GABRIEL SCOTT LUNA Modern Glass Pendant Lighting Installation Guide

: June 8, 2024
: GABRIEL SCOTT

Table of Contents

GABRIEL SCOTT LUNA Modern Glass Pendant Lighting
SAFETY INSTRUCTION
INSTALLATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GABRIEL SCOTT LUNA Modern Glass Pendant Lighting

SAFETY INSTRUCTION

Suspended mount only.
Certified electrician recommended for electrical installation.
A minimum of 2 people is recommended for installation.
Terminal Block not included. Installation may require advice from a qualified person.
Junction box rated for a minimum of 50 lbs or structural blocking required to support fixture.
Structural blocking is required at monoprint locations, and adequate drywall plugs may be substituted.
For all LED fixtures, use only with class 2 power units.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person. Contact the manutacturer for service.
For controllable luminaires, the classification of insulation that has been maintained between LV supply and control conductors shall be provided.. basic insulation, reinforced insulation, etc.

*IMPORTANT: Please provide email confirmation that your order and its related components have been received in their entirety and in good condition. Failure to do so within 7 days of delivery will waive all product warranties.

Provided supplies

Luna Pendant fixture
Hanging template
Male mana points
Universal T-bar
Installation screws

Required tools and hardware

Screwdriver
Drywall anchors suitable for 25Ibs for mono points
4x 2-pole wiring terminals, screws or screwless, 12- lBAWG ( l .0-2.5mm2) rated for 600V, 15A / ex: WAGO 222-412
LED driver; Input: local line voltage, output 24Vdc SELV, 5A, max 60 watt class 2 LED driver

INSTALLATION

STEP 1
If the fixture is provided with stems to assemble, put together the stems using the provided self-locking nipples ( 1 /SIPS) and leave to set for 24 hours. Do not unscrew the stems once assembled. This curing step can be done while the chandelier is installed.
STEP 2
Carefully slide the glass beads over the Luna tubes.
STEP 3
Place the canopy over the threaded nipple and secure it in place with the provided nut.
STEP 4
Using wire terminals, connect the LED driver to the Luna Fixture (Maximum distance 100′. use 12-lBAWG (l.0- 2.5mm )). On Gabriel Scott fixtures, the black wire (+) is positive, and the white wire is negative(-). Next, again using wire terminals, connect the LED driver to the power supply. Finally, attach the universal T-bar and screw the canopy with the provided screws.