Fitbit Charge 5 Versa 3 Health and Fitness Smartwatch User Manual
- June 15, 2024
- Fitbit
Table of Contents
EAST OAK SX-NX015 44 Inch Propane Fire Pit Table
FAQ’s
How do I put on my Fitbit device?
Wrist-based devices
For the infinity band that comes with Fitbit Charge 5, Fitbit Sense series,
Fitbit Versa 3, and Fitbit Versa 4:
Slide the bottom band through the first loop in the top band.
Tighten the band until it fits comfortably, and press the peg through one of
the holes in the band.
Slide the loose end through the second loop until it lies flat on your wrist.
For our other bands, place your device around your wrist, and fasten the
clasp. For any of our wrist-based devices, it’s important to make sure it
isn’t too tight. Wear the band loosely enough that it can move back and forth
on your wrist.
For step-by-step instructions, choose your device on the Fitbit
help site to review the user manual.
Clip-based devices
Securely clip your device with the screen facing outward to your clothing. Confirm your tracker is set to WORN on Wrist (Inspire 3) or On Wrist (Inspire and Inspire 2) when you wear your tracker on your wrist, and CLIPPED on Body (Inspire 3) or On Clip (Inspire and Inspire 2) when you wear your tracker in the clip accessory
What are some tips to make sure I wear my Fitbit device correctly?
Wrist-based devices
Wear your device on top of your wrist. For best results, the back of your device should be in contact with your skin for features like heart-rate tracking.
Make sure that your band isn’t too tight. Wear it loose enough that it can move back and forth on your wrist.
During exercise, try moving the band higher on your wrist (2-3 finger widths above your wrist bone) to get a better fit so it’s secure, but not too tight. Lower the band on your wrist and loosen it after exercise.
Take off your device on a regular basis to let your skin breathe. If you experience any discomfort or irritation, loosen the band, and if it persists give your wrist a break by taking it off for an extended time. Clean your band regularly with a soap-free cleanser (like Cetaphil). If your device gets wet, remove and dry completely after your activity.
Make sure your wrist setting in the Fitbit app matches the wrist that you wear your device on (dominant or non-dominant). For more information, see How do I change the wrist setting on my Fitbit device?
For more details, review our Wear and Care page and our Product Safety information.
Note: If you have trouble connecting to GPS on Charge 5, see How do I use GPS on my Fitbit device?
Clip-based devices
Secure the clip, with the screen facing outward, to a shirt pocket, bra, pants
pocket, belt, or waistband.
Try out a few different locations to see what’s most comfortable and secure
for you. If you experience discomfort or irritation when wearing your device
in contact with your skin, clip it to another piece of clothing, such as your
belt or pocket.
How do I care for the band on my Fitbit device?
Regularly clean your band and wrist—especially after working out or sweating.
Clean the band with a soap-free cleanser (like Cetaphil). Don’t use hand soap,
body soap, dish soap, hand sanitizers, cleaning wipes or household cleaners,
which could get trapped beneath the band and irritate your skin. Always dry
the band and your wrist well before putting it back on. We recommend that you
allow your band to air dry.
The materials used in our leather, metal, knit, or woven accessory bands are
intended to be worn during normal daily activity and not during high-intensity
workouts or sleep. In general, these bands are not water-resistant or
splashproof. They shouldn’t be soaked when cleaned; instead, dampen a cloth
with water to clean these bands. Don’t store these bands in direct sunlight,
at high temperatures or in humid conditions, as that may cause discoloration
or damage over time.
To minimize the risk of discoloration to our lighter colored and leather
bands, avoid prolonged, direct contact with dark-colored clothing, as color
transfer may occur.
How do I change the wrist setting on my Fitbit device?
Make sure your wrist setting in the Fitbit app matches the wrist you wear your device on (dominant or non-dominant).
- Tap the Today tab and tap your profile picture.
- Tap your device image.
- Tap Wrist Dominant or Non-Dominant.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>