ALTO PROFESSIONAL TrueMix 600 6 Channel Analog Mixer User Guide
- June 15, 2024
- ALTO PROFESSIONAL
Table of Contents
ALTO PROFESSIONAL TrueMix 600 6 Channel Analog Mixer
For articles, videos, and phone and web support.
DIGETTING STARTED
Package Contents: TrueMix 600, Power Adapter, USB Cable, Quickstart
Guide, Registration Card, Safety & Warranty Manual.
- REGISTER YOUR PRODUCT
- DOWNLOAD THE USER GUIDE
FEATURES
The following controls are available on each channel strip
- GAIN : Adjust channel level.
- EQ HI : Adjust treble frequencies.
- EQ LOW : Adjust bass frequencies.
- AUX SEND : Adjust signal sent to Aux Send Output.
- PAN: Adjust channel’s Left-Right position in the stereo field.
- VOLUME : Adjust volume level of the channel’s output signal. Decrease the GAIN and/or VOLUME if the PEAK LED flashes.
CONNECTIONS
- A. MIC INPUT (XLR ): Use PHANTOM POWER switch to enable +48V phantom power for condenser microphones.
- B. LINE INPUTS (1/4″, TRS, Mono or Stereo)
- C. CONTROL ROOM (1/4″, TRS): Use CONTROL ROOM/HEADPHONE OUTPUT to adjust output level to monitor or amplifier system.
- D. AUX/FX RETURN (1/4″, TRS): Connect to an external effects unit. Adjust level using AUX RETURN VOLUME knob.
- E. AUX SEND (1/4″, TRS): Connect to an external amplifier or to an active monitor to create a custom monitor mix using the AUX VOLUME knobs.
- F. MAIN OUT (1/4″ TRS): Connect to speakers or amplifier system. Adjust output level with the MAIN knob.
- G. HEADPHONE OUTPUT 1 (1/4″, TRS ): Connect a pair of stereo headphones to this output to monitor your mix. Press the SOURCE button to switch this output source from the MAIN OUT signal to the 2TK/USB signal. Turn the VOLUME KNOB beneath the output to adjust signal volume.
- H. HEADPHONE OUTPUT 2 (1/4″, TRS): Connect a pair of stereo headphones to monitor your mix. This output connects to the MAIN OUT signal only and is not affected by the SOURCE button. Turn the VOLUME KNOB beneath the output to adjust signal volume.
- 2TK/USB INPUT (RCA ): Connect external sound source. Adjust level using the 2TK/USB IN knob. Use TO MAIN button to send signal to MAIN OUT.
- J. 2TK/USB OUTPUT (RCA): Connect to external recording device.
BLUETOOTH
- Press and hold the BLUETOOTH button for 3 seconds, then release it. TrueMix 600 will enter pairing mode and the BLUETOOTH LED will flash.
- “TrueMix 600 BT” from your Bluetooth device’s setup screen.
- When paired successfully, the LED will be lit solid.
- To unpair, press and hold the BLUETOOTH button for 3 seconds, or hold for 10 seconds to unpair and forget the device.
- Turn up the AUX SEND knob on a channel to send the signal to a connected Bluetooth device.
- See the full User Guide for more information.
USB RECORDING AND PLAYBACK
Use the included USB cable to connect TrueMix 600 to your computer. Select
“USB AUDIO CODEC” as your default recording (input) and playback (output)
devices in the following locations depending on your operating system
- Windows: Control Panel > Hardware and Sound > Sound macOS: Applications> Utilities> Audio MIDI Setup See the full User Guide for more information.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>