Mobvoi STH-3000 Foldable Treadmill for Home User Guide
- June 15, 2024
- Mobvoi
Table of Contents
Mobvoi STH-3000 Foldable Treadmill for Home
Product Information
Specifications
- Product: Treadmill
- Model: [Model Name]
- Display: [Display Type]
- Belt Type: [Belt Type]
Product Usage Instructions
Display Troubleshooting
If you encounter any issues with the display, please follow these steps:
- Ensure the power cord is securely plugged into a power outlet.
- Check if the power switch is turned on.
- If the display is still not working, try resetting it by pressing the reset button located on the back of the display unit.
- If the issue persists, please contact your seller and request a new display unit.
Running Belt Connection
The running belt plays a crucial role in the proper functioning of the treadmill. Please follow these guidelines:
- Ensure the running belt is properly aligned and centered on the treadmill deck.
- Check for any obstructions or debris on the belt or underneath it. Clean if necessary.
- Inspect the belt for any signs of wear and tear. If the belt appears damaged or worn out, it may need to be replaced.
- If everything looks fine, you can safely use the treadmill without any concerns about the running belt’s connection.
Frequently Asked Questions (FAQ)
Q: What should I do if the display is not working?
A : If the display is not working, please follow the troubleshooting steps mentioned above. If the issue persists, contact your seller for a replacement display unit.
Q: Is it normal for the running belt to be loose?
A : Yes, the running belt on every treadmill may have some degree of looseness. However, it should not be excessively loose or tight. Follow the guidelines provided above to ensure proper alignment and functioning of the running belt.
TROUBLESHOOTING STEPS
- If the treadmill belt has scratches and marks. It is normal. The belt on the running belt plays a role in connection. The running belt of every treadmill is like this, please rest assured to use it.
- Please wear a safety lock the machine will not issue abnormal reminders.
- Please contact your seller and ask them to ship you a new engine for your treadmill.
- The belt cannot be damaged. It just is belt crease, the belt on the running belt plays a role in connection.
- Please contact your seller and ask them to ship you a new plug.
- The running belt is slipping because the running belt is too loose. Please adjust the running belt. Adjust the hexagon socket screws on the left and right sides of the rear end cap, and adjust the adjustment by half-turn and half-turn clockwise. After adjusting the left side, adjust the right side.
- Please contact your seller and ask them to ship you a new remote of your treadmill.
- Please contact your seller and ask them to ship you a new accessory for your treadmill.
- It is normal for the treadmill to have a sound when it first starts up. You can add lubricating oil under the running belt and observe whether there is any abnormal noise.
- There are only three buttons on the face sticker, the number in the middle is only for display, and there is no button function.
- Adjust the hexagon socket screws on the left and right sides of the rear cover, and adjust the adjustment by half a turn and half a turn counterclockwise. After adjusting the left side, adjust the right side, and then add some lubricating oil under the running belt.
- When you receive the treadmill, you only need to turn on the treadmill and let the treadmill run for a while, and the running belt will generally automatically return to the center.
- Please contact your seller and ask them to ship you a new plug.
- Please contact your seller and ask them to ship you the correct product.
- maximum weight recommendation of 120 Kilograms.
- If there is an unpleasant smell, it may be that the small belt is skewed or adjusted too tightly. It should be loosened appropriately. It is recommended to transfer the small belt according to the following method.
- Adjust the hexagon socket screws on the left and right sides of the rear cover, and adjust the adjustment by half a turn and half a turn counterclockwise. After adjusting the left side, adjust the right side, and then add some lubricating oil under the running belt.
- Please contact your seller and ask them to ship you a new display.
- The belt on the running belt plays a role in connection. The running belt of every treadmill is like this, please rest assured to use it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>