PERRIN AND ROWE AR25WTPEG Bathroom Accessories Instruction Manual
- June 14, 2024
- PERRIN AND ROWE
Table of Contents
PERRIN AND ROWE AR25WTPEG Bathroom Accessories
Product Information
Specifications:
- Product Type : Bath Accessories
- Recommended Tools : Drill, Level, Cruciforme Screwdriver
- Accessories Included : Anchors Sleeve, Self Tapping Screws, Mounting Plate, Accessory, Grub Screws, Hex Wrench
Product Usage Instructions
Identify Installation Wall Location
Once you have identified the desired installation wall location, follow the
steps below to install the bath accessory:
- Place the Mounting Plate (C) flush against the wall at the desired location.
- Mark the hole locations on the wall using a pencil or marker.
Mounting Options
The screws and anchors supplied with the product are specifically designed
for drywall installation. However, depending on your installation
requirements, you may need to consider other mounting options.
Installation Steps
Follow the steps below to install the bath accessory:
- If you are installing a towel bar, you will need only 1 self-tapping screw per mounting plate.
- If you are installing a robe hook, ensure that the grub screw is facing upwards during installation.
- Use the provided screws and anchors to secure the accessory to the wall.
- Tighten any grub screws using the hex wrench (F) provided.
FAQ (Frequently Asked Questions):
What tools do I need for installation?
We recommend using a drill, level, and a cruciform screwdriver for the
installation process.
Can I use the supplied screws and anchors for other types of walls?
The screws and anchors supplied are specifically designed for drywall
installation. If you have a different type of wall, you may need to consider
other mounting options.
Where can I find warranty or additional information?
For warranty or additional information, please contact our customer
support:
- US Customers – houseofrohl.com/support or call 1-800-777-9762
- Canadian Customers – houseofrohl.ca/support or call 1-866-473-8442 (Canada) or 1-800-287-5354 (Ontario)
Bath Accessories
HELPFUL TOOLS
For safety and ease of installation, the use of these helpful tools is
recommended.
Parts List
- A. Anchors Sleeve *
- B. Self Tapping Screws
- C. Mounting Plate *
- D. Accessory
- E. Grub Screws *
- F. Hex Wrench
*Qty. (x1) or (x2) as varies by product type
**Installation Notes
**
If installing the towel bar, only 1 self tapping screw is required per mounting plate. If installing the robe hook, the grub screw is installed facing upwards. Screws and anchors supplied are for drywall installation. Your installation may require other mounting options.
- Once desired installation wall location is identified, place the Mounting Plate (C) flush against wall and mark the hole locations. Screws and anchors supplied are for drywall installation. Your installation may require other mounting options.
- Drill pilot holes for the mounting plate. Use 1/4″, 6mm drill bit size.
- Insert Anchor Sleeves (A) into drilled holes until flush with finished wall surface.
- While holding Mounting Plate (C) over the installed anchors, secure plate with Self Tapping Screws (B) until plate is firmly installed.
- Install Bath Accessory (D) onto Mounting Plate (C) until flush
- Using a hex wrench, secure Bath Accessory (D) with Grub Screws (E). Installation is complete.with the mounting plate.
For warranty or additional information, contact
US Customers
U.S.A. houseofrohl.com/support
1-800-777-9762
Canadian Customers
ONTARIO houseofrohl.ca/support
1-800-287-5354
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>