AutoSky WCPAA-2 Wireless USB Adaptor User Manual
- June 3, 2024
- AutoSky
Table of Contents
AutoSky WCPAA-2 Wireless USB Adaptor User Manual
Version Update Description
After Connecting to wireless Car Play, scan this QR code with camera or enter
192.168.2.1 in safari to update firmware.
****
Note: That Some head units cut off the power to the USB adapter while
updating and leaving the process stuck at 1%. If this is the case please
connect supply, such as a computer port.
Must Connect To WIFI if you need to connect to a constant power supply
using the password: 88888888
Note: YOu need an iphone and open mobile data function to update the
firmware.
Troubleshooting Your USB Adapter
Scan this QR code in order to help you.
Product function introduction
Your Auto Sky box is designed to convert wired built-in Car Play to wireless Car play or Android Auto. Compatible vehicles & devices
Most vehicles with built-in Car Play.
Iphone 6 and later models, smartphones with Android 11 or newer with 5GHz Wi-
Fi Frequency Band; Google: Pixel /XL, Pixel 2/2 XL, Pixel 3/3 XL/3a/3a XL,
Pixel 4/4 XL/4a, Pixel 5, Pixel
6/6 Pro, Nexus 5X, Nexus 6P; and Samsung: Galaxy S8/S8+, S9/S9+, S20/S20+/S20
Ultra, S21/S21+/S21 Ultra.
General instructions
Plug the device into the vehicle’s USB port usually marked with CarPlay or smartphone icon, select the CarPlay in the original car radio system, you will be redirected to the following interface:
Product specifications
- Input Power: USB 5V
- Connectivity: WiFi & Bluetooth
How to use Wireless Android Auto
Before using Android Auto, please make sure you have the latest Android Auto App installed.
-
Enable “Wireless Android Auto” in Android Auto settings
-
Turn on Wi-Fi and Bluetooth, search on Bluetooth “AutoSkyBox-xxxxxx” and tap to pair
-
It will connect wirelessly to Android Auto automatically.
How to use Wireless CarPlay
- Turn on your iPhone’s WiFi and Bluetooth, then pair to the Bluetooth named “Auto Sky Box-xxxx”
- Tap Pair -> Allow -> Use CarPlay on the pop-up windows
- It will connect wirelessly to CarPlay automatically.
Note: Before paring to a new iPhone / Android smartphone, please disconnect the currently connected phone from WiFi and Bluetooth.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, macaques harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body