nordlux MIB LED Wall Light Instruction Manual
- June 14, 2024
- nordlux
Table of Contents
nordlux MIB LED Wall Light
Product Information
The MIB is a lamp that is designed for indoor use only. It has an IP20 rating, which means it is protected against solid objects greater than 12mm in size and does not provide protection against water. The lamp is suitable for installation in areas where direct contact with water cannot occur. It is available in various languages such as English, Italian, Finnish, Polish, Croatian, Estonian, Latvian, Lithuanian, Romanian, Slovenian, Greek, Russian, Danish, Norwegian, Dutch, German, French, and Turkish.
Specifications
- Product Name: MIB
- IP Rating: IP20
- Languages: English, Italian, Finnish, Polish, Croatian, Estonian, Latvian, Lithuanian, Romanian, Slovenian, Greek, Russian, Danish, Norwegian, Dutch, German, French, Turkish
Product Usage Instructions
Installation
Before starting the installation process, make sure to turn off the power
supply. In some countries, electrical installations should only be carried out
by a qualified electrician. Contact the local authorities for advice.
Mounting
The lamp is designed for direct and fixed mounting to the mains. Follow the
provided mounting instructions and do not discard them.
Maximum Wattage
Do not exceed the maximum wattage specified for the lamp. The maximum
wattage may vary depending on the language version of the manual. Make sure to
check the specific wattage value mentioned in your manual.
FAQ
-
Q: Can I install the lamp in areas with direct contact with water?
A: No, the lamp should only be installed in areas where direct contact with water cannot occur. It has an IP20 rating, which does not provide protection against water. -
Q: What languages is the product manual available in?
A: The product manual is available in English, Italian, Finnish, Polish, Croatian, Estonian, Latvian, Lithuanian, Romanian, Slovenian, Greek, Russian, Danish, Norwegian, Dutch, German, French, and Turkish. -
Q: Can I exceed the maximum wattage specified for the lamp?
A: No, it is important not to exceed the maximum wattage specified for the lamp. Make sure to check the wattage value mentioned in your specific language version of the manual.
Mounting instruction
SYMBOLS
- IP20: The lamp should only be installed in areas where direct contact with water cannot occur.
- Class I: The lamp has an earth terminal and must be connected to the yellow/green earth wire.
- The lamp is only suitable for connecting directly to the mains.
- Do not exceed the maximum wattage.
- The mounting instruction must not be discarded.
- IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries, electrical installation work may only be carried out by an authorized electrical contractor. Contact your local electricity authority for advice
www.nordlux.com
Nordlux AS – Karlskogavej 8 – DK-9200 Aalborg SV