Qualdout Metal Solar Post Lights Outdoor Instruction Manual
- June 15, 2024
- Qualdout
Table of Contents
Qualdout Metal Solar Post Lights Outdoor
PRODUCT INFORMATION
SOLAR POST CAP LIGHT
READ THE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND INSTALLATION
IMPORTANT : DOUBLE CHECK CONTENTS BEFORE DISCARDING THE PACKAGING TO PREVENT LOSING PARTS THAT ARE NEEDED FOR ASSEMBLY
SPECIFICATION
| Brand | Qualdout |
|---|---|
| Color | Copper |
| Material | Metal |
| Style | Modern |
| Light fixture form | Sconce |
PARTS LIST
CHARGING AND OPERATION
- Press the button which is located underneath of part “A” to the “ON” position for charging. Charge the solar product by placing it under direct sunlight for at least 8 hours. Recommend longer charging time for first-time use.
- The light will work automatically. It will automatically charge under direct sunlight during the day time and illuminate at night.
NOTE : In order to verify that the button is correctly in the “ON” position, cover the solar panel with your hand and the light should turn “ON” automatically.
ASSEMBLY INSTRUCTION
REPLACING THE BATTERY
- Step 1: Remove the screws to open the battery cover.
- Step 2 :Remove the old battery and replace it with a new 1.2V AA(14500) NI-MH battery
- Step 3: Close battery cover and tight up the screw, TO make sure the solar light is fully charged on the sunny day
WARNING:
- Do not throw the battery in the waste stream or fire as it may explode.
- Do dispose of batteries in accordance with Local, State, and Federal regulations.
- Do not change each electronic part as a toy except to replace the battery.
- Do not mix Old and new batteries. Do not mix alkaline, standard (carbon—zinc), or rechargeable (NI-CD/NI-MH) batteries.
Read User Manual Online (PDF format)
Loading......