Foxelectronics GRB1604 Fox Grejalica Bathroom Heater User Guide
- June 14, 2024
- Foxelectronics
Table of Contents
GRB1604 Fox Grejalica Bathroom Heater
INSTRUCTIONS FOR CONVECTOR
Bathroom heater
FOX GRB1604
Models covered by this instruction sheet:FOX
GRB1604
220V-240V~50-60Hz
IP23
2000 W
Bathroom heater.
IMPORTANT Read these instructions fully before using the heater. Retain
these instructions for future reference.
NOTE: The frost protector with thermostat is for keeping small. It is for use
within the home or for similar purposes. The heater may only be used in a
fixed position and only for the purpose described.
It is not for outdoor use!
SAFETY INSTRUCTIONS (to be read before operating the heater)
- This product is a wall mounting appliance, never use it as portable appliance.
- Do not use the heater unless the feet are correctly attached if the heater is used as portable appliance.
- This heater in designed for wall mounting and must be used with the warm air vent facing downwards. This heater should not be used in any other orientation and should not be used as a free standing portable appliance.
- This heater must be installed so that switches and other controls (except the pull cord) cannot be touched by person in the bath or shower
- This product is suitable for installation on surfaces with normal flammability e.g. wood, plasterboard, masonry. It is not suitable for use on highly flammable surface (e.g. polystyrene, textiles)
- The heater is to be installed so that switches and other controls cannot be touched by a person in the bath or shower.
- Before making fixing hole(s), check that there are no obstruction hidden beneath the mounting surface such as pipes or cables.
- The chosen location of your new heater should allow for the product to be securely mounted(e.g. to a firm wall) and safely connected to mains supply
- Ensure the power supply to the socket into which the heater is plugged is in accordance with the rating label on the heater and that the socket is earthed.
- Keep the mains lead away from the hot body of the heater.
- Do not use outdoors.
- Do not cover or obstruct any of the heat outlet grilles or the air intake openings of the heater.
- Do not place the heater on carpets having a very deep pile.
- Always ensure that the heater is placed on a firm level surface. Ensure that the heater is not positioned close to curtains or furniture as this could create a fire hazard.
- Do not position the heater in front of, or immediately below, a wall socket.
- Do not insert any object through the heat outlet or air intake grilles of the heater.
- Do not use the heater in areas where flammable liquids are stored or where flammable fumes may be present.
- Particular care should be taken when the heater is situated in areas occupied by children or invalids.
- Always unplug the heater when moving it from one location to another.
- Do not use the heater if the power cord is damaged. If the power cord is damaged it must be replaced by a recognised service agent or other qualified person.
- Only use a suitable 220-240V electrical socket.
- The room which is to be heated should not contain any easy inflammable materials (e.g., petrol, solvents, spray cannisters etc.) or other easy combustible materials (e.g., wood or paper). Keep such materials away from equipment. Risk of fire!!
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
OVERVIEW
-
power indicator light
-
temperature control
MAX &MIN: when the room has reached the required turn the right thermostat knob(where included). in an anti-clockwise direction up to the point where the appliance switches off and not beyond ,the temperature fixed in this way will be automatically regulated and kept at a constant level by the thermostat -
power control
- only power on the fan:place the switch to setting 1
- heating at rcduccd power:place the switch to setting .2(1000W)
- heating at full power:place the switch to setting 3.(2000W)
- switching off:place the switch to setting 0.
MOUNTING AND ELECTRICAL CONNECTION
- when mounted,enough space must be left around heater
- get three holes in the wall above the floor(seeing setting sketch A,B,C position),be sure to make the diameter just as same as the expanding pipe, insert plastic expanded pin into all three holes
- fix two screws in the expanding pipe (as sketch A&B position),keep the tips of the screws out for 10mm ,and hang up the machine after the screws are strong enough
- fix the bottom screw on the expanding pipe (as sketch C position)
MOUNTING AREA
Note:
This product is suitable for mounting in Zone 3 or the safe zone of a bathroom
( or similar ) only if a permanent connection to the mains supply is made in
accordance with the requirements of the building Regulations ( including the
wiring Regulations).
If in doubt, consult a qualified electrician.
OPERATION OF THE HEATER
NOTE: It is normal when the heaters are turned on for the first time or when
they are turned on after having not been used for a long period of time the
heaters may emit some smell and fumes. This will disappear when the heater has
been on a short while.
CLEANING THE HEATER
- Always un-plug the heater from the wall socket and allow it to cool down before cleaning.
- Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth. Do not use any detergents or abrasives and do not allow any water to enter the heater.
STORING THE HEATER
When the heater is not used for long periods of time it should be protected
from dust and stored in a clean dry place.
INFORMATION ON THE DISPOSAL AND RECYCLING OF THIS PRODUCT
Please note that your product is marked with this symbol:
This means that the product should not be mixed with normal household waste,
as there are separate collection facilities for Waste Electrical and
Electronic Equipment.