AeoTec ZGA003 Pico Duo Switch User Guide

AeoTec ZGA003 Pico Duo Switch

Product Information

Specifications

• Product Name: Pico Duo Switch
• Model Number: ZGA003
• Languages : English / Deutsch / Spanish / French
• Power Supply : AC 230V
• Frequency / Maximum Transmitting Power: 2405MHz~2480MHz / 17.02dBm

Important Safety Information
Danger of Electrocution. This device is designed to control external lighting / appliances and operate in their housing. Faulty connection or misuse may result in fire or electric shock. All installations or modifications on this device must be performed by a qualified licensed electrician and must conform to national regulations. Even when this device is turned off, voltage may be present at its terminals. Any wiring maintenance or modifications must always be performed with voltage disconnected (disable the fuse). This device must always use the same power source for L and IN terminals.

Product Usage Instructions

1. Step 1: Switch off the power supply
   Switch off the power supply by switching off the main breaker or fuse.

2. Step 2: Connect the Pico Duo Switch
   Connect the Pico Duo Switch according to one of the following diagrams:

3. Diagram 1: Using a single toggle or momentary switch

4. Diagram 2: Using a double momentary or separate single-pole toggle switches (optional – S2 can be used for scene activation)

5. Step 3: Switch on the power supply Switch back on the power supply.

6. Step 4 : Check LED status The LED of the Pico Duo Switch should pulse slowly now.

Connecting Pico Duo Switch to Your Hub
A. Aeotec Smart Home Hub or SmartThings Hub

1. From the SmartThings dashboard, tap +.
2. Tap Add Device, then By brand.
3. Find and select Aeotec.
4. Tap Switch / Dimmer.
5. Tap Aeotec Pico Duo Switch (or Aeotec Switch / Dimmer).
6. Tap Start, then follow the remaining instructions to pair Pico Duo Switch.
7. When prompted by your hub, tap the Action Button on Pico Duo Switch twice. The LED will flash rapidly while it attempts to connect.

B. For Home Assistant, Hubitat or other Hubs
Follow the extended instructions in the QR code provided in the Extended Manual section below.

Connection LED States
If the steps were followed correctly, the LED will change from a rapid flash to one of the following LED states depending on success or failure:

• Success: LED will have a solid light based on the state of the switch output (OFF = LED off, ON = LED on).
• Fail: LED will return to fading in and out.

Default External Switch Mode
The default external switch setting utilizes a general single-pole toggle switch. To change the switch type, refer to the extended manual for instructions on configuring the Pico Duo Switch.

**FAQ

**

1. Q: Where can I find the full text of the declaration of conformity?
   A: The full text of the declaration of conformity is available at aeotec.com/support.

2. Q: Where can I find more information on device specifications and certifications?
   A: Full information on device specifications and certifications can be found at aeotec.com/support.

QUICK START GUIDE.

• Read manual before use

Technical Data

• Rated voltage: 110-230V ~ 50/60 Hz Max.
• current: 2x8A M.16
• Operating temperature: 32 – 104°F / 0-40°C Operating humidity: 8%-80%
• Radio frequency: 2.4 Ghz (Zigbee 3.0)

Important safety information.

Danger of Electrocution.

• This device is designed to control external lighting / appliances and operate in their  housing. Faulty connection or mismisuse may result in fire or electric shock. All installations or modifications on this device must be performed by a qualified licensed electrician and must conform to national regulations. Even when this device is turned off, voltage may be present at its terminals. Any wiring maintenance or modifications must be always performed with voltage disconnected(disable the fuse). This device must always use the same power source for L and IN terminals.

Caution!

• Failure to observe recommendations included in this manual may be dangerous or be a violation of the law. Make sure to check the operating/maintenance manual of the device you want to control to make sure the wiring is safe and allowed. Do not connect devices which are not compliant with the specification or relevant safety standards. Do not install the device in metal enclosures or on metal surfaces, this may considerably reduce the range of wireless operation. Do not expose this product to moisture, water or other liquids. Do not use in bathrooms and other high humidity rooms. This product is designed for indoor use only. Do not use outside. This product is not a toy, keep away from children and animals!
• Please read this and the guide(s) at aeotec.com/support carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or be
  a violation of the law. The manufacturer, importer, distributor, and/or reseller will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in other materials.

Important safety information.

1. Switch off the power supply by switch off the main breaker or fuse.

2. Connect the Pico Duo Switch according to one of the diagrams:
   Fig. 1: Using a single toggle or momentary switch
   Fig. 2: Using a double momentary or separate single-pole toggle switches (optional – S2 can be used for scene activation)

3. Switch back on the power supply.

4. The LED of the Pico Duo Switch should pulse slowly now.

Conformity.

• Simplified EU Declaration of Conformity.

  • Aeotec Limited declares that ZGA002 is in compliance with the essential requirements and other relevant provisions of the RED Directives 2014/53/EU and 2011/65/EU, 2015/863. The full text of the declaration is available at: aeotec.com/support.
  • Pico Duo Switch Frequency / Maximimum transmitting power: 2405MHz~2480MHz /17.02dBm

• Specifications
  

  •  Full information on device specifications and certifications are at aeotec.com/support.
  • Aeotec is a ® Registered Trademark of Aeotec Limited amongst other intellectual property. A non-exhaustive list can be found at aeotec.com/legal/. All rights reserved.
  • Aeotec Limited is the owner of Aeotec, the Aeotec logo, and a number of other patents and trademarks utilized by products distributed by Z-Wave Europe, Aeotec Americas and Aeotec Group.
  • Find and select Aeotec.
  • Tap Switch / Dimmer.
  • Tap Aeotec Pico Duo Switch (or Aeotec Switch / Dimmer).
  • Tap Start, then follow the remaining instructions to pair Pico Duo Switch.
  • When prompted by your hub, tap the Action Button on Pico Duo Switch twice, the LED will flash rapidly while it attempts to connect.

• For Home Assistant, Hubitat or other Hubs follow the extended instructions in the QR code below. Extended Manual:

Connection LED states.
If the steps were followed correctly, the LED will change from a rapid flash to one of these LED states depending on success or failure.

• Success: LED will have a solid light based on the state of the switch output (OFF = led off, ON = led on).
• Fail: LED will return to fading in and out.

Default External Switch Mode.

• The default external switch setting utilizes a general single-pole toggle switch. To change the switch type follow the extended manual to configure Pico Duo Switch, which link you can find by scanning the QR code in the Extended Manual section above.

Not connecting? Try these steps to reset the device;

1. Press and hold the Action Button for 10+ seconds to manually factory reset Pico Duo Switch.
2. When the LED fades in and out, the reset is successful.
3. Try connecting Pico Duo Switch again. Consider a closer
4. location temporarily for connecting it, then move it into its installation location.

Need more assistance with the Aeotec Smart Home Hub and automating your Pico Duo Switch?

• Visit aeotec.com/support/ to get more help and solutions from our knowledge base.

Gateway compatibility.

• To see if this Pico Duo Switch is known to be compatible with your ZigBee gateway, please refer to aeotec.com/compatibility.
• US Certifications
• FCC ID: 2AOGIZGA003
• Tested to Comply With FCC Standards
• FOR HOME OR OFFICE USE

• Copyright © Aeotec Limited. All rights reserved. ZGA003_ZG501000300001_AB_09

References

• Home - Aeotec
• 0 compatibility list - Aeotec
• Privacy policy - Aeotec
• Support - Aeotec
• Support - Aeotec
• Patent-list | Sipco

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>