections away from puddles and standing water.
6. Remove the cables from the storage pocket. Connect the solar panel to the device or power station. Ensure the connectors are pressed together tightly and no gap exists. Keep connections away from puddles and standing water.

MAINTENANCE

Cleaning the Solar Panel

CAUTION

Do not scratch the solar panel with abrasive cleaning pads or brushes. Only use damp cloth to clean. Even minor scratches can diminish performance. Gently wipe the surface of the solar panel with a damp cloth to remove any dust and debris. Remove animal droppings and stuck on objects as soon as possible. It is important to clean the solar panel regularly as even dust you may not see can lower the efficiency of the solar panel.

FREQUENTLY ASKED QUESTIONS (FAQ)

Can I use this panel with any Power Station or Solar Generator?

| This solar panel will work with any Champion Power Station and most other power stations and solar generators that have MC4 connections. Third Party adapters can be purchased to fit other connectors.

Why can’t I achieve the rated wattage?

| Due to thermal and power losses when converting the sun’s energy to usable power and DC to DC conversion in the power station, no solar panel can achieve its full rated wattage.

Always consider the weather conditions including cloudiness, temperature, and angle to the sun. Ensure your solar panel is clean and free of dust and within allowable range of your power stations input specs.

Can I run this panel in series or parallel with multiple panels?

| Yes, always check the resulting voltage and current and your devices operator’s manual. Running in series will increase the voltage and running in parallel will increase the current. Do not exceed the input specifications of the device being charged.

Especially when connecting solar panels in parallel with extension or or other third party cables, always consult NEC Ampacity Chart to

check current does not exceed the limit of the wire gauge (AWG) and

length used.

Do I need a charge controller?

| Not for any Champion products and most other Power Stations. Consult your product’s manufacturer directly for other products.

Is the solar panel waterproof?

| The solar panel is rated IP65 meaning it does protect from water, light rain, and dust intrusion. However, to increase the life of your solar panel, it is best to store indoors when not in use and avoid rain and avoid getting soaked. Never submerge in water.

SPECIfICATIONS

• Model: 201246
• Peak Power:   120W
• Solar Cell:  Monocrystalline
• Solar Cell Lamination:    ETFE
• Cell Efficiency:   22%
• Voltage at Max Power (Vmp):   V
• Current at Max Power (lmp):    6.5A
• Open Circuit Voltage (Voc):    21.8A
• Short Circuit Current (lsc):    6.9A
• Operating Temperature (°F/°C) :  14 to 149/-10 to 65
• Optimal Operating Temperature (°F/°C):    77/25
• Weight:   13.2 lb. (6 kg)

Unfolded

• Length: 67.1 in. (170.4 cm)
• Width:   21.1 in. (53.5 cm)
• Height:  1.0 in. (2.5 cm)

Folded

• Length:   18.1 in. (46 cm)
• Width :  21.1 in. (53.5 cm)
• Height:    1.4 in. (3.6 cm)

WARRANTY

CHAMPION POWER EQUIPMENT  2 YEAR LIMITED WARRANTY
Warranty Qualifications

To register your product for warranty and FREE lifetime call center technical support please visit: https://www.championpowerequipment.com/register
To complete registration you will need to include a copy of the purchase receipt as proof of original purchase. Proof of purchase is required for warranty service. Please register within ten (10) days from date of purchase.

Repair/Replacement Warranty

CPE warrants to the original purchaser that the mechanical and electrical components will be free of defects in material and workmanship for a period of two years (parts and labor) from the original date of purchase and 180 days (parts and labor) for commercial and industrial use. Transportation charges on product submitted for repair or replacement under this warranty are the sole responsibility of the purchaser. This warranty only applies to the original purchaser and is not transferable.

Do Not Return The Unit To The Place Of Purchase

Contact CPE’s Technical Service and CPE will troubleshoot any issue via phone or e-mail. If the problem is not corrected by
this method, CPE will, at its option, authorize evaluation, repair or replacement of the defective part or component at a CPE Service Center. CPE will provide you with a case number for warranty service. Please keep it for future reference. Repairs or replacements without prior authorization, or at an unauthorized repair facility, will not be covered by this warranty.

Warranty Exclusions

This warranty does not cover the following repairs and equipment:

Normal Wear

Products with mechanical and electrical components need periodic parts and service to perform well. This warranty does not cover repair when normal use has exhausted the life of a part or the equipment as a whole.
Installation, Use and Maintenance This warranty will not apply to parts and/or labor if the product is deemed to have been misused, neglected, involved in an accident, abused, loaded beyond the product’s limits, modified, installed improperly or connected incorrectly to any electrical component. Normal maintenance is not covered by this warranty and is not required to be performed at a facility or by a person authorized by CPE.

Other Exclusions
This warranty excludes:

• Cosmetic defects such as paint, decals, etc.
• Wear items such as filter elements, o-rings, etc.
• Accessory parts such as storage covers.
• Failures due to acts of God and other force majeure events beyond the manufacturer’s control.
• Problems caused by parts that are not original Champion Power Equipment parts.

Limits of Implied Warranty and Consequential Damage
Champion Power Equipment disclaims any obligation to cover any loss of time, use of this product, freight, or any incidental
or consequential claim by anyone from using this product. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
A unit provided as an exchange will be subject to the warranty
of the original unit. The length of the warranty governing the exchanged unit will remain calculated by reference to the purchase date of the original unit.
This warranty gives you certain legal rights which may change from state to state or province to province. Your state or province may also have other rights you may be entitled to that are not listed within this warranty.

• Contact Information
  • Address Champion Power Equipment, Inc. 6370 S Pioneer Way, Unit 101 Las Vegas, NV 89113 USA www.championpowerequipment.com
• Customer Service
  • Toll Free: 1-877-338-0999
  • info@championpowerequipment.com
  • Fax no.: 1-562-236-9429
• Technical Service
  • Toll Free: 1-877-338-0999
  • tech@championpowerequipment.com
  • 24/7 Tech Support: 1-562-204-1188

or visit championpowerequipment.com

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>