Soliseed SRF675827DIM26E6P 5/6 Inch LED Can Lights Length Adjustable Recessed Lighting Installation Guide
- June 15, 2024
- soliseed
Table of Contents
INSTALL GUIDE
SRF675827DIM26E6P 5/6 Inch LED Can Lights Length Adjustable Recessed
Lighting
-
Turn power off
-
Remove previous fixture or bulb
-
Extend lamp at maximum height
-
Select CCT on backside
-
Screw in the E26 adaptor into the open socket
-
Push the trim until flush with celling In case the lamp trim cannot flush with the ceiling completely due to soft housing holder
6. 1 Retract a little bit according to the outstanding length. e.g. the length is 0.39″ then retract height 0.39″ 6.2 Rotate the trim to screw in the E26 adaptor into the socket until tight -
Turn power on and test
Risk of fire or electric shock. LED Retrofit Kit installation requires
knowledge of luminaires electrical systems. If not qualified, do not attempt
installation. Contact a qualified electrician.
Install this kit only in luminaires that have the construction features and
dimensions shown in the photographs and/or drawings and where the input rating
of the retrofit kit does not exceed the input rating of the luminaire.
Do not make or alter any open holes in an enclosure of wiring or electrical
components during kit installation.
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet
metal or other sharp objects.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>