BODEGA JC-145A Wine Cooler Instruction Manual

BODEGA JC-145A Wine Cooler

Product Information

• Model:
  • JC-58A / JC-85A / JC-145A
  • The wine cellar is a cooling appliance designed to store and preserve wine at the optimal temperature. It is important to read and follow all safety instructions and guidelines provided in this manual to ensure proper usage and avoid any potential hazards.
• Specifications
  • Model:   JC-58A / JC-85A / JC-145A
  • Installation: Free standing or built-in (fully recessed)
  • Refrigerant: R600a

Product Usage Instructions

• Unpacking and Install the Door Handle
  • To install the door handle, follow these steps:
  • Remove the exterior and interior packing materials.
  • Remove the gasket at the inner side of the door to expose the two screw holes.
  • Install the handle tightly with the screws and washers provided.
  • Tidy and restore the gasket.
• Installation Instructions
  • The wine cellar can be installed as a free-standing unit or as a built-in appliance. Please refer to the sticker location at the back of the appliance for specific installation instructions based on your model.
• FAQ
  • Q: Can I move the wine cellar while it is loaded with wine?
  • A: No, it is not recommended to move the wine cellar while it is loaded with wine as it may distort the body of the appliance. It is advised to empty the wine cellar before moving it.
  • Q: Can children operate or play with the wine cellar?
  • A: No, children should not be allowed to operate or play with the wine cellar. It is important to keep the appliance out of reach of children to avoid any accidents or injuries.
  • Q: Can I clean the appliance parts with flammable fluids?
  • A: No, it is not safe to clean the appliance parts with flammable fluids as it can create a fire hazard or explosion. It is recommended to use non-flammable cleaning agents for cleaning purposes.
  • Q: Can I store flammable liquids near the wine cellar?
  • A: No, it is not safe to store or use gasoline or any other flammable vapors and liquids in the vicinity of the wine cellar. This can pose a fire or explosion risk.

This manual contains important information including safety and installation instructions of the appliances. Please read it carefully before use and follow all safety information & instructions. It is recommended to keep this manual for easy reference so that you can be familiar with the operation of the appliance.

WARNING

• To prevent damaging the door gasket, make sure to have the door all the way opened when pulling shelves out of the rail compartment.
• The appliance must be positioned so that the plug is accessible. Release the electric cord. Move your cabinet to its final location. Do not move your Cabinet while loaded with wine. You might distort its body. The wine cellar should be installed in a suitable place in order to avoid touching the compressor with hand.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• If the supply cord is damaged, it must be replaced by manufacturer of its Service agent or a similarly qualified person in order to avoid a hazard.

PLEASE DON’T TRY TO PLUG INTO OR EXTENSION THE CABLE IN ANY CASE.

Wine cooler self-checking
The unit will have “bee”,”bee” after power on, this means the wine cooler is self-checking before operation.

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:

• Read all instructions before using the Wine cellar.
• DANGER or WARNING: Risk of child entrapment.
• Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous even if they will “just sit in the garage a few days”.
• Before you throw away your old Wine Cellar: Take off the door. Leave the shelves in place so that children may not easily climb inside.
• Never allow children to operate, play with, or crawl inside the appliance.
• Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.
• Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion. Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction;
• WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those Recommended by the manufacturer;
• To avoid a hazard due to instability of the appliance, it must be fixed in accordance with the instructions.
• WARNING: Do not damage the refrigerant circuit;
• WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are the type recommended by the manufacturer.
• If the refrigerant of these appliances are R600a , Flammable and explosive articles should not be put in or near the cabinet, to avoid the fire or explode caused. -Save these instructions

INSTALL THE DOOR HANDLE

UNPACKING AND INSTALL THE DOOR HANDLE

Remove the exterior and interior packing materials. Install the door handle provided with the appliance by following these steps:

• Step 1 － Remove the gasket at the inner side of the door to expose the two screw holes.
• Step 2 － Install the handle tightly with the screws and washers provided.
• Step 3 － Tidy and restore the gasket.

INSTALLATION INSTRUCTIONS

Before Using Your Wine cellar

• Remove the exterior and interior packing.
• Before connecting the Wine cellar to the power source, let it stand upright for approximately 24 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
• Use a soft cloth to clean the interior surface with lukewarm water.
• This appliance is intended to be used in household and similar applications such as
• staff kitchen areas in shops, offices and other working environments;
• farm houses and by clients in hotels, motels and other residential type environments;
• bed and breakfast type environments;
• catering and similar non-retail applications.
• When disposing your appliance, please choose an authorized disposal site.

