LION ENERGY 50170124 Summit Bluetooth Portable Generator User Manual

June 14, 2024
Lion Energy

LION ENERGY 50170124 Summit Bluetooth Portable Generator User Manual
LION ENERGY 50170124 Summit Bluetooth Portable
Generator

READ THIS MANUAL IN ITS ENTIRETY BEFORE OPERATING THE LION SUMMIT.

The Lion Summit provides safe, silent, and renewable electric power. The Lion Summit is useful in emergencies, and for work and play. It is very important to read the entire user manual before using the product.

Carefully read and strictly follow these safety rules:

  • For better performance, fully charge the Lion Summit before using it.

  • Do notinsert fingers or hands into any of the Lion Summit’s outlets.

  • Only use the recommended Lion Energy™ accessories.
    Do not use the Lion Summit if the cables or charging adapters show signs of damage.

  • Never try to alter the Lion Summit, cables, or accessories.
    Do not allow water to contact the Lion Summit or immerse it in water.

  • Do not run the Lion Summit in the presence of flammable liquids, gases, or excess dust.
    Do not expose or store the Lion Summit to excessive heat (above 115 ° F).

  • Do not leave the Lion Summit out in direct sunlight in higher temperatures. Store the Lion Summit at temperatures from 14° to 115° F (ideally, 32°-86° F)

  • Charge at temperatures ranging from 32°to 115° F.
    Never charge a frozen Lion Summit. Let it warm up above freezing before charging.

  • Never leave the Lion Summit unattended while charging.

Package Contents

Lion Summit: 1 pc DC
Charging Cable: 1 pc
Wall Charger Adapter (150W): 1 pc

Parts Identification

Product Overview

| Part| Description
---|---|---
1| Main Power Switch| Turns the Lion Summit display on or off by pressing and holding for several seconds
2| LCD Screen| Displays charge / discharge time at the interval of 0.1 hours. 10 bars = fully charged
3| Input Charging Port| Where the solar, auto, and wall charger are plugged in to charge the Lion Summit
4| AC Output ON / OFF Button| Turns the AC ports on or off
5| AC Output Outlet| Supplies AC output from the outlet
6| USB-A, USB-C and USB-PD Output| Charges USB Device
7| 12 Output Socket| Supplies DC power from the socket
8| DC Output ON / OFF Button| Turns the DC ports on or off
9| Carry Handle| Used to carry the Lion Summit

Frequently Asked Questions

Q: What devices can the Lion Summit power?

A: The Lion Summit can power various things like lights, cell phones, laptops and more. The energy consumption of each device is measured in watts. The Lion Summit can power devices that need a total of 530W or less. It can power multiple devices at the same time if the total power usage for all the devices combined is 530W or less.

Q: How long will the Lion Summit last or run / power a device?

A: It depends on the energy consumption or watt usage of the device; the lower the device's wattage, the longer the Lion Summit can power it. To estimate how long the Lion Summit could power a specific device, use this formula: Watt Hours / Watts = Estimated Run Time. For instance, if the device you want to power uses 45W and the Lion Summit has a 665Wh capacity, then the estimated run time would be: 665Wh divided by 45W = 14.78 hours.

Q:Is the DC 12V socket regulated?

A: The Lion Summit does not have a regulated 12V DC output. However, since this model uses LiFeP04, instead of NMC, this gives a more stable and consistent 12.8V output.

Q: What if | forget to turn off the Lion Summit after | use it?

A: The Lion Summit will automatically turn itself off to conserve energy if there is nothing plugged in / drawing energy.

Q: Do | have to use Lion Energy solar panels?

A: You can use other 12V solar panels with the Lion Summit. However, if the panels do not have an Anderson™ compatible connection on the solar panel cable, you will need to find and buy an adapter with an Anderson™ connector.

Q: How many solar panels can | connect to the Lion Summit, so it charges

more quickly?

A: The Lion Summit's MPPT solar charge controller is rated for 150W of solar energy. If using multiple solar panels, we recommend using 12V panels with the same wattage (100W+100W or 50W-+50W +50W, not 100W+50W)

Troubleshooting

Q: What if | can’t power my AC or DC devices after | turn on the Lion Summit?
A: Make sure the AC or DC on / off button is turned on. Remember, devices that require more than 530W cannot be powered by the Lion Summit.
Q: Why can’t | turn my Lion Summit on?
A: If you have not used the Lion Summit for some time, you may need to recharge the Lion Summit before you can use it.
Q: The wall charger gets hot while charging the Lion Summit. Is anything wrong?
A: The wall charger for the Lion Summit is safety certified. The charger may get warm, this is normal. Please have the charger in the open air and not under anything like blankets or clothes.
Q: What does the Lion Summit display normally show when the Lion Summit is charging?
A: When charging the Lion Summit using DC or AC or with solar panels in strong direct sunlight, the display can show the following information:
How to charge the Lion Summit

Q: What does the Lion Summit display show while being charged with little or weak sunlight?
A: When you charge the Lion Summit with a solar panel under very weak sunlight, the display may show:
How to charge the Lion Summit

When solar power is too weak to charge the Lion Summit, the display will not show any watts in. Cloudy days, shade and sunlight through a window provides too low of input, this is normal. You may need to charge in stronger sunlight or by AC or DC power.

