PROSAFE XP3000 Chemical Protective Suit Instructions

PROSAFE XP3000 Chemical Protective Suit

Product Information

Product Specifications:

• Abrasion resistance: Cycles > 2000 (EN 530 – method 6)
• Tensile strength: N > 60 (EN ISO 13934-1 2)
• Flex cracking resistance: Cycles > 100,000 (EN 7854)
• Puncture resistance: N > 10 (EN 863 – EN 13034)
• Trapezoidal tear resistance: N > 40 (EN ISO 9073-4 3)
• Seams strength: N > 75 (EN ISO 13935-2 3)
• Resistance to liquid penetration: Not applicable (EN ISO 17491-4 met. A EN 13034)

Product Usage Instructions

1. Precautions before Use:
   Before using the ProSafe XP sleeves, please ensure they are clean and undamaged. Check for any defects or tears.

2. Putting on the Sleeves:
   Slide the sleeves over your arms with the elasticated ends ensuring a snug fit around your wrists and upper arms.

3. Size Information:
   The ProSafe XP sleeves are designed as ONE SIZE fits all, making them suitable for a wide range of users.

4. Care Instructions:
   Do not wash, bleach, machine dry, iron, or dry clean the sleeves. Follow the care instructions to maintain their protective properties.

Frequently Asked Questions (FAQ):

• Q: Can the ProSafe XP sleeves be washed?
  A: No, it is recommended not to wash the sleeves to preserve their protective qualities.

• Q: Are the sleeves available in different sizes?
  A: The ProSafe XP sleeves are designed as ONE SIZE fits all, catering to a wide range of users.

INSTRUCTIONS FOR USE

Please read carefully before using it!
You are required to enclose this information leaflet when passing on the personal protective equipment or to present it personally to the recipient. You may therefore reproduce this leaflet at your own discretion. (1) ProSafe XP is the model name for protective sleeves of polymer-coated fabric with elastication at both ends. (2) Manufacturer of the garment. (3) CE-marking – The sleeves correspond to the European standards for personal protective equipment of categorie III.: Centro Tessile Cotoniero e Abbigliamento S.p.A. (Centrocot), Piazza Sant’Anna 2, 21052 Busto Arsizio VA notified body n. 0624 (Regulation (EU) 2016/425 for Personal Protective Equipment – module C2 and module D). The Notified Body chosen for Conformity to type assessment is Centrocot NB 0624). (4) The European standards for chemical protective clothing define six types of protection, which are symbolized in one pictogram:

• Typ 1 – Gas-tight clothing
• Typ 2 – nongas tight clothing
• Typ 3 – Liquid tight clothing
• Typ 4 – Spray tight clothing
• Typ 5 – Particle-tight clothing
• Typ 6 – Limited splash tight clothing

DS product specifications correspond to the protection types of the European standards. ProSafe XP sleeves offer protection of type PB 3B. The size table combines the body measurements with the standard sizes. (5) The ProSafe XP sleeves are ONE SIZE fits all.

(6) The Symbol of the „Open Book“reminds the wearer to familiarize himself with the „Instructions for Use“. (7) ProSafe XP sleeves are artistically treated and offer electrostatic protection according to EN1149- 1. The person wearing the electrostatic dissipative protective clothing shall be properly earthed. The resistance between the person skin and earth shall be less than 108 Ω e.g. by wearing adequate footwear on dissipative or conductive floors; Electrostatic dissipative protective clothing shall not be open or removed whilst inpresence of flammable or explosive atmospheres or while handling flammable or explosive substances; electrostatic dissipative protective clothing is intended to be worn in Zones 1, 2, 20, 21 and 22 (see EN 60079-10-1 [7] and EN 60079-10-2 [8]) in which the minimum ignition energy of any explosive atmosphere is not less than 0,016 mJ; electrostatic dissipative protective clothing shall not be used in oxygen enriched atmospheres, or in Zone 0 (see EN 60079-10-1 [7]) without prior approval of the responsible safety engineer the electrostatic dissipative performance of the electrostatic dissipative protective clothing can be affected by wear and tear, laundering and possible contamination electrostatic dissipative protective clothing shall be worn in such a way that it permanently covers all non-complying materials during normal use (including bending movements). (8) ProSafe XP sleeves are tested against infective agents according to EN 14126:2003. (9) The five care pictograms indicate:

The performance profile of ProSafe XP sleeves

2

| 6
Tensile strength| N| > 60| EN ISO 13934-1| 2
Flex cracking

resistance

| Cycles| > 100 000| EN 7854| 6
Puncture resistance| N| > 10| EN 863 – EN

13034

| 2
Trapezoidal tear

resistance

| N| > 40| EN ISO 9073-4| 3
Seams strength| N| > 75| EN ISO 13935-2| 3
Resistance to liquid

penetration

|  | not applicable| EN ISO 17491-4

met. An EN 13034

| not

applicable

Resistance to penetration to

liquid

| P| R|  | P| R
Sulphuric acid (H₂SO₄)| < 1%| > 95%|

EN ISO 6530 EN 13034

| 3/3| 3/3
Sodium hydroxide (NaOH)| < 1%| > 95%| 3/3| 3/3
o-xylene| < 1%| > 95%| 3/3| 3/3
Butan-1-ol| < 1%| > 95%| 3/3| 3/3

• P = Penetration incex (%penetrated);
• R = Repellancy index (%repelled);

Remark:
For further information concerning the barrier performances please contact DS. EEC-declaration of conformity available under ProSafe® XP3000 Sleeves | DS SafetyWear.

TYPICAL AREAS OF APPLICATION

ProSafe XP arm sleeves are used to protect employees from hazardous substances or sensitive products and work processes against human contamination. Depending on the hazard potential of the chemical and the exposure conditions, they are used to protect against fine particles and sprays of liquids.

PREPARATIONS

Do not use faulty sleeves. In the event of functional defects, please notify DS. Correct dressing ensures safe handling.

RESTRICTIONS ON USE:
Please ensure that you have selected the appropriate protective suit for your application. If you have any questions, please contact your ProSafe XP sleeves supplier or DS. The decision as to which protective equipment (gloves, respiratory protection, etc.) ProSafe XP sleeves can be combined and how long they can be worn in certain individual cases (about wearing comfort and thermal stress) is always the sole responsibility of the user. DS accepts no liability for improper use.

STORAGE:
The PPE can be stored for at least 5 years (10), provided there are no signs of damage. ProSafe XP arm warmers can be stored in a standard commercial manner, cool and dry, without direct exposure to sunlight.

DISPOSAL

ProSafe XP arm warmers can be disposed of in an environmentally friendly manner either thermally or in landfill sites. The method of disposal depends solely on the contamination during use. (11) LOT NO.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>