FANMASTER PACIMD-PA Portable Evaporative Air Cooler Instruction Manual

PORTABLE EVAPORATIVE AIR COOLER – MULTI DIRECTIONAL
D.I.Y assemble kit
#PACIMD-PA
ASSEMBLY INSTRUCTIONS

WHAT’S INCLUDED

Air outlet assembly
8 x top panels
8 x support brackets
4 x bottom panels
32 x louvres
1 x fan guard| 1|
Body| 1|
Castors
(located inside body)| 4|
PopRivets/Screws/
Accessories
(located inside body)| | ![FANMASTER PACIMD PA Portable Evaporative Air Cooler

• WHAT’S INCLUDED 4](https://manuals.plus/wp-content/uploads/2023/08 /FANMASTER-PACIMD-PA-Portable-Evaporative-Air-Cooler-WHATS-INCLUDED-4.jpg)
  Control Panel +
  Enclosure
  (located inside body)| 1|
  Remote Control
  (located inside body)| 1|
  Instruction Manual
  (located inside body)| 1|

TOOLS REQUIRED

• Powered drill with Philips head bit
• Rivet gun (preferably air powered)

VIDEO INSTRUCTION

https://youtu.be/Eh-nddprlKk

WATCH ME

PRODUCT INFORMATION

https://www.fanmaster.com.au/product/portable-evaporative-air-cooler-multi- directional-diy-kit-pacimd-pa/

SCAN ME

ASSEMBLY INSTRUCTIONS

RECOMMEND 2 PERSONS FOR ASSEMBLY

1st Stage – Unpack & Locate Accessories Box:

• Remove body from the carton

• Remove side panel (with yellow label) to access inside of body.
  

• Locate box with castors, instruction manual, control panel, remote & accessories.
  

2nd Stage – Attachment of Castors

• Place down the carton or blanket on the floor
• Carefully lay the body on its side
• Attach 4 x castors with bolts & washers supplied
• Lock all 4 brake functions and lift unit into upright position.

3rd Stage – Assembly & Attachment of Air Outlet

• Locate 8 x top panels, 8 x support brackets, 4 x bottom panels, 32 x louvres & 1 x fan guard.
  

• Attach the top panels (8) using the pop rivets supplied.
  

• Attach the support brackets (8) to the top panel using the pop rivets supplied.
  

• Install the rubber grommets into the support brackets.

• Attach the louvres (32) into the air vent (8 sections).

• Attach the bottom panels (4) to the support brackets with the pop rivets supplied.

• Attach fan guard to air outlet with pop rivets & washers.
  

• Attach air outlet to body with screws provided.

4th Stage – Cabling & Connection:

• Insert control panel into enclosure bracket (locate controller cable which is the front)
• Attach enclosure bracket to body with screws supplied
• Locate cable – controller cable (black)
• Connect controller cable (black) to control panel
• Replace side panel
• Ready to plug and play.
  

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>