WALI TC-B4 Security Dummy Camera User Manual

June 14, 2024
WALI

WALI TC-B4 Security Dummy Camera

CAUTION

  • Powered by AAA battery only, ensure the correct battery polarity, wrong polarity may damage the device. Please do not use the power adapter.
  • A device not installed and used in accordance with the installation manual may damage the device and battery.
  • Ensure camera housing is properly tightened.
  • Any changes or modifications in the construction of this device will  automatically void all warranty

Supplied Part

INSTALLATION

  1. Twist open the camera housing to reveal the battery compartment
  2. Insert 2 x AAA batteries into the battery compartment in the right polarity (Battery not included).
  3. Put the battery compartment back into the camera housing and tighten it.
  4. Put the bottom holes in the designated wall/ceiling position and mark through the hole with your pencil, drill the three holes on the wall/ceiling
  5. Put the provided Screw-Gland Concrete Anchor-(if necessary) into three holes to mount.
  6. Adjust the best camera angle and rotate the circular knob  mount bracket to tighten for stability

Security Dummy Camera
INSTALLATION MANUAL
support@walielectric.com
TC-W1/TC-W2
TC-B4/TC-W4

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals