FOSCAM T8EP IP 4K 8MP Outdoor POE IP Security Camera User Manual

User Manual

Foscam 4K/8MP Outdoor

POE IP Security Camera

Model: T8EP

V1.1

1 Overview

1.1 Key Features

• 8MP UHD Waterproof IP Camera
• H.264+/H.264 video Compression
• Supports Human detection, Motion Detection and Vehicle Detection
• Compatible with free Foscam Video Management Software
• Compatible with free Foscam iOS and Android APP
• Supports PoE Function
• Supports Full Duplex two-way Audio
• Supports HDR
• Supports 256GB Micro SD Card storage(External)
• Night Vision Range up to 20m(66 feet)
• P2P Feature for Easy Remote Access
• Supports image snapshot
• Supports dual-stream
• Supports remote viewing & record from anywhere anytime
• Multi-level users management with password protection
• Supports multiple network protocols: IP, TCP, UDP, SMTP, FTP, DHCP, RTSP
• Supports Alexa
• Supports Google Home

1.2 PoE

The Network Camera is PoE-compliant, allowing transmission of power and data via a single Ethernet cable. Such as the following picture: connect the Network Camera to a PoE-enabled router / switch via Ethernet cable.

A: Router
B: WiFi
C: POE Switch or POE NVR

1.3 Read before Use

Please first verify that all contents received are complete according to the Package Contents listed below. Before the Network Camera is installed, please carefully read and follow the instructions in the Quick Setup Guide to avoid damage due to faulty assembly and installation. This also ensures the product is used properly as intended.

1.4 Packing Contents

1.5 Physical Description

1.5.1 Front Panel

1. Power

2. LAN

3. Anti-theft screw

4. Spotlight & Infrared LED

5. Lens

6. Microphone

7. Spotlight & Infrared LED

8. Light Sensor

9. Speaker

10. Reset

11. Micro SD Card Slot

12. Anti-theft screw

1.5.2 Interface

1. LAN
10/100M adaptive Ethernet interface. Through this interface, IP camera can be connected with various network devices, such as hub, router, etc.

2. Power Interface
Connect the external power adapter, request for 12V / 1A power.

1.6 SD Card Management

This camera supports Micro SD Card.
When you plug in the SD card during the camera work process, please reboot the camera again, or else the SD card might not work well.
On Foscam app go to the Settings→Device Status→Device Status page, you can see the SD card status.

1.7 Add Device: Connection via the Foscam App

Scan the QR code below to download and install the Foscam APP.

Please refer to the Quick Setup Guide.

1.8 Installation

Please refer to the Quick Setup Guide.

1. Loosen the anti-theft screws, and rotate the shell and base in opposite direction until point a and b are aligned to remove the shell.
2. Screw ox001D the micro SD cover and Insert a micro SD into the SD card slot. (If you don’t want to use SD card for storage, skip this step).

A: Remove
B: Insert
C: Rotate

3. Install the sticker for positioning in the needed area.

4. Install the base of the device on the surface with proper expansion screws as below.

Cement Wall                          Wooden Wall

5. Assemble back the camera and shell, rotate the base and the shell to make point a and b staggered, then fix them by tightening the anti-theft screws.
6. Set the camera to needed viewing angle.

A: Ceiling or wall
B: Base
C: Sphere
D: Cover
E: Rotate
F: Set viewing angle

1.9 Waterproof Lid Installation Guide

When mounting your PoE camera outdoors, you are suggested to install the waterproof lid for it. You may follow the steps for installation.

1. Thread the Ethernet cable through the top cover and then the waterproof connector.

A: Ethernet Cable End
B: Waterproof Connector
C: Top Cover

2. Put the rubber seal ring around the Ethernet cable between the top cover and the waterproof connector.

A: Ethernet Coble End
B: Rubber Seal Ring

Note: The rubber seal ring provided has been cut. If not, you may manually cut it.
3. Put on the rubber O-ring to the Ethernet port of the camera and plug the Ethernet cable into the Ethernet port.

A: Ethernet Port
B: Ethernet Cable End
C: PoE Camera End
D: Rubber O-Ring

4. Align the waterproof connector with the Ethernet port, then twist it clockwise to tighten the two parts.

A: Waterproof Connector

5. Push the rubber seal ring into the waterproof connector, then screw the top cover and lock it into position firmly to finish installation.

A: Rubber Seal Ring

2 Default Parameters

Default network parameters
IP address: obtain dynamically
Subnet mask: obtain dynamically
Gateway: obtain dynamically

3 Specification

| ITEMS| T8EP
---|---|---
Spotlight| Color Temperature| 4500K
Image Sensor| Sensor Type| High Definition Color CMOS Sensor
Display Resolution| Resolution 8.0Megapixels(38402160)
Min. Illumination| 0 Lux (With IR Illuminator)
Lens| Lens Type| f:4.3mm; F1.6
Angle of view| Diagonal: 108.5°, Horizontal: 90.1°, Vertical 46.2°
Video| Image Compression| H.264+/H.264
Resolution| 4K(38402160) 6M/20 fps,1080P(19201080)1M/25fps, 720P(1280720)1M/15fps
Stream| Dual stream
Image Adjustment| The hue, brightness, contrast, saturation, sharpness are adjustable
Flip Image| flip and mirror
Night Mode| Manual and automatic modes, when the white light is on, the night vision image is colored
Night Visibility| With 4pcs IR-LED and spotlight, Night Vision Range up to 20m
Audio| Input/Output| Built-in mic and speaker, supports full duplex 2-way Audio
Audio Compression| PCM/AAC
Siren| Support maximum 100dB alarm siren
Network| Ethernet| One 10/100Mbps RJ45 port
Remote Access| P2P
Network Protocol| IP, TCP, UDP, SMTP, FTP, DHCP, RTSP
System Requirements| Operating System| Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android (Foscam app), iOS (Foscam app)
Other Features| Motion Detection| Alarm via E-Mail, upload alarm snapshot to FTP
Human Detection| Alarm via E-Mail, upload alarm snapshot to FTP
Vehicle Detection| Alarm via E-Mail, upload alarm snapshot to FTP
User Accounts| Three levels user role
WDR| Improve image clarity in complex scenario
Zoom| 6X digital zoom function
Storage| Support max. 256GB Micro SD card, local and FTP storage, Foscam cloud storage
Reset| Reset button is available
Intelligent Assistant| Supports Alexa, Google Assistant
Power| Power Supply| DC 12V/1.0A (Not standard)
POE Standard| 802.3af
Power Consumption| 5 Watts (Max.)
Physical| Dimension(LxWxH)| φ110*100mm
Net Weight| 380g
Environment| Waterproof| IP66
Operating Temperature| -20°C ~ 40°C (-4°F ~ 104°F)
Operating Humidity| 10% ~ 80% non-condensing
Storage Temperature| -20°C ~ 50°C (-4°F ~ 122°F)
Storage Humidity| 0% ~ 90% non-condensing
Certification| FCC, CE, RoHS, IP66, UKCA

For other parts, please refer to the “FOSCAM Camera User Manual”

Documents / Resources

| FOSCAM T8EP IP 4K 8MP Outdoor POE IP Security Camera [pdf] User Manual
T8EP IP 4K 8MP Outdoor POE IP Security Camera, T8EP, IP 4K 8MP Outdoor POE IP Security Camera, Outdoor POE IP Security Camera, IP Security Camera, Security Camera, Camera
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>