milwaukee M12 UCL M12 Undercarriage Light Instructions

: June 6, 2024
: Milwaukee

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS
FUNCTIONAL DESCRIPTION
SPECIFICATIONS
ASSEMBLY
OPERATION
MAINTENANCE
ACCESSORIES
WARRANTY – AUSTRALIA and NEW ZEALAND
SERVICE – AUSTRALIA and NEW ZEALAND
Documents / Resources

milwaukee M12 UCL M12 Undercarriage Light Instructions

IMPORTANT SAFETY INSTRUCTIONS

WARNING READ AND UNDERSTAND ALL INSTRUCTIONS.

When using electric appliances, basic precautions should always be followed, including the following: -Before using, read this operator’s manual, your battery pack and charger operator’s manual, and all labels on the battery pack, charger and light. Learn your light’s applications and limitations as well as potential hazards associated with this type of tool.

Read and understand all the instructions before using the appliance.
To reduce the risk of injury, close supervision is necessary when an appliance is used near children.
Store idle light out of reach of children. Warm lights can become hazardous in the hands of children.
Do not store light by the magnetic storage tray.
Remove light from undercarriage before operating a vehicle. A light left attached to the undercarriage may break free which could result in personal injury. -Store indoors. Do not expose to rain.
Batteries must be recharged only with the charger specified by the manufacturer. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.
Use light only with specifically designated battery pack. Use of any other batteries may create a risk of fire.
When battery pack is not in use, keep it away from met-al objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire.
Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE’ service facility for a replacement.
SAVE THESE INSTRUCTIONS

FUNCTIONAL DESCRIPTION

Fuel gauge
Mode button
Power button
Light head
Light head handle
Magnetic storage tray
Magnetic base
Battery bay

ADDITIONAL BATTERY SAFETY RULES

WARNING
To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.
WARNING Do not charge non-rechargeable batteries

| Volts
---|---
| Direct Current
| Read Operator’s Manual
| Magnet
| Pinch Hazard – Keep hands out of pinch zone
| Class III protection
| Do not stare at light source.
| The product was only suitable for indoor use. Never expose the product to rain.
| Regulatory Compliance Mark (RCM). This product meets applicable regulatory requirements.
| Do not dispose of electric tools together with household waste material. Electric tools and electronic equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility

SPECIFICATIONS

Cat. No: M12 UCL
Light Output
High: 1,200 Lumens
Medium: 800 Lumens
Low: 600 Lumens
Battery Type: M12™
Charger Type: M12™
DC Input Volts: 12V
Max DC Input Amps: 0.8A
Recommended Ambient
Operating Temperature: -17°C to 51°C

ASSEMBLY

WARNING
Recharge only with the charger spec-ified for the battery. For specific charging instructions, read the operator’s manual supplied with your charger and battery.

Inserting/Removing the Battery
To remove the battery, push in the release buttons and pull the battery pack away from the tool.

WARNING
Always remove the battery pack any time the tool is not in use. To insert the battery, slide the pack into the body of the tool. Make sure it latches securely into place.

OPERATION

WARNING To reduce the risk look directly into the light when the of injury, do not light is on.
To turn on the light, press the Power button . Press the MODE button to cycle through High, Medium and Low settings. To turn the light, press the Power button again. Use the magnetic storage to store nuts and bolts.

MAINTENANCE

To reduce the risk of injury, always unplug the charger and remove the battery pack from the charger or tool before performing any maintenance. Never disassemble the tool, battery pack or charger. Contact a MILWAUKEE® service facility for ALL repairs.

Maintain Light
Keep your light, battery pack and charger in good repair by adopting a regular maintenance program. If the light does not work properly, return the light to a MILWAUKEE® service facility for repairs.

WARNING The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.

Cleaning
Keep tool handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean the tool, battery pack and charger since certain cleaning agents and sol- vents are harmful to plastics and other insulated parts. Some of these include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detergents containing ammonia. Never use flammable or combustible solvents around tools.

ACCESSORIES

WARNING

Use only recommended accessories. Others may be hazardous.
For a complete listing of accessories, go online to www.milwaukeetool.com.au /www.milwaukeetool.co.nz or contact a distributor.

WARRANTY – AUSTRALIA and NEW ZEALAND

Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold by authorised dealers in Australia and New Zealand.

SERVICE – AUSTRALIA and NEW ZEALAND

MILWAUKEE® prides itself in producing a premium quality product that is Nothing But Heavy DutyTM.
Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.
For a list of MILWAUKEE® dealers, guarantee or service agents please contact MILWAUKEE®
Customer Service or visit our website.
(Australia Toll Free Telephone Number 1300 645 928)

(New Zealand Toll Free Telephone Number 0800 645 928) or visit milwaukeetool.com.au/milwaukeetool.co.nz.

Milwaukee Electric Tool Corporation
13135 West Lisbon Road, Brookfield, Wisconsin U.S.A. 53005

Milwaukee Tool (Australia)
21 Kelletts Road, Rowville, VIC 3178

Melbourne, Australia
Milwaukee Tool (New Zealand)
274 Church Street, Penrose,
Auckland, 1061, New Zealand
DESIGNED BY MILWAUKEE ELECTRIC TOOL CORP. PROFESSIONALLY MADE IN CHINA PRINTED IN CHINA