SEALEY APWMW01 Wall Mounted Foldable Workbench Instruction Manual
- June 14, 2024
- SEALEY
Table of Contents
SEALEY APWMW01 Wall Mounted Foldable Workbench
Product Information
Specifications
- Model No.: APWMW01
- Overall Size (W x D x H): Overall Size
- Open: 914 x 620 x 560mm
- Overall Size Closed: 914 x 80 x 560mm
- Workbench Size: 914 x 470 x 30mm
- Model No.: APWMW02
- Overall Size (W x D x H): Overall Size Open: 1100 x 670 x 610mm
- Overall Size Closed: 1100 x 80 x 610mm
- Workbench Size: 1100 x 520 x 30mm
Product Usage Instructions
Safety
WARNING! Ensure Health & Safety, and local authority regulations are adhered
to when assembling and using this product.
- Locate the workbench in a suitable area where it will not be an obstruction.
- Keep the general area clean, uncluttered, and ensure there is adequate lighting.
- Mount the workbench on a flat and solid wall such as breeze block that is strong enough to hold the weight of the workbench and anything placed upon/within it.
- A generic fixing kit has been supplied, but please ensure only fittings suitable for the type of wall this unit is mounted to are used.
- DO NOT attempt to wall mount the workbench on your own. Obtain assistance or use manual handling equipment.
- Wall mount the workbench at such a height that minimizes the risk of injury when used.
- Keep children and unauthorized persons away from the work area.
- DO NOT use the workbench for any purpose other than that for which it is designed.
- DO NOT site the workbench outdoors.
- DO NOT get the workbench wet or use in damp or wet locations or areas where there is condensation.
- DO NOT clean the workbench with any solvents or abrasives which may damage the coated surface.
- DO NOT overload the workbench.
- Ensure that the workbench is properly and firmly assembled and installed before loading it.
Introduction
Wall mounted foldable workbench ideal for garages and workshops where space
is at a premium. Heavy-duty hammered metal workbench with 100kg capacity.
Supplied with 600mm wall mount bracket and hardware pack. Back panel pegboard
design compatible with Sealey TTS Hooks with a 10cm deep gap for tool storage.
Lockable design for added security of contents within. Also features two cable
and plug grommet holes either side for corded tools or power bar. Overall
size: 914 x 620 x 560mm.
Contents
Original Language Version APWMW01, APWMW02 Issue 2 (F) 24/08/23
FAQ
- Q: Can I mount the workbench on any type of wall?
- A: No, the workbench should only be mounted on a flat and solid wall such as breeze block that is strong enough to hold the weight of the workbench and anything placed upon/within it.
- Q: Can I use the workbench outdoors?
- A: No, the workbench should not be used outdoors.
- Q: How much weight can the workbench hold?
- A: The workbench has a capacity of 100kg.
900MM/1100MM WALL MOUNTED FOLDABLE WORKBENCHES
- MODEL NO: APWMW01, APWMW02
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
SAFETY
- WARNING! Ensure Health & Safety, and local authority regulations are adhered to when assembling and using this product.
- Locate in a suitable area where it will not be an obstruction.
- Keep the general area clean, uncluttered and ensure there is adequate lighting.
- WARNING! Mount on a flat and solid wall such as breeze block that is strong enough to hold the weight of the workbench and anything placed upon/within it.
- A generic fixing kit has been supplied but please ensure only fittings suitable for the type of wall this unit is mounted to are used.
- DO NOT attempt to wall mount the workbench on your own. Obtain assistance or use manual handling equipment.
- Wall mount the workbench at such a height that minimises the risk of injury when used.
- Keep children and unauthorised persons away from the work area.
- DO NOT use the workbench for any purpose other than that for which it is designed.
- DO NOT site the workbench out of doors.
- DO NOT get the workbench wet or use in damp or wet locations or areas where there is condensation.
- DO NOT clean the workbench with any solvents or abrasives which may damage the coated surface.
- DO NOT overload the workbench.
- Ensure that the workbench is properly and firmly assembled and installed before loading it.
INTRODUCTION
Wall mounted foldable workbench ideal for garages and workshops where space is at a premium. Heavy-duty hammered metal workbench with 100kg capacity. Supplied with 600mm wall mount bracket and hardware pack. Back panel pegboard design compatible with Sealey TTS Hooks with a 10cm deep gap for tool storage. Lockable design for added security of contents within. Also features two cable and plug grommet holes either side for corded tools or powerbar. Overall size: 914 x 620 x 560mm.
SPECIFICATION
- Model No.:……………………………………………………APWMW01
- Overall Size (W x D x H)
- Overall Size Open :……………………………..914 x 620 x 560mm
- Overall Size Closed :…………………………….914 x 80 x 560mm
- Workbench Size :………………………………….914 x 470 x 30mm
- Refer to instructions
- Wear protective gloves
- Model No.:……………………………………………………APWMW02
- Overall Size (W x D x H )
- Overall Size Open :…………………………… 1100 x 670 x 610mm
- Overall Size Closed :………………………….. 1100 x 80 x 610mm
- Workbench Size :……………………………….. 1100 x 520 x 30mm
CONTENTS
ASSMBLY
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the
EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the
product is no longer required, it must be disposed of in an environmentally
protective way. Contact your local solid waste authority for recycling
information.
- NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
- IMPORTANT: No Liability is accepted for incorrect use of this product.
WARRANTY
Guarantee is 60 months from purchase date, proof of which is required for any
claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk.
IP32 7AR
01284 757500 sales@sealey.co.uk
www.sealey.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>