inspire MB42-4-1LA Maurice Ceiling Fan with Lamp Instruction Manual

inspire MB42-4-1LA Maurice Ceiling Fan with Lamp Instruction Manual

What in the box

Legal & Safety Instructions

**Assembly

**

Use

WARNING SYMBOLS

Read the instructions carefully.
Lamp
Protective Earth

GENERAL SAFETY INSTRUCTIONS

Read this instruction manual thoroughly before using the appliance and save it for future reference and if necessary pass the instruction manual on to a third party.

WARNING : When using electrical appliance, basic safety precautions should always be followed to reduce the risk of fire, electrical shock and personal injury.

WARNING : If unusual oscillating movement is observed, immediately stop using the ceiling fan and contact the manufacturer, its service agent or suitably qualified persons.

General

Check if the electrical specifications of the appliance are compatible with your installation. Unauthorized use or technical modification to the appliance can lead to danger to life and health. This appliance is for indoor use only except moist or wet room. Means for disconnection must be incorporated in the fixed wiring in accordance with wiring rules into force.

Before pushing the reversible slide switch,it is necessary to stop the action of the blades by turning o the fan. The supplier disclaims all liability for personal injury or property damage arising from incorrect use or installation of the fan.In doupt,call upon an electrician. Children should be supervised to ensure that they do not play with the appliance.

Be careful when working near the rotating blades. Warning: only to be installed outside arms reach.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Electrical Safety
The product should be installed by an authorized electrician in accordance to national wiring rules.

The replacement of parts of the safety suspension system device shall be performed by the manufacturer, its service agent or suitably qualified persons. The mounting of the suspension system shall be performed by the manufacturer, its service agent or suitably qualified persons.

An all-pole disconnector with isolating distance of 3mm must be incorporated in the fixed wiring in accordance with the national wiring rules.

This product is in accordance with safety standards into force. Repairs should be exclusively performed by qualified technicians using original spare parts. Any breach of this instruction may be particularly dangerous for the users.

SPECIFIC SAFETY RULES

The fan base mounting bracket can support a load of 28 kgs.
The fan is to installed so that the blades are more than 2,3m above the floor and the blades distance to wall min 0.6m.

ENVIRONMENTAL PROTECTION

CAUTION!

Electrical products must not be thrown out with domestic waste. They must be taken to a communal collecting point for environmentally friendly disposal in accordance with local regulations. Contact your local authorities or stockist for advice on recycling. The packaging material is recyclable. Dispose of the packaging in an environmentally friendly manner and make it available for the recyclable material collection-service.

APPLIANCE SPECIFICATIONS

TECHNICAL CHARACTERISTICS

2016/2282, EN 60879:2019, EN 60704-2-7:1998

MAINTENANCE / CLEANING

Alway disconnect the appliance before cleaning or doing maintenance.

Never use a wet sponge to clean the appliance.

In order to not damage the product,it is advisable to use adapted equipment to the fragile surfaces and products slowing the wear on the appliance

REPAIR GUIDE

and branch circuit fuses or circuit breakers. Check line wire connections to fan and wires . Check speed controller’s position.
Fan sounds noisy| Top canopy touching ceiling. Loose fan blades screws. Ceiling fan not secured against ceiling. Incorrect speed controller.| Lower canopy form ceiling to ensure minimum 3mm clearance. Re-tighten all screws on fan blades but never over-tighten. Re-tighten all screws in the hanging bracket or plate. Change the controller to one supplied
Mechanical noise| | Allow at least for 8 hours setting-in period.
Fan wobbles| Fan blades are not horizontal to ceiling. Blade screws are loose.| Measure from ceiling to tips of baldes,then rotate fan so all blades are checked for equal height from ceiling(not adjustments may be made by slight pressure up or down on blade holders). Make sure all screws are securely fastened.

GUARANTEE

1. WARRANTY DURATION:
   The general legal warranty applies in accordance with the statutory provisions in force in your country from the delivery of the goods and upon providing the receipt as the proof of the purchase. However, INSPIRE goes beyond that. We want you to have the best experience possible with our products, thus we have extended the warranty periods for all INSPIRE products to 5 years.

2. WARRANTY APPLICATION:
   For the warranty to be applied, the product must have been installed, used and maintained according to the Instruction Manual guidelines.

3. QUESTIONS AND CLAIMS:
   If you have any questions or encounter any problems regarding the use of the product, its performance or visual aspect, you are welcome to contact your vendor through the contact information you will find on the purchasing receipt.

OTHERS (SERVICE, REPAIRING, ETC.)

• Have your product repaired by a qualified person.
• This electric product is in accordance with the relevant safety requirements.
• Repairs should only be carried out by qualified persons using original spare parts, otherwise This may result in considerable danger to the user.
• Please contact the store which you bought the product for after sale services if any question.
• Please contact the store which you bought the product if you lost the installation manual.
• When environmental relative humidity is above 90%,blades have to be slightly bended after 5 years.

Assembly Instructions

Use screwier and dowels suited to your backing.

SPARE PARTS
Some parts of this product can be ordered from your store

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>