Wamarin 1 Phase 2 Wires Smart Electric Meter Instruction Manual
- June 14, 2024
- Wamarin
Table of Contents
Wamarin 1 Phase 2 Wires Smart Electric Meter
Product Information
Specifications
- Model: DAC21C, DAC41C, DAC73C, DAC73C-CT
- Connectivity: WiFi, Zigbee
- WiFi Frequency: 2.4GHz
- Compatibility: Tuya Smart APP
Product Usage Instructions
Button Definition
Button 1: Scroll the page or enter/exit auxiliary screen (press for 3 seconds)
Button 2: Confirm/Shift or move the setting cursor in the setting screen
WIFI Configuration Operation
- Step 1: Complete the wiring according to the wiring diagram and power on the meter.
- Step 2: Connect your phone’s WiFi to the router that the meter needs to connect (ensure it is a 2.4GHz WiFi).
- Step 3: Open the Tuya Smart APP and click the “Add Device” button in the Energy category, then select “Smart Meter (WiFi)”.
- Step 4: Verify the name and password of the WiFi hotspot displayed on your phone, ensuring it belongs to the target router. Click “Next” to proceed with the network configuration.
- Note: Enable Bluetooth on your mobile phone during network configuration for smoother setup.
ZIGBEE Series Configuration Operation
- Step 1: Complete the wiring according to the wiring diagram and power on the meter.
- Step 2: Long press the left button (button 1) for 3 seconds to enter the auxiliary interface. Then, long press the right button (button 2) for 3 seconds to put the meter in network distribution mode.
- Step 3: Open the Tuya Smart APP and click the “Add Device” button in the Energy category, then select “Smart Meter (Zigbee)”.
- Step 4: Select the Zigbee gateway you want to add.
- Step 5: Ensure the electricity meter is in network mode (indicator light flashing quickly) and click “Next” to complete the network operation as prompted.
Button definition description
Button | Definition | Click | Press 3 second |
---|---|---|---|
Button 1: Esc / Scroll | Scroll the page of the displayed page. | 1. In the |
main display screen: enter
or exit the auxiliary screen.
2. In the setting screen: exit or return
to the previous screen.
|
Button 2: Confirm / Shift
| In the setting screen: right move the setting cursor.| 1. In the main
display screen: enter the
setting mode.
2. In the setting screen: enter the
setting state or carry out a confirmation
operation.
3. In the auxiliary screen: reset WIFI or
ZIGBEE
WIFI config operation
- Step 1: After completing the wiring according to the wiring diagram of the meter, then power on the meter.
- Step 2: Connect the phone’s WIFI to the router that the meter needs to connect (make sure 2.4G WIFI, will otherwise cause subsequent config network failure).
- Step 3: Open the Tuya smart APP, and click the Add Device button to select “Smart Meter (WIFI)” in the “Energy” category.
- Step 4: Verify whether the name and password of the WIFI hotspot prompted on the mobile phone interface belong to the target router needing to be connected. After confirming the information, click the “Next” button to operate according to the prompts to complete the operation of the distribution network.
Note: During network config, you are advised to enable bluetooth for your
mobile phone to improve the smooth network config.
Example:
appendix: WIFI status indicator interface
Appendix 1. DAC21C series instructions interface
Note: On this screen, press button 2 for 3 seconds, WIFI will be reset, and the meter will enter the network configuration mode.
Appendix 2. DAC41C,DAC73C,DAC73C-CT series instructions interface
Note: On this screen, press button 2 for 3 seconds, WIFI will be reset, and the meter will enter the network configuration mode.
ZIGBEE series config operation
-
Step 1: After completing the wiring according to the wiring diagram of the meter, then power on the meter.
-
Step 2: First, long press the left button (button 1) for 3 seconds to enter the auxiliary interface, and then long press the right button (button 2) for 3 seconds to make the meter enter the network distribution mode.
-
Step 3: Open the Tuya smart APP, and click the Add Device button to select “Smart Meter (Zigbee)” in the “Energy” category.
Step 4: Select a Zigbee gateway to be added as required. -
Step 5: First confirm that the electricity meter is in network mode (indicator light flashes quickly), and then click “Next” button to operate according to the prompts to complete the network operation.
Example:
appendix:Zigbee status indicator interface
Appendix 1. DAC21C series instructions interface
Note: On this screen, press button 2 for 3 seconds, Zigbee will be reset, and the meter will enter the network configuration mode.
Appendix 2. DAC41C,DAC73C,DAC73C-CTseriesindicator interface
Note: On this screen, press button 2 for 3 seconds, Zigbee will be reset, and the meter will enter the network configuration mode.
How to enter the ” Indicates the network configuration status ” screen:
Under the main display screen, press button 1 for 3 second to enter the screen
of auxiliary display. At this point, click button 1 to scroll the page needs
to be viewed. Under the screen of auxiliary display, can press button 1 for 3
second return to the main display screen. If there is no button operation in
more than 1 minute under the screen of auxiliary display, the meter will
automatically return to the main display screen.
Wiring Diagram
- DAC21C series
- DAC41C series
- DAC73C-CT series
- DAC73C series
Contact information
- Website : www.wamarin.com
- Email: sales@wamarin.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>