SmarterSurfaces Smart Clear Projector Screen Paint User Guide

: June 14, 2024
: SmarterSurfaces

Table of Contents

SmarterSurfaces Smart Clear Projector Screen Paint
Specifications
APPLICATION GUIDE
HOW TO APPLY SMART CLEAR PROJECTOR SCREEN PAINT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SmarterSurfaces Smart Clear Projector Screen Paint

Specifications

Suitable for use on painted plaster, wallboards, wood, metal concrete, and composites
For interior use only
Each kit covers an area of 4.5m2 / 48 sq. ft.
Screen sizes created: 120 or 279cm x 157cm (109.8 x 61.8) – at aspect ratio 16:9
Certified gypsum Surface Finish Quality Standard of Level US 5/ EU Q4

How to Apply Smart Clear Projector Screen Paint:

Prepare the surface by ensuring it is clean, dry, and smooth.
TIP: Paint the entire wall so the area with projector paint will be less visible.
Adjust your projector color correction settings to display images correctly on your wall color.

Product Liability Clause:
The sale of our products is subject to our General Terms and Conditions available on www.smartersurfaces.com

Support:

Email: support@smartersurfaces.com
Phone (IRE): +353 1 412 6200
Website: www.smartersurfaces.com

FAQ:

Q: What surfaces can I use Smart Clear Projector Screen Paint on?
A: Smart Clear Projector Screen Paint is suitable for use on painted plaster, wallboards, wood, metal concrete, and composites.
Q: Can I use Smart Clear Projector Screen Paint on bare plaster, wood, or concrete?
A: No, Smart Clear Projector Screen Paint is designed to be applied over a painted surface or a coated material that is smooth and non-absorbent. It does not work on absorbent materials such as unpainted bare plaster, wood, or concrete.
Q: What screen sizes can I create with each kit?
A: Each kit covers an area of 4.5m2 / 48 sq. ft. and can create screen sizes of 120 or 279cm x 157cm (109.8 x 61.8) at an aspect ratio of 16:9.
Q: What projectors are compatible with Smart Clear Projector Screen Paint?
A: Smart Clear Projector Screen Paint is designed to work with interactive, HD, 4K, and standard projectors with adjustable color correction.

APPLICATION GUIDE

Smart Clear Projector Screen Paint is suitable for use on painted plaster, wallboards, wood, metal concrete, and composites.
For interior use only.
Each kit covers an area of 4.5m2 / 48 sq. ft.
This will create the following screen sizes: 120” or 279cm x 157cm (109.8” x 61.8”) – at an aspect ratio of 16:9 All products within the Smarter Surfaces Projection Range have a certified gypsum Surface Finish Quality Standard of Level US 5/ EU Q4 guaranteeing a smooth, seamless surface ready for use with a high-quality projector for professional projection results.

HOW TO APPLY SMART CLEAR PROJECTOR SCREEN PAINT

Please note this product is designed to be applied over a painted surface such as a wall or a coated material that is smooth and nonabsorbent and does not apply to an absorbent material such as unpainted bare plaster, wood, or concrete. Smart Clear Projector Screen Paint is designed to work with interactive, HD, 4K, and standard projectors with adjustable color correction. Adjust your projector color correction settings to display images correctly on your wall color.

PREPARE THE SURFACE
- All surfaces to be painted should be clean, dry, and free from loose materials.
- If the surface is new, paint the surface such as a wall in the color of your choice and allow it to fully dry.
- Measure the area you wish to paint your clear projector paint over and mark it using masking tape. The maximum dimensions this paint will cover is 279cm x 157cm (109.8” x 61.8”).
  TIP: Paint the entire wall so the area with projector paint will be less visible.
APPLY THE PROJECTOR PAINT
- Stir paint thoroughly before use.
- For best results, apply paint using a mohair or lint-free short pile roller sleeve.
- Apply 2 coats allowing the first coat to dry once applied.
- Once the first coat is dry (approx. 2-4 hours at 20°) apply the second coat.
DRYING TIME
- Smart Clear Projector Screen Paint will be touch-dry in 1 hour and usable after 24 hours.