HOLLYLAND 400S PRO Video Transmitter Price User Manual

: June 14, 2024
: HOLLYLAND

Table of Contents

HOLLYLAND 400S PRO Video Transmitter Price
Product Information
KEY FEATURES
PACKING LIST
TYPICAL SETUP
PRODUCT INTERFACES
INSTALLATION
OLED DISPLAY
QUICK GUIDE
APP DOWNLOAD AND CONNECTION
PRODUCT PARAMETERS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HOLLYLAND 400S PRO Video Transmitter Price

Product Information

Specifications

Model: MARS 400S PRO
Version: V1.1.0
Powered by Hollyland

Packing List
1 TX WITH 1 RX PACKING:

Transmitter x1
Receiver x1
Antenna x5
DC Adapter x1
User Guide x1

SINGLE RECEIVER PACKING:

Receiver x1
Antenna x3
DC Adapter x1
User Guide x1

Product Interfaces
Transmitter:

Antenna Interface
Fan Air Outlet
SDI Output
OLED Display Screen
UP Button
OK Button
DOWN Button
Cold Shoe
USB Type-C Interface
Power Switch
HDMI Input
DC Input

Receiver:

Antenna Interface
Fan Air Outlet
SDI Output
OLED Display Screen
UP Button
OK Button
DOWN Button
Cold Shoe
USB Type-C Interface
Power Switch
HDMI Output
DC Input

Installation:

Install the antennas as demonstrated.
Secure the cold shoe with a 1/4 screw hole at the bottom of the transmitter and mount it to the camera.
Connect the HDMI input or SDI input of the transmitter with cameras by HDMI or SDI cable.
Connect to a power supply (compatible with NP-970 battery or the same series of batteries).
Turn on the devices.

OLED Display
Transmitter:

Device Number
WIFI Signal Strength
Scene Mode
USB Flash Detection Indicator
Device ID
Channel Display
Video Format
Fan Status
Battery Voltage Display

Receiver:

Device Number
WIFI Signal Strength
Scene Mode
USB Flash Detection Indicator
Device ID
Channel Display
Video Format
Fan Status
Battery Voltage Display

ENTER MENU:
Press the OK button for 3 seconds to enter the root menu interlace. Click the UP and DOWN buttons to switch menu options, and click OK, to confirm.

CHANNEL CHANGE:
Press the button UP/DOWN on the transmitter or the receiver to change the current channel. Press OK to confirm the channel number, then the channel of the receiver and the transmitter will be synchronously and automatically changed.

PULL STREAM FROM RECEIVER:

Confirm there is a video format display on both the transmitter and receiver. Use the Type-C to Lan Connector to connect the laptop and RX.
Go to the network settings on the laptop and set it to DHCP mode.
Go to your live stream software, such as VLC Player, OBS Studio, Vmix, etc., and open the network video source via the RTSP URL: rtsp://192.168.218.25:5554.

APP DOWNLOAD AND CONNECTION:

HollyView APP Download
Connecting Method: Enter the WiFi connection interface of the mobile phone and find out the WiFi named as HLD + DEVICE ID, and input the WiFi password to connect (Factory Default Password is: 12345678). After a successful connection, you can have the APP monitoring.

FAQ:

Q: How many receivers are included in the packing list?
A: If you have the “1 TX WITH 1 RX PACKING”, it includes one receiver. If you have the “SINGLE RECEIVER PACKING”, it also includes one receiver.
Q: How many antennas are included in the packing list?
A: If you have the “1 TX WITH 1 RX PACKING”, it includes five antennas. If you have the “SINGLE RECEIVER PACKING”, it includes three antennas.

Thank you for purchasing the Hollyland Mars 400S PRO Wireless HD Video Transmission system. Please kindly read this manual carefully before using it. Hope you have a pleasant experience.x

KEY FEATURES

400ft Transmission Range between TX and RX (LOS)
300ft Transmission Range between TX and APP (LOS)
Integrated Cold Shoe for Quick Installation
Transmission Latency is Less than 0.1s
SDI Input & HDMI Input at TX
SDI Output & HDMI Output at RX
Supports DC Power Supply, USB Type-C Power Supply, and Battery Power Supply
1 Transmitter Supports 2 Receivers (1 Transmitter Supports 1 Receiver and 2 APPs Monitoring, or 1 Transmitter Supports up to 4 APPs Monitoring Without Receiver)
Supports Smart Channel Selection
Supports APP Firmware Upgrade
Direct Data Stream from RX for Live Streaming

PACKING LIST

1 TX WITH 1 RX PACKING

Transmitter x1
Receiver x1
Antenna x5
DC Adapter x1
User Guide x1

SINGLE RECEIVER PACKING

Receiver x1
Antenna x3
DC Adapter x1
User Guide x1

TYPICAL SETUP

1 TX-1 RX SETUP
1 TX-2 RX SETUP

PRODUCT INTERFACES

A TRANSMITTER

Antenna Interface
Fan Air Outlet
SDI Output
OLED Display Screen
UP
OK
DOWN
Cold Shoe
USB Type-C Interface
Power Switch
HDMI Input
DC Input

B RECEIVER

Antenna Interface
Fan Air Outlet
SDI Output
OLED Display Screen
UP
OK
DOWN
Cold Shoe
USB Type-C Interface
Power Switch
HDMI Output
DC Input

INSTALLATION

Install the antennas as demonstrated.
Secure the cold shoe with a 1/4 screw hole at the bottom of the transmitter and mount it to the camera.
Connect the HDMI input or SDI input of the transmitter with cameras by HDMI or SDI cable.
Connect to a power supply (compatible with NP-970 battery or the same series of batteries).
Turn on the devices.

OLED DISPLAY

A TRANSMITTER

Device Number
WIFI Signal Strength
Scene Mode
USB Flash Detection Indicator
Device ID
Channel Display
Video Format
Fan Status
Battery Voltage Display

B RECEIVER

Device Number
WIFI Signal Strength
Scene Mode
USB Flash Detection Indicator
Device ID
Channel Display
Video Format
Fan Status
Battery Voltage Display

A CAUTION

This device supports several power methods, and the device will be charged by the method which has a higher voltage.

The picture on the left shows the symbol of a Type-C power supply, and the picture on the right shows the symbol of a DC power supply.

QUICK GUIDE

ENTER MENU
Press the “OK” button for 3 seconds to enter the root menu interlace. Click the “UP” and “DOWN” buttons to switch menu options, and click “OK” to confirm.

CHANNEL CHANGE
Press the button “UP/DOWN” on the transmitter or the receiver to change the current channel. Press “OK” to confirm the channel number, then the channel of the receiver and the transmitter will be synchronously and automatically changed.

PULL STREAM FROM RECEIVER

Confirm there is a video format display on both the transmitter and receiver. Use the Type-C to Lan Connector to connect the laptop and RX.
Go to the network settings on the laptop and set it to DHCP mode.
Go to your live stream software, such as VLC Player, OBS Studio, Vmix, etc., and open the network video source via the RTSP URL: rtsp://192.168.218.25:5554.

APP DOWNLOAD AND CONNECTION

“HollyView” APP Download
Connecting Method:
Enter the WiFi connection interface of the mobile phone and find out the WiFi named “HLD + DEVICE ID”, and input the WiFi password to connect (Factory Default Password is: 12345678). After a successful connection, you can have the APP monitoring.