Battery Safety

The Lion Summit includes over-voltage, low-voltage, overload, short-circuit, and over- temperature protections. It also has built-in visual and audio alarms. For instance, the Lion Summit will chirp and have a blinking red light on the screen if a device that uses too much power, is plugged in, or if the Lion Summit becomes too hot and needs to cool down. Waiting and/ or shutting the Lion Summit off and back on will resolve most errors. The overload circuitry protects against damage to the Lion Summit and also serves as a safety measure for anyone using the Lion Summit.

Mechanical Design (inches)

Dimension

Charging Method Charging Time
SOW Solar Panel Charging time depends on the directness and brightness of

sunlight, usually 8-12 hours
T00W Solar Panel| Charging time depends on the directness and brightness of sunlight, usually 4-6 hours
Wall Charger| 45 Hours
12V DC Socket| 4.57 Hours

Technical Specifications

AC Charging Input Voltage

1 Input Voltage Range 100 ~ 240V

Solar Charging Input

1 Input Voltage Range 13~22v
2 Max Input Current 10A
3 Input Wattage 150W

2x USB-A Output

1 Output Voltage 5V
2 Output Current 2.4A (Max)
3 Output Overcurrent Protection 2.7A
4 Output Short Circuit Protection and Disconnection Load Recovery YES

2x USB-C Output (QC3.0 and PD)

1 Output Voltage Range 5V/9V/12V/15V/ 20V
2 Output Current 3A/3A/3A/3A/3A
3 Output Overcurrent Protection 3A
4 Output Short Circuit Protection and Disconnection Load Recovery YES

12V Socket

1 Max Output 12, 10A
2 DC Output Short Circuit Protection Yes (Disconnect load recovery)
3 DC Output Overcurrent Protection Yes (Disconnect load recovery)

Battery Type

1 Lithium Iron Phosphate LiFePO4

Inverter Power Supply

1 Rated Output Voltage / Frequency 120V AC 60Hz
2 Rated Output Power 530W Continuous
3 Inverter Efficiency 90%
4 Output Wave Pure Sine Wave

Environment

1 Working Temperature 32°F – 104°F
2 Storage Temperature Room Temperature (14°F – 113°F)
4 Cooling Method Active (Powered Fans)

Weight

1 Weight 181BS

Connectivity

1 Bluetooth Visitmyapp.LionEnergy.com

Maintenance Instructions

  • Charge the Lion Summit after each use to ensure you have power whenever needed.
  • Never completely discharge the Lion Summit to help maintain battery lifespan
  • Useadry cloth to wipe away any dirt or other debris from the Lion Summit’s surface and battery cords.
  • Do not open the Lion Summit as there are no user-serviceable parts. Any servicing should be performed by Lion Energy personnel.

Storage Instructions

  • Charge the Lion Summit to full capacity before storing it.
  • Store this Lion Summit at room temperature.
  • Forbest results, use and recharge at least once every 6 months. This helps maintain the Lion Summits battery lifespan.

Recycling

This item contains a lithium iron phosphate battery, please recycle properly.

Copyright

This material is copyrighted under US Federal Law. No part of this publication is reproducible—in any form or by any means, electronic or mechanical, including photocopying—without express written permission from Lion Energy.

Lion Energy reserves all rights to make technical modifications without advance notice, and to improve machine and safety standards.

This manual is for the purpose of supplying information, specifications, and usage instructions. All statements, information, and suggestions within this manual do not constitute any express or implied warranty.

Warranty Claims

For warranty issues, contact Customer Service at 1-385-375-8191. Do not ship your Lion Summit until you receive a return merchandise authorization (RMA) number. Lion Energy will not be responsible for any shipping or handling damage. Often, replacements are not sent until the original Lion Summit is en-route to our warehouse.

Limited Warranty
This Lion Summit comes with a one-year limited warranty from defects in materials and workmanship. Save your proof of purchase, such as a dated receipt, to show warranty period. Without a dated receipt, we will use the manufacturing dated code. Lion Energy will repair or replace the Lion Summit at their discretion.

This warranty is invalidated if any of the following occurs, but not limited to:

  • Failure to follow the instructions in the User’s Manual.
  • Accidental or unreasonable use, misuse or mishandling.
  • Overcharging or overloading.
  • Extended storage without recharging.
  • Repairs by an unauthorized person or any modification.

This warranty is in lieu of other expressed warranties. Lion Energy will not be liable for consequential or incidental damages. Changes or modifications not expressly approved by Lion Energy could void the user’s authority to run the Lion Summit.

NOTE: The Lion Summit has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. The Lion Summit may cause harmful interference, and
  2. the Lion Summit must accept any interference received, including interference that may cause undesired operation.

These limits are designed to supply reasonable protection against harmful interference in a residential installation. The Lion Summit generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the Lion Summit does cause harmful interference to radio or television reception, which can be decided by turning the Lion Summit off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the Lion Summit and receiver.
  • Connect the Lion Summit into an outlet on a circuit different from that of the receiver.
  • Consult the dealer or an experienced radio / TV technician for help.

Service Address

Lion Energy
735 S. Auto Mall Drive Suite 200
American Fork, UT 84003

Website: www.LionEnergy.com
Email : [email protected]
Telephone : 1-385-375-8191

Warranty Information

Serial Number:
Purchase Date:

385.375.8191 Monday – Friday 9:00 AM – 5:00 PM MST

735 S. Auto Mall Drive Suite 200 American Fork, UT 84003

 [email protected]
www.LionEnergy.com

LION ENERGY Logo

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Lion Energy User Manuals

Related Manuals