Installation of Your Wine Cellar

• This appliance is designed to be for free standing installation or built-in (fully recessed) (Refer to sticker location the back of this appliance).
• This appliance is intended to be used exclusively for the storage of wine or beverages.
• Place your Wine cellar on a flat floor that is strong enough to support it when it is fully loaded. To level your Wine cellar, adjust the front leveling leg at the bottom of the Wine cellar.
• This appliance is using flammability refrigerant. So never damage the cooling pipework during the transportation. Locate the Wine cellar away from direct sunlight and sources ofheat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.
• Avoid locating the unit in moist areas.
• Plug the Wine cellar into an exclusive, properly installed-grounded wall outlet. Do not cut or remove the third (ground) prong from the power cord under any circumstances. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Products service center.

Attention

• Store wine in sealed bottles;
• Do not overload the cabinet;
• Do not open the door unless necessary;
• Do not cover shelves with aluminum foil or any other shelf material which may prevent air circulation;
• Should the Wine cellar be stored without use for long periods, it is suggested to leave the door ajar to allow air to circulate inside the cabinet after a careful cleaning,avoiding possible formations of condensation, mold or odors.

Temperature Limits

Ambient Room Temperature Limits

This appliance is designed to operate in ambient temperatures specified by its temperature class marked on the rating plate.

Description of product model

The standard bottles as below:

• The stated capacity is dependent on the size and shape of standard Bordeaux 750ml bottle with diameter of 2.75″.
• When accommodating larger bottles,you can remove shelves. This will reduce the stated bottle capacity.

WINE STORAGE

• To prevent damaging the door gasket, make sure to have the door opened fully all the way before pulling the shelves out.
• Please store wine in sealed bottles.
• Should the wine cooler be left empty for long periods it is suggested that the appliance is unplugged, and after careful cleaning, leave the door ajar to allow air to circulate inside the cabinet in order to avoid possible condensation, mold or odours forming.
• Recommended Temperatures for chilling/storage your wines.

TEMPERATURE CONTROL

OPERATING YOUR WINE CELLAR AND SETTING THE TEMPERATURE CONTROL
FOR JC-58A/JC-85A/JC145A WINE CELLAR

• Control System Instruction
  • Power switch : After the unit is power ****on, press for 3 seconds to turn on or off the unit.
  • Touch the button , you can interchange the Fahrenheit (℉) and Celsius(℃) display .
  • Temperature setting button : Press ****before adjust temperature. When press it first time, the display flashes and shows the setting temperature. After 5 seconds it shows the measured interior temperature. Press to increase the setting temperature and press to decrease the setting temperature.
  • Display window: 2-digit LED display to show setting temperature or actual interior temperature.
  • Light button : Press ****to turn on or off.
  • Key lock function: If there is no any operation with digital control for 3 minutes, it will be locked automatically. Press and  at the same time for 3 seconds to unlock.

Setting The Temperature Controls

• You can set the temperature as you desire by pushing the “+”or “-”button. When you push the two buttons for the first time, the LED readout will show the original temperature set at previous time.
• The temperature that you desire to set will increase 1ºC/1℉ if you push the“+”button once, on the contrary the temperature will decrease 1ºC/1℉ if you push the “-” button once.
• To view the “set” temperature. (anytime) press and hold the corresponding button for approximately 5 seconds, the “set” temperature will temporarily “flash” in the LED display for 5 seconds.

20℃ /68℉.

The temperature preset at the factory is 12℃/53.6℉.

Attention
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restart the unit. If you attempt to restart before this time delay, the Wine Cellar will not start. If first time use or longer absence of using, the temperature will be different between setting and LED display temperature. After running a period, the temperature will be reverting back.

• Shelves
• To prevent damaging the door gasket, make sure to have the door all the way opened when pulling shelves out of the rail compartment.
• For easy access to the storage content, you must pull the shelves approximately 1/3 out of the rail compartment, however this unit was designed with a notch on each sides of the shelf tracks to prevent bottles from falling.
• Please refer to the following direction for replace shelf with different method.

Type A

• If need to take out any shelf, move the shelf towards the gap on the both sides and alignment with shelf support A. Then lift upwards the shelf and pull out it from the cabinet once the shelf support disengaged from the gap.(Figure A)

Type B

• When removing any of these shelves out of the rail compartment, To fit or remove the shelf, tilt the shelf as per the diagram and simply pull out, or push in the shelf until it sits on the support brackets securely.(Figure B)

BUILT-UNDER SERIES

BUILT-UNDER SERIES (Built under a kitchen table top)

Remark: The above picture is for reference only. Please refer to the actual product.

