HIKVISION 8MP Outdoor Poe IP Camera User Manual
- June 14, 2024
- Hikvision
Table of Contents
HIKVISION 8MP Outdoor Poe IP Camera
Product Information
The Hikvision NVR is a network video recorder that allows you to connect and manage your PG camera. It provides a seamless integration between the camera and the NVR, enabling you to monitor and record video footage.
Specifications
- Model: Hikvision NVR
- Supported Cameras: PG camera
- Network Connectivity: LAN
- Supported Protocols: ONVIF
Product Usage Instructions
Step 1: Download and Install Hikvision SADP Software Tool
- To begin, you need to download and install the Hikvision SADP software tool on your computer. This tool will help you configure the camera and NVR settings.
- Download the software from the official Hikvision website: https://www.hikvision.com/en/search/?q=SADP
Step 2: Connect the Computer and Camera on the Same LAN
Ensure that both your computer and the camera are connected to the same
Local Area Network (LAN). Use a network cable to establish the connection
between them. Avoid using WiFi for this setup.
Step 3: Query the IP Address of the Camera
Launch the Hikvision SADP software tool on your computer. The tool will
automatically detect the connected camera and display its IP address. Note
down this IP address for further configuration.
S tep 4: Modify Camera IP Address
- Select the camera IP address in the SADP software.
- Modify the IP address to a value between 192.168.254.2 and 192.168.254.254.
- Set the gateway address to 192.168.254.1.
- Enter the camera password (default password: 123456).
- Select “Modify”.
- Wait for the parameters modification to complete.
Step 5: Connect the Camera to the NVR
Use a network cable to connect the PG camera to the Power-over-Ethernet
(POE) port of the Hikvision NVR. This connection will provide both power and
data transmission between the camera and the NVR.
Step 6: Configure Camera Settings on NVR
- Right-click on the NVR interface and select “Menu”.
- In the configuration menu, navigate to “Camera” and click on “Edit”.
- Choose “Manual” as the camera configuration mode.
- Enter the camera’s IP address (e.g., 192.168.254.2).
- Select “ONVIF” as the protocol.
- Enter the IP camera password (default password: 123456).
- Click “OK” to save the settings.
Step 7: View Live Camera Feed
The camera has been successfully added to the NVR. To view the live camera
feed, select “Live View” on the NVR interface and choose the desired camera
display image.
FAQ
Q: What is the default camera password?
A: The default camera password is 123456.
Hikvision NVR connect PG camera
- Computer download and install Hikvision “SADP” software tool.
Download : https://www.hikvision.com/en/search/?q=SADP - Please keep the computer and camera on the same LAN–Please use a network cable to connect, do not use Wifi
- Query the IP address of the camera through the search tool；
- Modify camera IP address
- Select camera IP address；
- Modify the IP address to be an address between 192.168.254.2—192.168.254.254 and the gateway is set to 192.168.254.1；
- Enter the camera password: 123456；
- Select Modify—Parameters modification completed；
- Connect the camera to the POE port of Hikvision NVR
- Right mouse button–Select Menu –①Configuration–②Camera–③Click Edit–④Choose Manual–⑤Enter 192.168.254.2–⑥Choose ONVIF–⑦Enter IP Camera Password–⑧Click OK
- Added successfully–Choose Live View display image；
Documents / Resources
|
HIKVISION 8MP Outdoor Poe IP
Camera
[pdf] User Manual
8MP Outdoor Poe IP Camera, 8MP, Outdoor Poe IP Camera, Poe IP Camera, IP
Camera, Camera
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>