Ruidla 5423V Fabric Shaver Defuzzer User Manual
- June 14, 2024
- Ruidla
Table of Contents
Ruidla 5423V Fabric Shaver Defuzzer
Read all instructions carefully before using this item
Product structure
- Protective cover
- Mesh
- Blade
- Blade bin
- Switch
- Indicator light
- Charging port
- Lint collection
Using Methods
Charging
- Charging in a 5-35 degree environment.
- Use the power cable connect USB port or 5V adapter(fig.1 ).
- When lint remover is charging, the light is red. Charging time is about 8 hours.
Do not use beyond 5V adapter charging which will hurt this product. For
extended service life, please disconnect power after full charged.
Operating Turn on the switch(FIG.2)
Efficiency of the device and the result of the
fabric repair(fig.3)
- When the efficiency of the device becomes low, open the screen cover anti-clockwise the carefully take out the cutting blade, then clean the blade and also the inner compartment of the device using a soft brush.
- Please clean the product after you used up. ft The appliance’s package is made from
environmentally friendly material and can be disposed of at your local recycling plant.
Clean and maintain
- Please ensure the product switch closed
- Take off the lint container and use the brush clean it(fig.1 ).
- Take off the mesh, please hold the blade between the plastic area, not on the blades to remove them.(fig.2.3).
Product specifications
- Fully charged time
- 8-10 hours
- Battery life
- 500 times full charge
- Rated voltage and power
- 2,4 V/3W
- Charging voltage
- 5V
- Charging cable
- 40cm
- Item size
- 80 68 143 mm
- Item weight
- 0,22 kg
Precautions
- This product is not a toy and should be kept out of the reach of children.
- This device is equipped with sharp cutting blade, DE do not use it to shave your hair or skin tp prevent FR cut and damage to your skin.
- Do not operate this device for more than 30 minute to prevent damage to the motor.
- Please tuck in exposed thread before you shave JP your woolen sweater or other fabrics to prevent damage to the fabrics.
- Do not use this device to shave easily damaged fabrics like Angolan.
- An intricate design or pattern on some fabrics may disappear during the process of shaving
- Use only damp cloth to clean the surface; do not allow water or other liquids to enter the inner part of the device.
- Do not drop or strike hard.
- Do not expose to extremes heat or moisture (including wet cloths).
- Do not continuously charge 12 hours.
WELCOME TO CONTACT US
- Service mailbox : averybaronkhy@yahoo.com
Use contrast
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>