Installation Specifications

Installation specifications for built-in purposes

• JC-58A
• JC-85A
• JC145A

LOCK & UNLOCK THE DOOR (FOR OPTION)

• Lock is an optional function. If your Wine Cellar has such function, a key should be attached inside the packing of this Manual.
• Insert the key into the lock and turn it counter-clockwise to unlock the door.
• To lock it, please follow the reversed operation. Please save the key well.

CHARCOAL FILTRATION SYSTEM

• Your wine is a living object that breathes through the cork of its bottle.
• In order to preserve the quality and taste of your fine wines, they must be stored at the ideal temperature and ambient conditions.
• Your cellar is equipped with an active charcoal filtration system to ensure air purity, cooling efficiency, and to maintain an odor free cabinet for the storage of your fine wines.
• The filter assembly is located at the rear panel inside your cellar.
• Keep in mind, that this filter must be changed every 12 months and purchase the new one from the distributor.

To replace your filter:

1| Remove the bottles of wine stored on the two (2) shelves in front of the filter.| Turn Left to remove filter.
---|---|---
2| Remove the shelves and set aside to be replaced once you have changed the filter
3| Hold the filter and turn it at 45 degrees in the counter-clockwise direction and then pull it out.
4| Remove the existing filter and replace with a new one.
5| Put the new filter into the hole and then turn the filter at 45 degrees in clockwise direction.

CARE & MAINTENANCE

• Clean your Wine Cellar
  • Turn off the power, unplug the appliance, and remove all items including shelves and rack.
  • Wash the inside surfaces with a warm water and mild solution.
  • Wash the shelves with a mild detergent solution.
  • Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.
  • Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth.
• Power failure
  • Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. If the power is going to be off for a long period of time, you need to take the proper steps to protect your contents.
• Vacation Time
  • Short vacations: Leave the Wine Cellar operating during vacations of less than three weeks.
  • If the appliance will not be used for several months, remove all items and turn off the appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly: blocking it open if necessary.
• Moving your Wine Cellar: Remove all items.
  • Take out the loose items inside the wine cellar (such as shelf), or fix the loose items with the foam.
  • Turn the adjustable leg up to the base to avoid damage. Tape the door shut.
  • Be sure the appliance stays secure in the upright position during transportation. Also protect outside of appliance with a blanket or similar items.
• Energy saving tips
  • The Wine Cellar should be located in the coolest area of the room, away from producing appliances, and out of the direct sunlight.

TROUBLESHOOTING GUIDE

If you feel the appliance is out of order, follow these instructions to try to see if you can solve the problem simply by yourself before calling for service.

The appliance is turned off.

The circuit breaker tripped or a blown fuse.

Wine Cellar is not cold enough| Check the temperature control setting.

External environment may require a higher setting. The door is opened too often.

The door is not closed completely.

The door gasket does not seal properly.

Turns on and off frequently| The room temperature is hotter than normal. Overload of the cabinet

The door is opened too often.

The door is not closed completely.

The temperature control is not set correctly. The door gasket does not seal properly.

---|---
The light does not work| Not plugged in.

The circuit breaker tripped or a blown fuse. The bulb has burned out.

The light button is “OFF”

Vibrations| Check to ensure that the Wine Cellar is level.
Too much noise| The rattling noise may come from the flow of the refrigerant, which is normal.

As each cycle ends, you may hear gurgling. Contraction and expansion of the inside walls may cause popping and crackling noises.

The Wine Cellar is not level.

The door will not close properly| The Wine Cellar is not level.

The door was reversed and not properly installed. The gasket is dirty.

The shelves are out of position.

The control panel does not work| Not plug in The control panel is locked. Please press and at the same time for 3 seconds to unlock.
The unit beeps.| Wine cooler self-checking. It’s normal.

Before disposal of the appliance:

1. Disconnect the main plug from the main socket.
2. Cut off the main cable and discard it.

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

• Guang dong: BODEGA
• Conforms to UL Std. 60335-1 and 60335-2-24
• Certified to CSA Std. C22.2# 60335-1 and 60335-2-24
• Built-in Installation. Leave min.35mm space at back and 10mm at two sides.

WIRING

• MODEL:
  • JC-58A
  • JC-85A
  • JC-145A

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>