SOUNDPEATS DD032 Life Classic Wireless Earbuds User Guide
- June 14, 2024
- SoundPEATS
Table of Contents
SOUNDPEATS DD032 Life Classic Wireless Earbuds
Product Information
Specifications
- Product Name: Life classic
- Model: 018-220385
- FCC ID: 2AFTU-DD032
- IC ID: 27785-YK004
- Manufacturer: Shenzhen SoundSOUL Information Technology Company Limited
- Address: Room 1308-1309, Building B, Huihai Square, Chuangye Road, Longhua District, Shenzhen, China. 518109
- Email: support@soundpeats.com
- Website: www.soundpeats.com
- EC REP: UK REP – TANMET INT’L BUSINESS LTD, 9 Pantygraigwen Road, Pontypridd, Mid Glamorgan, CF37 2RR, UK
- Email: tanmetbiz@outlook.com
Product Usage Instructions
Pairing
The following steps outline how to pair the SOUNDPEATS Life
classic wireless earbuds:
- Open the charging case cover. The left and right earphones will automatically turn on and enter the mutual pairing state. When the white light in the right earphone flashes slowly and the white light in the left earphone is always on, the two earphones are successfully paired. They are now in pairing mode.
- Turn on your device’s Bluetooth and select SOUNDPEATS Life classic from the Bluetooth list to complete the pairing.
Reset
To reset the earphones, follow these steps:
- Place the earphones back into the charging case, making sure they are correctly placed.
- With the case lid open, press and hold the button on the bottom of the charging case for 10 seconds until the bottom red light and white light flash twice alternately. This indicates that the earphones have been successfully activated.
Wearing Methods
To wear the earphones comfortably, follow these steps:
- Identify the left earphone and the right earphone.
- Adjust the earphones to fit your ears and find the most comfortable position.
Product Diagram
Control
Power On| Auto: Open the charging case; the earphones turn on automatically
Manually: Press and hold the multifunctional button for 1.5s, with earphones o
---|---
Power o| Auto：
1. Place the earphones back into the charging case and close the case lid
2. Earphones turn o automatically within ve minutes of power on without connection
Manually: Press and hold the multifunctional button for 10s, with
earphones on
Play/Pause| Double-tap on the multifunctional button
Volume-| Single-tap on the le multifunctional button
Volume+| Single-tap on the right multifunctional button
Next Track| Press and hold the right multifunctional button for 1.5s
Previous Track| Press and hold the le multifunctional button for 1.5s
Answer/Hang Up a
Phone Call
| Double-tap on the multifunctional button
Reject a Phone Call| Press and hold the multifunctional button for 1.5s
Switch Between Two
Active Calls
| Press and hold the multifunctional button for 1.5s
Activate/Deactivate
the Voice Assistant
| Press the right multifunctional button for three times
Activate the Game
Mode
| Press the le multifunctional button for three times
Q &A
Q1: What does the indicator light of the charging case display?
- The battery life of the charging case:
<10%| The Red light ashes for 3S
---|---
10% < 50%| The Yellow light ashes for 3S50%| The Green light ashes for 3S
80%| The Green light ashes slowly for 2S - Charging status of the charging case:
<20%| The Red light ashes slowly
---|---
21%-69%| The Yellow light ashes slowly
70%-99%| The Green light ashes slowly
100%| The Green light stays on
Q2: How to charge the charging case?
- Connect the charging case to a Type-C charger. (The current does not exceed 1A).
- If the earphones stay idle for an extended period, charge them at least every three months to prevent the battery from being damaged.
Q3: Why are the earphones still connected to the phone when they are put back to the charging case and the case lid is closed?
- Check whether the charging case has battery power. If it has run out of battery, closing it will not disconnect the earphones from the device.
- Make sure the earphones are properly placed in the charging case and the charging metal sheet and PIN are both clean. And wiping clean the contact points on the earphones and the charging case should fix this issue.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ID
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.”
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>